Can I get software from a disc on to my ipad

I am after using a USB device on my iPad. I'm assuming I can get an adaptor to use a USB but the question I have today is is there a way of getting the software that drives the device, which is on a disk, on to my iPad?

You can transfer different kinds of media.Movies,pictures,music etc.You have to have the kind of app that can run that media.I suggest iMPlayer HD.That's what I use on my iPad.Follow these steps:
1.Plug in your iPad and open iTunes.
2.Put the disk in the computer and open the folder where it's media is stored.
3.In iTunes go to iPad>Apps>File Sharing Apps and sellect the app
4.Drag the file in the column on the right
5.Wait for it to transfer and then enjoy it

Similar Messages

How can I get software from a disc onto my macbook air which does not have a disc drive.?

I have macbook air with no disc drive. However, I recently was given some cookbook software as a gift and it is in disc form. Wondering if there is an easy way to get this new software onto my mac. Was hoping I could upload the software to another PC and then burn it to a thumb drive and switch it over that way.Thoughts on if this is doable??
Thanks!

Apple Superdrive
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
This one is only $35, I have it and its well made, and works on Mac
http://www.amazon.com/LG-Electronics-Portable-External-GP60NB50/dp/B00C2AMK2M/re f=sr_1_1?ie=UTF8&qid=1385882859&sr=8-1&keywords=lg+external+usb+dvd+drive

How can i get photos from camera or computer on my ipad

how do i get photos from my camera or computer on my ipad for editing?

You can sync photos from iTunes, you can use WiFi transfer apps or you can use the camera connection kit to transfer photos.
iOS and iPod: Syncing photos using iTunes - Support - Apple
iPad: Using the iPad Camera Connection Kit - Support - Apple
One example of a WiFi transfer app
Wireless Transfer App - Share and transfer photos and videos via ...

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

HT2604 I can't instal software from applications instal DVD! please help me!

I can't instal software from applications instal DVD! please help me!

hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
Thanks so much

Can't get sound from my midi channels

Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
I've checked my outputs, etc...but nothing.
Please help me!!! I'm desperate!
Thanks

Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

HI wvpearson.
You can download the Mac OS X drivers for the imageCLASS D420 from the Canon USA website. Please click the link below:
imageCLASS D420 - Drivers & Software
Once you are at the site, your operating system will be automatically detected. Select DRIVERS and download the files listed.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). Have a good day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.

Premiere element 9: How can I get rid of a disc menus without replacing it?

Premiere element 9: How can I get rid of a disc menus without replacing it?

Thank you Bill, this is exactly what I needed.
Date: Mon, 24 Jan 2011 09:00:39 -0700
From: [email protected]
To: [email protected]
Subject: Premiere element 9: How can I get rid of a disc menus without replacing it?
Welcome to the forum.
In the DVD/BD tab, just set to Autoplay, and all Menus will be removed.
Hope that is what you are looking for, and good luck,
Hunt
>

Can't get video from camera update / suggestions?

As I think others have reported, I have lost my ability to participate in iChat AV video sessions, and any attempt produces a "can't get video from camera" error message. I am running OS 10.4.5.
I have an extra internal hard drive with no OS on it, so I did a clean install of Mac OS 10.4 and iChat was back to working. I then applied all the Apple Software Updates to bring it up to 10.4.5 as well as any othe Security Updates and such, and it is still working OK as long as I boot off that OS.
This tells me the problem cannot be in my Router or DSM Modem, I think.
In the past, I have had ShowMacster and iGlasses installed on my original system, but I believe that I have uninstalled both of those properly. Still does not work.
I DO have Apple Remote Desktop - Admin installed on this startup volume, and I cannot say for sure whether the problem may have started around the time I installed it. It's possible, I just wasn't keeping chronological records of installs back then.
So, the GOOD news is that I can participate in any iChat AV session I want to be in as long as I have prior notice or enough time to reboot my G5 PowerMac under my second drive, but I still can't keep iChat AV open on my main drive and expect to be able to respond to impromptu invites to a video session.
I thought I may have read that Apple Remote Desktop can create a conflict. If anyone knows, I would be all ears! Thanks for any suggestions.
Jim Foster
Hampton, Ontario, Canada
Dual 1.8 Mhz G5 PowerMac Mac OS X (10.4.5)

I believe I have solved the mystery of why I was getting the "can't get video from camera" error message. I had said earlier that I had Apple Remote Desktop (admin) loaded on my Mac but that I did not normally have this application open. What I failed to realize, though, was that for some reason I also had Apple Remote Desktop set to ON in my Sharing System Preferences pane. All I had to do was to uncheck this box and my ability to carry on video chats returned.
I expect that somehow in the process of installing and running the Apple Remote Desktop application to access another Macintosh on my home network, I must have either manually or automatically caused Apple Remote Desktop to be turned ON as if I was wanting to allow some other Admin user to connect to my Mac. Doesn't make much sense to me, but I am happy with the solution.
Jim Foster
1.89 Mhz dual G5 PowerMac Mac OS X (10.4.5)

Isco Secure Services Client version 4.0 - where can I get it from ?

Gents, Does anybody know where I can download this software from ..? I have used it several months ago from meeting house when it was called AEGIS SecureConnect 4.0 ( now been acquired by CISCO) .. from The Cisco software center is says unavailable as yet .. any ideas ..? I have a copy of AEGIS SecureConnect 4.0 but I am wondering whether cisco supports it or do I need to get the one with the Cisco footprint ..?
Appreciate any input ..

check the following url
http://cisco.com/public/support/tac/tools.shtml
But you need valid contract with cisco to download these versions.

My computer will only run CS3....where can i get this from?

My computer will only run CS3....where can i get this from?

Simon,
You may try to buy elsewhere. You may come across offers of new and unopened box sets, and used ones. There is quite a number of rules concerning the legality of taking over Adobe software from others, in some cases requiring a licence transfer.

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

How can I get values from listbox?

Hi all,
I need to get price values from Price List (Inventory -> Item Master Data screen). It's important to get values from field 'Price' BEFORE item will be added/updated.
How can I get values from Pricelist listbox?
Thanks for any suggestions or short sample code.
Best regards,
Andy

Hi Andy
Here is som sample code that will get the description of the price list and also the price that is displaying at the time. The item master must be open for this snippet of code
Public Sub GetItemPriceFromOpenWindow()
        'this is assuming item master is open
        Dim oEdit As SAPbouiCOM.EditText
        oEdit = SBO_Application.Forms.GetForm("150", 1).Items.Item("34").Specific
        SBO_Application.MessageBox(oEdit.Value)
        Dim oCmb As SAPbouiCOM.ComboBox
        oCmb = SBO_Application.Forms.GetForm("150", 1).Items.Item("24").Specific
        SBO_Application.MessageBox(oCmb.Selected.Description)
    End Sub
Hope it helps

Can I get software from a disc on to my ipad

Similar Messages

Maybe you are looking for