Can I get Numbers to stay on the same spreadsheet when it updates from iCloud?

I have Numbers open on my iMac, my iPad, and my iPhone. When I change an entry, and it updates the other devices, it defaults back to the first spreadsheet. I have a budget spreadsheet, and each month is a new sheet. I have it on October, but when it updates, the other devices go back to January, and at 125% zoom. Also, when I start the spreadsheet, it also defaults back to January. It did not do that prior to the new version.
Can I fix that?

Ayme,
Here are some links, that while old, may be of interest:
http://www.macworld.com/news/2006/06/01/adobe/index.php
http://www.macworld.co.uk/news/index.cfm?RSS&NewsID=14751
http://macnewsblog.com/2006/06/adobeposts_tech_notes_oninst.html
You also, have not reported your version of OSX, in current use. See the following about at least one update that was supposed to help:
http://docs.info.apple.com/article.html?artnum=303771
See also, the following topic in the forum for Intel iMacs:
http://discussions.apple.com/thread.jspa?messageID=3014763&#3014763
You may want to pick a area of this general forum, at the following location:
http://discussions.apple.com/category.jspa?categoryID=189
Also, google, or search in that forum for Rosetta.
Btw, I am experimenting with the beta for CS3, which is Universal Binary, and will run natively on Intel Macs.
Ernie

Similar Messages

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

How can I get iCal not to show the same birthday dates from my iCloud

How can I get iCal not to show the same birthday dates from my iCloud?

You don't need them stored locally for a backup. You can manually export your contacts as archive for backup. Also, if you are backing up with Time Machine, you already have a backup. If your hard drive crashed, you would have to rely on your backup or iCloud anyway.
So, if you're comfortable with that, sign out of iCloud. Choose to delete contacts from the computer. When you sign back into iCloud, you should only have iCloud contacts listed in AB. When you open iCal, you should only have one listing for birthdays.
The other alternative is to disable the Birthday c.alendar and create one manually.

How can I get my ipad to reflect the same playlist order that appears on my computer?

How can I get my ipad to reflect the same playlist order that appears on my computer? My computer has the exact desired order of playlist, but once the system is synced, the ipad does not reflect the propper order.

In iTunes with your playlist shown in the correct order, right-click on the playlist name in the side-bar and click Copy to Play Order. Enable the side-bar with CTRL+S if necessary. Sync. Note also that the column you are sorting on should have the small triangle pointing upwards, otherwise the songs will play in the reverse order. You may also find that you need to first remove, and then add back the playlist to the device if syncing doesn't update it properly. See this post for more.
tt2

Can I get iMovie to stop opening the camera dialog when I connect my iPod Touch?

Can I get iMovie to stop opening the camera dialog when I connect my iPod Touch?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
Check and tell if its working.

I have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

i have 4 ricco md2 mini USB speakers and i can't get them to play at the same time. i have tried using the aggregate device feature but have had no luck. i can play each pair separately, but not together. what should i do?

How can I get my RSS feeds to show up on my iOS devices from iCloud?

How can I get my RSS feeds to show up on my iOS devices from iCloud? The RSS feeds now show up just fine on my iMac.
On my iMac the appear in a category at the same level as In Box, Sent, etc. However the term RSS is in lighter grey like Mailboxes, On My Mac, Reminders. I use Snow Leopard 10.7.5. Any help will be appreciated as I'd like to read the feeds on my iPad 2 and iPhone 5 when I'm away from home.
Thank you.

This is helpful, but how do you get both devices to communicate to this single calendar via the iCloud?...
You did not mention that it must be through iCloud. But then, it can't really do so if you want to maintain separate Apple IDs.
So you just set up an additional calendar on your devices.
iPads, iPhone, Macs can show multiple calendars simultaneously. I have my work calendar and several personal calendars all showing simultaneously on my iPad, Mac Mini and Macbook Pro. In the case of my client, they didn't need multiple calendars. They just were going to use the one shared calendar. But I did setup the shared Google calendar and separate personal caldendars on their iPhones. (e.g.: Husband's iPhone = husband's personal Mac Cal + shared Google Calendar. Wife's iPhone = wife's personal Outlook for Windows Cal + shared Google Calendar.)

How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

I have premier
elements 12
How do I separate audio channels to edit them seperatly ... they are both in the same clip when I record from two diffrent mics on two diffrent channels

timc
I do not see a way to separate audio channels to edit them separately in Premiere Elements (any version).
Premiere Elements does have audio effects including Balance, Fill Right/Fill Left, and Swap channels, but that is not what you are seeking.
I would refer you to an audio editor such as the free Audacity for what you want to do.
Splitting and Joining Stereo Tracks - Audacity Manual
I am not sure if this is close to what you seek
https://forums.creativecow.net/thread/3/883383
But, the opportunity seems to be in Premiere Pro, not Premiere Elements
Please review and consider and then let me your thinking on the matter relating to your Premiere Elements 12 (what operating system).
Thanks.
ATR

How can I stay on the same line when inputting values in the CLI?

The title is a bit vague i know :) but i have this issue which isn't really a problem but it would be better if I can solve it.
Intro)
I've made this simple addition (and more options but thats not relevant) application for kids in my spare time so that they can train their maths in school and compare their results with other students which is saved in the database using the hypersonic DB that comes with the JBoss application server.
Now so far so good, but i'm having an issue with the Scanner (I think, but i doubt its because of the CLI) , when i enter a number or text it works and exceptions will be catched etc but when i press the enter key without anything entered the input value wil be displayed a line below and that's not what I want. I want it to stay in the same line.
Sample CLI output:
bla application
***By: deAppel***
Ver: 31/10/2007
Your name:     deAppel
Your class:     MasterClass
How many sums you want to make? 14
Time: 22:03:27
1: 32 + 40 =     72
2: 38 + 19 =     57
3: 5 + 57 =     62
4: 30 + 20 =     1
5: 57 + 54 =     2
6: 33 + 17 =     3
7: 38 + 54 =     4
8: 23 + 23 =     5
9: 48 + 47 =     95
10: 29 + 55 =     6
11: 48 + 11 =     7
12: 1 + 40 =     41
13: 46 + 35 =     91
14: 23 + 52 =     75
Answer 1:      72     You answered:      72     (good)
Answer 2:      57     You answered:      57     (good)
Answer 3:      62     You answered:      62     (good)
Answer 4:      50     You answered:      1     (wrong)
Answer 5:      111     You answered:      2     (wrong)
Answer 6:      50     You answered:      3     (wrong)
Answer 7:      92     You answered:      4     (wrong)
Answer 8:      46     You answered:      5     (wrong)
Answer 9:      95     You answered:      95     (good)
Answer 10:      84     You answered:      6     (wrong)
Answer 11:      59     You answered:      7     (wrong)
Answer 12:      41     You answered:      41     (good)
Answer 13:      81     You answered:      91     (wrong)
Answer 14:      75     You answered:      75     (good)
EndTime: 22:04:18
Total good: 6
Total wrong: 8
Total sums answered: 14
Final score: 42.857143%
Upload score? (yes/no): no
Compare score from other users? (yes/no): no
Want to try again? (yes/no): no
********Made by: deAppel @ http://www.link removed cause it doesnt matter .com*********
************The application will close within 5 seconds*************
To sum it up for those that don't like to read my post:
1: 32 + 40 = 72
2: 38 + 19 =
whitespace <-- this happens because of the enter
whitespace <-- this happens because of the enter
57
3: 5 + 57 = 62
I want the input to stay in the same line unless you have typed something. I feel silly for not knowing how to handle this.
Hm.. i'll tried to solve it myself but it seems that im unable to do that.
/me takes a quick coffee break and will look at the code again after that *

paulcw wrote:
It sounds like you want either a CURSES implementation (I believe there's one for Java), or just move to a GUI.I was planning to create a GUI for it eventually, but i just wanted to solve this one first and make sure everything works the way i want it too. I'll take a look at the CURSES implementation thanks.

I cannot get skype to stay on the main screen when I click on the icon it shoots off to the right.

I cannot get skype to stay on the main screen it will show up on the bottom in a small window , when I click on it the window shoots off to the right of the screen any thoughts?

smokeyjoe01 wrote:
I cannot get skype to stay on the main screen it will show up on the bottom in a small window , when I click on it the window shoots off to the right of the screen any thoughts?
Hi,
Do you WANT to view other screen DON'T you ?
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to stay on the same space when closing a window?

I love multiple workspaces but ever since I came to OSX a feature is driving me nuts.
Every time I close a window, the previous window comes in focus, and if that window was on a different workspace, the OS switches to that desktop. This can be disabled from System Prefferences > Mission Control > When switching to an application, switch to a Space with open windows for the application.
BUT. I DO want that, when I cmd tab to a window, I DO WANT to go to a different space when I switch to an application. But when I close a window, I don't want my desktop to be flying around like crazy, it's confusing. I would prefer instead of switching to the last application in the stack to switch to the front-most application on the current space (that's natural since it's in there, in front of you). I can do all the switching I want after that. It's not ok if the desktop is flying around on its own, but it's ok if it flies around when I ask it, that's it .
If there's no window on a space after I close something I would still prefer to stay on the same space and switch manually afterwards.
Is there any way to do this?

Here's an approach:
Delete your existing Create button and then redefine it as a copy of Create & Exit.
Then create two Page Branches, one that branches back to your Menu when the Create & Exit is pressed and another Page Branch that remains on your current page when the Create button is pressed.
Jeff

Stay on the same page when applying changes

I have a simple master detail form where we have master form and tabular detail on the second page. The first page has a master form in read only as per standard wizard creation. When I delete and or make changes to the detail the app by default commits and navigates to the master read only page 1. My requirement is to stay on the second page after every update or delete to the detail tabular section . Does anyone have any hints ?

Look at the page branches. There will be one or more which goes to the first page. Change it to go to the current page instead of the first page.

I installed a new printer driver that was missing and now I can't get to my desktop. I can log in but it stays on the same page. How do I boot from disc?

I recently upgraded to Snow Leopard and was missing the drivers for my HP 5000 printer. I got the drivers from HP and downloaded them. When I unzipped the file, my computer went to the login page. I logged in but it stays on that page. Can't get to desktop or do anything. Can anyone help with this?

See if you can boot into the Safe Mode.
Safe Mode - About
Safe Mode

I have a xD-PictureCard that I want to load pictures onto, from my iPhotos. The reader is a FinePix can I get it to work on the Mac. when I try it wont install the software. Is there any way i can load pics onto the SD card.

I have a xD-PictureCard (SD Card) that works in a picture frame. I have used it in the past on a Windows computer, now having an apple I want to change the pics and cannot. When I reload the discs for Mac they won't install. Is there anything I can do to put the pics on the SD card, I don't want to throw away the picture frame it cost a lot of money.

This should be perfectly possible and without loading any software at all.
Get a Card Reader for the XD card, and plug it into the Mac. It will then appear on the desktop. Drg the files to the Card. Make sure you keep the folder structure used on the Card - don't change that.
Regards
TD

How can I get my website to display the same in multipul browsers?

I am having trouble displaying my webpage in different browsers. I have run it through html & css validators and they can't pick up on any faults which would through the site out of line.
When I display the same code on different computers, different aspects of the pages change even though the files are exactly the same.

Start by running your page through the validator:
http://validator.w3.org/
You have some elements which are not nested properly such as scripts running outside of the head and body, required attributes missing, tags missing opening or closing, a <br /> tag in between </td> and <td>. Then you can ignore the stuff about Flash because the Adobe codes for Flash and Spry never seem to validate. Some of the other errors at the bottom like no </body> tag can be ignored because they are there, it just means there is a tag not closed before the end of the body so it generates an error saying the body was not properly closed. The lines below that with tag mismatches will help you determine what is and what is not closed.
If you get that done and still have errors please let us know what browser/version/error you are having an issue with.

Can I get Numbers to stay on the same spreadsheet when it updates from iCloud?

Similar Messages

Maybe you are looking for