Can i get month, quarterly, half yearly, yearly wise sales report basing on

hi,
sap gurus,
good evening to all,
how can i get month, quarterly, half yearly, yearly wise sales report basing on division and material.
is there any std transaction code for that.
customization is requried for that.
regards,
balaji.t
09990019711

Standard SAP SD Reports:=
Statistic Group:
Purpose u2013 To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Regards,
Rajesh banka

Similar Messages

How can i get copied to my 14 year-old daughter's text messages without her knowledge?

how can i get copied to my 14 year-old daughter's text messages without her knowledge?

Unless the cell carrier would provide such a service, which if they do would only be available to you if you are the owner of her cell account, then it's not possible without hacking the iPhone, something we cannot discuss here. And if she has the account in her name, then as SeaBeast suggested such hacking may well be illegal. Even 14-year-olds have privacy rights. You would have to discuss that with a lawyer, though.
Regards.

Monthly wise Sales report - Help me

Dear SDN mates
Is there any standard reports for Monthly wise sales report ...the SAP1 , SAP2 reports were not helpful....Does this can be solved by standard reports or it needs to be customized????
kindly help me?

hi,
check VC05 transaction.

Maint. packages daily,weekly,fortnightly,monthly,quarterly,half yearly,year

Dear All,
My client wants to maintain only One Maintenance Strategy for all the Equipments.In that they want to keep following Maintenance Packages.
1) Daily
2) Weekly
3) Fortnightly
4) Monthly
5) Quarterly (Three monthly)
6) Half Yearly
7) Yearly
While creating Maintenance Strategy I am using Strategy key (A - Scheduling by calendar)
In this case what will be the Strategy unit considering above packages because each package is different.
For maintaining Maintenance Package, double click on Packages, here which unit is to be maintained for each above mentioned Packages?
In the same screen, column Initial & Subseqnt is it necessary to maintain. If I donu2019t maintain this what will happen?
Kindly suggest me is it possible to maintain above 7 packages in 1 Strategy for carrying out Preventive Maintenance of Equipment.
Thanks & Regards,
Sandeep

Hi,
For all these you can use day as basic unit, and scheduling indicator as Time- factory calndr,
1) Daily                                            1 DAY
2) Weekly                                        7 DAy
3) Fortnightly                                  15 DAY
4) Monthly                                      30 DAY
5) Quarterly (Three monthly)         90 DAY
6) Half Yearly                               180 DAY
7) Yearly                                      365 DAY
It will work with this combination.
Regards,
N.Nagaraju

Can you get month view on iphone with OS7?

Can you get a month view with ical on iphone with IOS7? I can on my iPad still. I need to be able to look at several calendars on one screen and see where a free slot is in a month and I can't see anyway of doing this now as the month view just shows a date and then you have to go in to it. Thanks.

Hi. Thanks. I've tried that but it's not solving my problem! I want to quickly check 3 or 4 days in a month and see if I availability at different times. The month view makes this easy but I can't see a away of doing it without checking a day at a time and hoping I can remember when I was free on the previous day I checked!! Eg. Someone gives me 3 days to choose from for a meeting. Month view enables me to see all the dates immediately.

How can i get monthly base pay rate for the past 5 months ??

i need to get monthly base payrate for all employees.
for eg; the month salary for a particular employee is listed as follows.
                mar-4500
                apr-4800
                may-4800
                jun- 5000
               july-5000
these are the salary for a particular employess assuming his salary is changed twice. now i need to get all these past 5 months salary.and the effective date changed? in our system payroll will be run bi weekly. if any body has peice of code for this kindly send-very urgent.
Thanks in advamce.
Shiva.

Hi Shiva:
     I am not sure I can completely understand your reqirements, but I assume there are two possibilities:
    1. You need to gather last five months payroll together. You probably need use average wagetype. And yes, it needs some configurations to make it work.
    2. You need to gather information of payroll changed in the past five months. Then you have to use retroactive accounting function and customize PCR to meet your reqirements.
   If possible, pls give more details on your reqirements, for example: what kind of information need to be collected during the payroll, how to process this kind of information.

How can we get purchase req. no in third party sales order

Hi,
I am creating third party order scenario, where i can get purchase req. no in third party sales order.
Regards,
M B Raju

HI
Once you save the Sale order then go to VA02
Double click on the Line item , click on the schedule line tab
under Schedule line tab you can see the Purchase Req. number
Regards,
Prasanna

WebElements Can't get rid of border inside iFrame when CR report is loaded

I am runing reports from the CR Crystal report 2008 view that launches from Infoview and I can't get rid of a border that is in the inside of the iframe when the iframe has a CR loaded within it . (I uploaded screenshots here... https://cw.sdn.sap.com/cw/ideas/4288)
The issue isn't with the iFrame itself. When I just throw an WEIframe on a CR report, I can control the frameborder by modifiying the WEIFRAME function's frameborder setting, toggling it on and off and it looks great.
Where I am having problems is when I put load a CR report inside of an iFrame. I changed the ReportMode to weblayout, I've made the report margins to be zero, removed the scrollbars and menubar. Still, I get that pesky inside border.
I've changed the opendoc sReportMode to Weblayout, gotten rid of preview panel, margins in my CR report, removed toolbar and menu bar from the reports and iframe
Today, we went into our BO Server, found every instance of OpenDocument.jsp and added the frameborder ="0" parameter at the bottom of the script to the iframe definition.
After the changes my BOE Admin restarted the Apache webservices.
Is there something else that needs to be re-deployed or re-started??
thanks!
-Pam

Jamie/Ludek --
Hopefully my post will help you help other people having this issue.
Yes, as it turns out, this issue was not related to WebElements, but was an issue with the CR Viewer.
The KB that Ludek referred me to did have code to add to the web.config, but it didn't do a thing.
Ultimately, I found reference to this ussue bug #ADAPT01417734. A fix was first bundled in fix pack 3.1, but it wasn't completely fixed until SP 4.0. (Known Limitations: There will still be a 1 pixel wide border around the viewer even though the toolbar and drilldown tabs are hidden. The fix for the 1 pixel border will be delivered in Service Pack 4.)
Our server is BOXI R3 FP 2.6 and applying service packs is, in itself, a pain and a risk and requires a testing effort that we couldn't afford right now.
So, I patched my own local instance of CR 2008 to SP4.0 and then pulled the files that were identified as 'fixed' according to the release notes to my BO Server and put them in the correct destination folders:
allInOne.js
dom.js
processindicator.js
psheet.js
ReportAlbum.js
ReportPage.js
ReportView.js
Style.css
Viewer.js
OK, it's a hack, but once I did that, ALL of the gray borders around my weIframes went away!! I can still control a nice little border via the frameborder attribute in the weIframe ()
thanks for your help!

Monthly wise sales report

hai,
     i m working on sales report where in i need to get month wise sales of the products and the related cost incured to company by the sales in the matrix form as shown below can u help me in which way can i get this monthly report
          march     april     may   june    july......feb
mtrl    25            30         0       19      23   ........(mtrl quantity)
cost   30000     15000      0      45000 ..........(amt in rs)
where in the above i m able to get yearly sales in one column (i.e i m able to show for one particular customer total sales in one column) but i m unable to split sales monthly and unable to show in a report so how can i able to sow in this matrix form

Dear Raj,
Please find the code for monthly wise report in PA0001 Table for calculation of Administrator time Recording.
http://scn.sap.com/message/14216250#14216250

My ipod headphones don't work anymore can i get replacment under the 1 year

warranty. first of all i did not break them myself this has happened to the last 2 ipods that i own. is it possible to get replacement earphones, if so how do i get them and who do i contact.
Chris

Where what is? The Apple store? There's many. There's also a list on the homepage of all the Apple stores worldwide. You can also send them in to Apple. They hand them out like candy. Just send in your old ones, or go to any local Apple store, show them your headphones, explain your problem, and you're guaranteed new headphones.
(Why is your Mac's serial number in your signature... ?)

How can I get the View Tab name on the Crystal Report Viewer at runtime?

When a report is displayed in the Windows Forms Crystal Report Viewer and the user drills into the report, the drill down view is displayed in a seperate view and is identified via a View tab at the top of the report. I can determine the index of the view tab that is currently selected, but I need to access the text that is on the View tab. The only properties that I've found that pertain to the "view" on the Crystal Report viewer are the ActiveViewIndex and the ViewCount. Unfortunately, neither of these items help me because they are not specific to a certain section of the report. Has anyone had any luck accessing the View Tab properties ? Thanks.

The tabs at the top of the page are nested within some of the viewers controls. Through trial and error you just have to find the right one. In this case the main part of the report is in the first control. This happens to be a TabControl. From there you can loop through the TabPages on the TabControl to grab the names of the tabs.
Here is a quick example of what I did to get the tab text. All this code was in a button click event.
Control oControl = crystalReportViewer1.Controls[0];
TabControl oTabControl = (TabControl)oControl.Controls[0];
foreach (TabPage oTabPage in oTabControl.TabPages)
MessageBox.Show(oTabPage.Text);

Can't get a figure (chart) from LabVIEW to TestStand report

Hello
I've got a problem concerning getting a figure from a measurement. The code itself works, when I run it from LV it asks for the file name and there are no errors.
The thing is, the chart doesn't show anything. The line (PXI1Slot2/ai0) is a valid line that works (I've triple-triple checked it with MAX).
Also, I did get a figure from it, but I made the stupid mistake of not making a back-up before modifying the LV. What's funny is that I've reconstructed the LV to its working state (to the state before I started messing with it), and it doesn't work. I've tried to reload the LV, and "Unload all modules" in TestStand. Neither works.
I'm really a n00b with LV, so keep that in mind when givin' me feedback.
I've attached the LV I'm using. Any input would be appreciated.
Thanks
- Tapio Perälä
Attachments:
Read cont analog with chart to png.vi ‏27 KB

I have thought about evaluating the Boolean data in TestStand but, as you say, this is a lot of work. What I have been doing is to map the boolean data to integers in LV (very easy) and then use the multiple numeric step type to evaluate the integer array automatically. This feels kludgy and I have tried a couple of times to create a "multiple boolean" step type with little success. I'm surprised TS hasn't anticipated a test returning multiple pass/fail results. I do this all the time for production code.
What I have tried is to copy MultipleNumericLimitsTest data type to a custom type and add a BooleanArray with a data type Array of Boolean[0..empty]. Then when I specify module, I select Step.BooleanArray as the value. The last step (that I know of) is to select Step.BooleanArray as the data source in the edit limits window. At this point if I run the test, I get the error "expect numeric, found boolean" (or something similar). When I look at the properties of my custom step type, the Substeps has DoMultiNumericMeasEvaluation as the Post-Step. I believe this is the root of my problem but I can't figure out how to change this to "DoMultiBooleanMeasEvaluation" or similar. Any Ideas?

There's a pop up that I can't get to close and it's a "problem report for finder"

How do I get it to go away? I can't even update adobe because of it.

>Any advice is appreciated on how to correct it
There seems to be a problem with the switches inside.
You just can disable them by cutting off the wires or use another micro switch instead of the current ones.
*** Say 'Thanks' with Kudos ***

I can't get the App Store in English because I'm based in France

If I change the country of residence to Ireland, then it tells me I cannot use my account to buy stuff.
If I keep the French version, it shows me the french preferred apps first.

tells me I cannot use my account to buy stuff.
Your credit or debit card account must be associated with the same country in which you reside to make purchases from either the Mac App or iTunes Stores.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

How can I get Visual Studio 2010 to work with Crystal Reports?

Hi,
My office upgraded to Windows 7 and Visual Studio 2010 and now I can no longer write front end programs to Crystal Reports version 10. Does anybody know if there is a a workaround? Also, our version of Crystal Reports is 32 bit but the new desktop machine I have is 64 bit so there may be issues accessing the Crystal Reports DLLs which are now located in the Programs (x86) folder.
It's all such a gigantic mess that I don't even know where to begin. Visual Studio 2008 had Crystal Reports in it so it was real easy.
Dave

Try searching first before posting. CR for Visual Studio 2010 download is available on the OverView tab. It's a free install, we don't ship in VS now, it's still a plug in so you can't use VS 2010 Express version, MS doesn't support plugins in Express versions.
Runtime files will be version 13 and should update your app without issues.
Install VS 2010/2012/2013 first and then run the first link in the download page. Don't instlal just the runtime redist MSI, it will not integrate into VS.
Also, set your Project for x86 and not any CPU and use the full .NET Framework and not the client version.
Don

Can i get month, quarterly, half yearly, yearly wise sales report basing on

Similar Messages

Maybe you are looking for