Can I get rid of a firmware update?

I just downloaded the iMac G5 Sleep Light Updater and now there is a constant buzzing noise. I have just had to have the logic board replaced, and my iMac was finally quiet as a mouse, now I have this buzzing. Is there some way to get rid of the firmware update?
Any suggestions would me much appreciated!
Kate
1.8 GHz iMac G5, 20"   Mac OS X (10.4.5)   30gb iPod w/video

Hello Kate:
I do not know of any way that you can 'uninstall' a firmware update. For that reason, I am super-cautious abput applying them myself.
A suggestion - take your Mac to the place that did the repair and tell them about the buzzing - it is possible that the firmware update is coincidental.
Barry

Similar Messages

  • HT4623 How can I get rid of this new update and go back to the previous one and how can I register a complaint with Apple?

    How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?

    You can't go back.
    You can leave feedback: http://www.apple.com/feedback

  • How can I get rid of a stuck update which will not install or cancel?

    I asked for updates to add-ons. One update turned out to be for McAfee Site Advisor. I restarted the computer but after restarting the update shows as "This update will be installed when Firefox is restarted" even though it had just been restarted. I tried restarting again, twice, but there is no change. I tried to cancel the install but clicking on Cancel does nothing. So I cannot install the update and I can't get rid of it. What now? The other updates were OK.
    Firefox 3.6.20, XP Home/SP3.
    Thanks.

    If files already have been downloaded then you need to remove the files in the updates and updates\0 folder.<br />
    You can delete active-update.xml and updates.xml as well if present.
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    If there are problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Can't get rid of an unwanted update...

    Since upgrading to Yosemite, I had the usual updates in the App Store for Keynote, Pages, etc.
    But Apple Remote Desktop also showed up as having an upgrade even though I have the latest version.  I did not purchase ARD through the App Store, it was a boxed software with a license code.
    I cannot get the badge to go away showing that ARD has an upgrade.  If I click on "Upgrade", it tells me that the software is either already installed, or was not purchased by this user ID.
    How do I get rid of this annoying badge and indicator in the app store for an app that is already the latest version and doesn't need anything done to it?

    Welcome to AD!
    You can't get rid of it, but you can ask iTS support to remove it from your download queue.
    http://www.apple.com/support/itunes/store/browser/
    It might just be easier to let the thing download and then delete it, quite frankly.

  • I can´t organize files on my Zen Micro using MP10 (and can I get rid of the firmwar

    Hi, I installed the software that came with the Zen, the first one hung up my computer (forgot what it was called) but media explorer seemed to work ok. I was recommended to install the firmare so that I could transfer files using MP0. I did this (one of the earlier versions). I drag and drop my music folders into MP0 and sincronize but when they are transfered I get new folder created with new names onto my Zen (album names, song names etc.) everything disordered and many folders with only one song in them. I can't seem to figure out how to organize my music. Is there a way of reformatting the player, get rid of the firmware and make it work properly with media explorer again (since media explorer doesn?t recognise the player after the firmware instalation) Please help, the sound quality of this player is great but music transfers and organizing is giving me a big headache.

    Ear-Rock,
    You can download the version of Zen Micro Media Explorer that support the MTP firmware you have now on the player. The version is 4.00.8 and is available on the website. You can also change the firmware to the PDE one by downloading and installing the PDE firmware version .02.05.
    Jason

  • I can't get rid of thanks for updating firefox or add-ons at start-up

    Every time I start Firefox, in addition to my home page, I get "thanks for updating" pages from Mozilla, Colorful Tabs, No Script, and Undo Closed Tabs Button. I have tried all of the usual methods for getting rid of them (resetting home page, et al) and nothing works short of removing the add-ons (and that doesn't work for the Mozilla page!). It's not only annoying but it significantly slows Firefox down.
    I love Firefox and have been using since its early days and I don't want to stop now but this inability to control it is frustrating and, frankly, disappointing. I do hope the trend to become more like other browsers does not gain speed; for many users, the very fact that Firefox was not like the others is what drew us to it in the first place.
    I'd appreciate any help to solve my dilemma.

    hello, this might happen when firefox is not able to properly save preferences in its profile folder. please try this: Click the ''menu ''button and then click ''help (?) > troubleshooting information > profile folder - "show folder"''. then a new window will open up. in this window look out for a file named '''user.js''' (it might be used to overwrite your custom settings). in case it is present , delete or rename this file and restart firefox afterwards.
    for more information and other steps please also see: [[How to fix preferences that won't save]]

  • Can't get rid of Perian software update window in the center of my screen.

    When I woke up my computer this morning, there was a Perian software update window right in the center of my screen.  I cannot get rid of it and don't want to install it.  No matter what I push...it won't budge.  My choices are Skip this version, remind me later or install update...as I said I don't want to install it...how do I get rid of it ?

    Hi, and welcome to Apple Support Communities.
    Click on "Skip This Version."
    If that doesn't get rid of it, hold the power button down until the MacBook shuts down. Then start up again.

  • How can I get rid of a windows update deployment package?

    We are using SCCM 2007 with a primary site server and four child sites.
    I created a windows update list with a source directory and package. 
    Distributed the package to my primary site server and then from a child site distributed to a long list of distribution points on the child site and three other child sites below it.
    This all worked fine we used the list and package to deploy security updates and added to the list each month, automatically distributing to all sites and distribution points.
    One month the distribution failed on one  child site, all the other sites and distribution points got the refreshed package no problem. (Probably caused by the backup running on that site.)
    This became a permanent problem which we finally fixed by creating a new list and package.
    Now I'm trying to do a cleanup of the old package and partially failed distribution.
    I've started by deleting the package from the primary sites distribution point.
    Next from the child site where the package status is unlocked, I deleted from all the other distribution points.
    The child site shows that the package distribution points have been deleted.
    Unfortunately above and below the child site the package distribution points are still listed and locked.
    (Looking at one of the listed distrubution points the package is on the server.)
    Sorry for the big speech, does anyone know how to remove from the other distribution points and so be able to delete the package?
    Any help or redirection would be great. 

    I don't have an answer, but I sure do have a question!! 
    I acquired the hacker in January.  In February both of my computers were destroyed.  I removed ALL forms of networking from my house -- TWC, all of my routers and adapters, etc.
    I went to Best Buy and bought a new computer, then another, then 2 more -- all getting hit with a prefab image upon getting close to my doorway.
    I am losing my home, etc, because I haven't been able to work in months.  This hacker finds me at the library, and wherever else I try to work, and he messes withmy typing, stalls my screen, empties my USBs.
    I believe I am the victim of remote deployment, but how do I find where/who it is coming from?
    I used my (corrupt) Gateway recovery disks the other day and watched how ActiveX and other rd tools were listed.
    PLEASE, this has been going on for too long.  After  i gave up on computers, my house has been entered nearly every day.  The police literally think I am insane.
    What can I do to get out of this deployment?
    Might there be a network in my  home that I am unaware of??  If so, is it likely in the cable, the tv, the fire alarm, what?
    Warm regards,
    Angel
    None
    None

  • How can I get rid of this Lollipop update?  My phone drains faster than it can take a charge!

    I've just spent 4 hours on the line w/ Verizon support agents who were all very nice, but nobody could solve my problem.  Without anything else happening on my phone, I hit an icon to launch an app, and it takes like 2 minutes for anything to happen.  The battery drains faster than it can get charged in SAFE MODE!
    Is there a way to go back to the old OS without rooting?

    Thanks.  I have been using the built-in battery monitor as well as the application manager.  It helps seeing the processes that are chewing away at your phone's RAM and battery, but at this point, it's not even helpful anymore.
    I don't think 'Samsung.Settings' is something I can disable on my phone and that is what's hogging up 80% of my phone's resources.  (Fresh boot and all)
    What really irks me is that I've never signed up to be a BETA tester for Samsung which is basically what we all are doing... Factory reset, remove all apps, add each app back individually, find what app(s) are causing the problems, etc.
    No - this should have been vetted out long before they decided to push out an OS update that has no backward motion of loading the previous OS...
    <Rant off>

  • How can I get rid of a frozen updates window? I tried uninstalling/reinstalling latest software/rebooting. Window shows up whenever I try to open Firefox and will not close.

    When I try to open Firefox I get an updates window for Cool Iris and Cool Previews. Options for 'skip', 'install,' 'more info,' 'x' to close window, nothing responds. I have to use the Mac 'Force Quit' command to close Firefox and get it off my screen. Can't minimize it either.

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Can't get rid of iPad 2 update notification number.

    A few days ago my update notification appeared (red circle with the numeral one) next to the App Store icon. When I click on "app store" and go to the update page there is nothing to update. Have an iPad 2. Any suggestions?

    A couple of things taht you might consider:
    Check your network or cellular connection to make sure it is good. RTry again when you can get a better connection.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.
    Download an app - any app such as a free one or one you have already purchased but deleted, for example.

  • I can't get rid of an obsolete update

    Running 3.6.16, my help menu shows "Apply Downloaded Update Now". If I select this, nothing much happens and FF asks to restart, upon which the Help menu still has the same item. I had to upgrade to 3.1.17 by hand. I want to know: what files (and where are they) do I delete to make "Check for Updates" work normally?

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    C:\Users\&lt;user&gt;\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • I can't get rid of firmware for WRT54RS flashed on WRT54GL router

    Today I tried (unsuccesfull) to reset my router back to factory default.
    Unfortunately I found that the IP address did not reset to factory default.
    But I still can ping the device.
    So I checked the firmware by logging into the device.
    B.t.w the admin account credentials changed back to factory default.
    First I checked the model of the router and compared that with the firmware within the device.
    Then I found the mismatch, the device specs say it's a WRT54GL and the installed firmware says it's WRT54GS.
    This seem to be some custom made firmware of some kind.
    In the administration section, I found that the firmware update tab is missing.
    I then googled for some methods trying to flash the device with the appropriate firmware.
    At first I tried the 30/30/30 reset procedure, after reboot still the same settings, so no luck here.
    Next I tried tftp with the appropriate firmware version.
    After specifying the location of firmware, entering the device password (which happen to be the default due to earlier reset), I then hit the start button.
    Some leds start to flicker, then after about 20 seconds the error text occur "unable to get a response from the server".
    So I can't get rid of this mismatch firmware here.
    What do I do next?
    How about jtag?
    Assumption is the cause of all misery

    Hi wrtlinksys-user, you can try to do a funny reset on the router. To do it, just press and hold the reset button on the device for 30 seconds and when you reach 20 seconds while counting, simply unplug and replug the power adapter of the router. Update us if this will help you.

  • My friend's apple ID shows up when I want to update my Apps. How can I get rid of it and see my own instead?

    On my iPhone I see my friend's Apple ID when I want to update my Apps and can't seem to login with my own. What's wrong? How can I get rid off my friend's ID and login with my own when I want to update or download apps? I went to Itunes Store in Setting and checked if my ID was still there, and it is so I have no idea what's wrong.

    lol_maker wrote:
    Just used her MacBook to unlock my iPhone as I was away from home. So she backuped my phone and restored it to allow the unlock to work. That's all.
    I'm still not clear about what you mean about unlocking your phone. Normally, "unlocking" means entering the password if the phone is locked, which you should be able to do from the phone itself. If you want more help with this, you really need to take the time to furnish all the relevant details.
    I have a MacBook Pro, and yes when I connect my iPhone on it it shows up in the devices list.
    When you do that & click on the iPhone in the list, then click on the "Apps" tab at the top, do you see the apps you can't update listed there? If you click on the "Store" menu item does it show near the bottom that you are logged in with your own Apple ID?
    As wjosten said, it sounds like one way or another, the apps you cannot update were obtained using your friend's Apple ID. You need to delete them from your phone & try buying them again. If they were in fact paid for with your own Apple ID you won't have to pay again; otherwise you will.

  • Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?

    Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?

    Hello,
    Yes, you can delete it.
    But, the Adobe folder you want to remove is actually the setup for Acrobat. So, you might save it at some other location so that if in future you need to re-install the software, there is no need to download the entire product.
    Regards,
    Anubha

Maybe you are looking for

  • Error code: 0xc0000098

    Hi, I am trying to install Windows 7 via PXE Boot but I am having problems. I have Configuration Manager 2012 R2 installed on Windows Server 2012 R2 with SQL Standard 2012 When I press F12 to PXE boot the test laptop I am receiving the following erro

  • OrdImage Uptake in ADF UI thru ADF BC

    JDeveloper 11.1.2 and ADF BC: Hi, We have a OrdImage as part of Oracle DB and we would like to show the image in the ADF UI. We are able to show the image in the UI - if we are showing a single row (UI is shown as an ADF Form). The CustomInputHandler

  • ATG Community is read only and will be decommissioned on September 29

    After Sep 29th, we will not have access to read-only ATG community as well?

  • OS Authentication & OO4O

    Is it possible use OS Authentication with OO4O? How? Thanks

  • Problem in number range assignment to equipment category

    Hi Gurus, I have created equipment categories & now want to maintain no. range for them. But by mistake i have assigned the categories to standard no. range group (PM) .Now i want to reverse it by deassigning to its original place.Please suggest me t