Can I get NetWare drivers for 845 ULTRA ARU?

845 ULTRA ARU is a good mainboard and it's integrated RAID controller PROMISE ULTRA 133 is a fast solution for WIN 2000 server and Linux server applications. But unfortunatelly I can't get drivers for Novell NetWare 5.x. No driver avalilable on PROMISE WEB works...

Thanks Cristian,
Unfortunately what I am using is a Moxa V2101 - it is essentialy a ruggedized netbook computer about the size of a desktop CD-ROM drive, about half of it is heatsink and ports. It's OS is on a compact flash card and data recorded on an SD card.
About the only option would be a usb-Ethernet adapter, I don't know what my chances of finding an intel version of this are, or if LV R/T can see it.
It sounds like I am stuck with Win XPe and LV runtime.
Looks like Microsoft will pick up yet another licence fee for the OS, Not NI.
I will continue to seek a solution with an intel ethernet chipset.
It would be good if NI would support a few more NIC manufactures.
I suspect that this product may have been a convenient spinoff from their PXI embedded PC development.
Tim L.
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

Similar Messages

HT4407 I have Installed windows 7 and didn't made my drivers copy from iOS, I have a macbook air late 2010 model a1237, how can I get the drivers for my mac to support windows 7?

I have installed windows 7
and then searched for drivers then I found on mac support
that I had to burn a copy of the drivers for my laptop
so I had a late 2010 iso version installed on my macbook air.
How can I get a copy of drivers for my version
to work with windows 7.
I have windows 7 installed and working but got no sound, pad is not working
and all the commands + functions are not working as well and camera also
I would highly appreciate any help
specially if someone has a mackbook air late 2010 drivers copy and willing to share with me
Thanks in Advanced
Netsol

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

Oh my lord, where can I get windows drivers for Macbook Pro?....

Does Apple really not have any place that I can download Windows drivers for the hardware in my August 2010 Macbook Pro?!? I am trying to use windows through bootcamp, and I am having tons of trouble. I know there are supposed to be drivers in the OSX DVD that came with my computer, but that is all the way back in Maryland and I go to school in Tennessee.
<rant> Sorry if I seem irritated. I just got over a total hard drive crash in this computer that isn't even 2 years old. I have drives that are almost 10 years old in my PC desktop.. The drive that came stock with my Macbook pro was a total piece of crap in comparison to the cheapest notebook drives at Best Buy. Really Apple?? 5400 RPM 8mb Cache Hitachi drive?? *Pukes in mouth* </rant>

Sorry for the rant. This is what happens everytime I have tried. I actually have a booting Windows 7 partition on here already but it is barely running on the stock/generic windows drivers that are just there to get the OS through install.
I have an OSX 10.6 disk, but it is 10.6.0, and I wasn't even able to make that boot into the Mac installer when I installed OSX on the new hard drive. I had to run my Macbook as a Firewire disk plugged into a Mac Pro and install it from there and update to 10.6.8. I think this was because the 10.6.0 install disk doesn't have drivers for my 2010 revision of the Macbook Pro. I doubt that the 10.6.0 disk has the right Windows drivers if it doesn't even have the right Mac drivers.

How can i get windows drivers for the 2013 MacBook Pro Retina?

Hi there,
today I have installed on my late 2013 MBP retina via the Boot Camp Windows 8.1. The installation was smoothly but some drivers are not present including the wifi driver.
Through online research, I found out that in the current version of Boot Camp no drivers for the 2013 model are listed. Do you have one probably have an idea how to get it to run anyway?

For feedback from experienced users, post in the Final Cut Pro X forum here.
They should be able to offer suggestions for training.
Apple - Final Cut Pro X - Resources

Where can I get missing drivers for cd/dvd on ibook

I got this apple lab top and the cd doesn't work, because the driver is missing. Also, I put in an airport card and can't access internet, I can't seem to configure it. It says it's on, but hasn't joined a network, my network is on the list, but when I go to put in wpa/wpa2 and put in the pass word, it does not accept it. Can someone help me on finding the drivers for this cd and how to configure my airport card. Bill
This is about the best I could do to give you my ibook specs:
Model Family:
iBook G3
Display: 12.1"
Processors: My procesor is 600mhz
600MHz G3 (PowerPC 750FX)
700MHz G3 (PowerPC 750FX)
800MHz G3 (PowerPC 750FX)
900MHz G3 (PowerPC 750FX)
Memory: 128MB PC100 SODIMM
Production:
May 20, 2002 - Oct 22, 2003
Wireless:
Optional: Can't access internet with my airport card
Color(s): White
Original OS: My os is Mac OS X 10.1.4
Mac OS 9.2.2 and Mac OS X 10.1.4
Battery: My battery dies very fast. It dies after leaving it unplugged for a few minutes. So always have to leave it plugged in.
47-watt-hour removable/ Needs a new battery, because it dies when I unplug it.
PowerBook4,3
Resolution:
1024x768
Matte
Graphics:
ATI Mobility Radeon 7500 (16MB)
ATI Mobility Radeon 7500 (32MB)
ATI Rage Mobility 128 (16MB)

Do you have the original system CDs that came with the iBook when it was new?
Do you have access to another Mac which is equipped with FireWire?
With an iBook this old, it could be that the optical drive, itself, has failed.
Also, please note that that model originally had a CD-ROM drive, so it is not equipped to read DVDs unless the drive has been replaced.

How can I get hp drivers for my Deskjet 932C? I am using Windows 7 (64-bit).

Hi: I am having trouble finding a hp driver for my Deskjet 932C. I am using Windows 7 64-BIT
This question was solved.
View Solution.

The drivers are deilvered through Windows Update. You could do the following: before connecting the printer go to Start, Devices and Printers, Add a Printer, (pick any port, LPt1: is fine), click on WIndows Update, then wait for the list to repopulate, the Deskjet 932 should appear under the HP manufacturer list of printers. Now cancel out of this and plug the USB cable in to the printer, the driver should be installed automatically.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Bios updates for 845 Ultra?

Is anyone aware of any pending bios updates for this motherboard or has it been put out to pasture ? I'd still like to see a fix for the warm restart problem when overclocking in addition to the 1.65 core voltage limitation. Before anyone says that those won't be fixed - I can wish, can't I?

I have the 845 Ultra-ARU and I am running my 1.8A at 2.52 GHz with a voltage of 1.71 actual applied volts. This system is rock stable with a fsb of 140. I have done the VID-pin mod, however. I too would also like to see a BIOS update for a couple of reasons.
1) According to the temperatures being reported by PC Alert III, my BIOS, and MBM5, my CPU idles at 50 C and goes up to 67-68 C under a full Prime95 load. The reason why I think this is faulty is because I have run my computer with the side panel off, and there is no difference in the CPU or system temperature. Also, when running the Prime95 test, I've put my hand right on the heatsink and it is BARELY warm. The heatsink is making solid contact with the CPU, so if the CPU was actually at 68 degrees C, the heatsink too would be incredibly warm. My own hand tells me that it cannot be 152 degrees Fahrenheit.
2) THE MEMORY RATIOS ARE GARBAGE!!!!! I've got a 2.52 GHz CPU that is suffering a bottleneck from the measly 2.0 GB/s that my RAM is able to feed it. Every other motherboard I've ever seen gives you the options of a couple different memory ratios. I would at least like the option to run my memory at a different speed than my fsb. Perhaps a 3:4 ratio could be done? Just something so that I can try and get a little more bandwidth out of my RAM. I know that the board is only designed to support PC1600 and PC2100 DDR RAM, but how could it hurt to give the option to support PC2400 or PC2700, maybe even PC3200 DDR RAM? Plenty of other 845 chipset based boards can do that. (Not officially, but through a variety of memory ratios.) I'm just tired of not being able to do anything with my memory.

I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

You won't find them until you are in Windows.
Helps to read even print the guide.
If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
Otherwise, just run that.
Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
Two different ways to get them.

How to get the drivers for Dell PowerEdge M620 in INF format?

How to get the drivers for Dell PowerEdge M620.
We tried downloading
http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-m620/drivers but they are in exe?
How to get inf files for those?

As Jason pointed out, they can be extracted, I believe this can be done with 7zip also... Or you can just install one M620 from scratch, install the Dell drivers and then use this tool:
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to grab the drivers in .inf format.

Where can I get recovery media for Equium A100-549

I need help please, I bought an A100-549 over the internet, it did'nt come with any recovery media.
It now has a serious virus and I need to restore it. Where can I get recovery media for my laptop?
Cheers
perfecto

Hi,
where did you buy it?? On Ebay? If yes then you must contact the person which sold you the machine. If you have no chance to get such recovery, then you will have to contact a
local ASP to obtain a recovery.
If you dont want to obtain a recovery, and you have a genuine Windows copy lying around, then install it, download the appropriate drivers for that machine from the toshiba website and install
them afterwards you installed windows.
Greets

How can I get safe internet for protect my phone and PC

How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone

You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device.

How can I get an invoice for money taken from my card?

How can I get an invoice for the money taken from my card???

Hi
You can login to https://www.adobe.com/account/account-orders.html and print your invoice.
Thanks
-sarabjit

I got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie and now were trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs

i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

HT1904 How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How can I get a service for new powerbook 15" 1.67 screen?

I would like to know how I can get a service for my brand new PB15" screen.
Today I have read an message on the Korean apple forum that New unit of 15" 1.67 doesn't have any line problem.
So, I really want to know whether it is true or not.
If it is, Can I get an exchange for my new 15" 1.67 in India?
Could you help me Apple?
I bought it in Korea 15,Nov, 2005 and Now I am in Mumbai India.
There is a apple international Mumbai in India.
I have a 1 year world worranty.
If the new unit doesn't have any line problem, It means that mine has a problem.
Now I am falling in love with powerbook 15" 1.67 which is my first Mac in my life except line problem.
How can I get a service for it.
Please Help me.

Yes I have read of other reports from people saying theirs are fine. I am really looking forward to purchashing one but I do not want to take a 2000 dollar chance that I might end up with a bad screen. I am still waiting for apple to make an announcement. I have also begun seing reports on some "news like" websites but not really the major ones.

Can I get NetWare drivers for 845 ULTRA ARU?

Similar Messages

Maybe you are looking for