Can i get some answers?

Hey forum,
So seeing as Fibre broadband has been pushed back again, i just wanted to know a few things if that is possible.
1. Does the FTTC cabinet HAVE to be in a specific location?
2. Is there a way i can locate my current ADSL cabinet?
3. Openreach are having trouble with local authority about the location of the new cabinet, im in Dartford and wondering is there a someone who deals with rollout in the Dartford area i can talk to?
Thats it for now.
Thanks for your time and i hope to get a reply soon.

Spooks136 wrote:
Hey forum,
So seeing as Fibre broadband has been pushed back again, i just wanted to know a few things if that is possible.
1. Does the FTTC cabinet HAVE to be in a specific location? Yes. It needs to be near to the ADSL cabinet that it is serving.
2. Is there a way i can locate my current ADSL cabinet? Use this link to find the cabinet number then go for a walk looking for it. The number will be painted on the cabinet. https://www.btwholesale.com/includes/adsl/main.html
3. Openreach are having trouble with local authority about the location of the new cabinet, im in Dartford and wondering is there a someone who deals with rollout in the Dartford area i can talk to? It is Openreach who do the upgrade. They will not speak to members of the public, only ISP. You might be able to get your local council or local MP to contact them and ask questions on your behalf. See further info below.
Thats it for now.
Thanks for your time and i hope to get a reply soon.
Up until recently you could email Openreach and ask when your cabinet was likely to be upgraded however Openreach are no longer giving out that information, instead they are replying:-
Thank you for your contact to us. Please note that we will not be responding to you by email but, would like to point you to the Openreach Superfast Fibre website and the FAQ section that will provide answers to the most commonly asked questions. It will also provide links to those service providers that sell fibre broadband at the moment so you can check if your particular line is enabled.
http://www.superfast-openreach.co.uk/where-and-when/
So in short, you just need to keep checking to see if your cabinet has been up graded.
If you use this checker it will tell what cabinet you are on and what services it can receive
http://www.dslchecker.bt.com/adsl/adslchecker.welcome

Similar Messages

  • I can't get an answer to this. I have a 120 gb iPod. Way too much to put my music on my iPhone. Is there a way to just put some of my music on my iPhone?

    I can't get an answer to this. I have a 120 gb iPod. Way too much to put my music on my iPhone. Is there a way to just put some of my music on my iPhone?

    Playlists on the iPhone are the same as on the iPod. Just connect the iPhone and go to the iPhone Music tab in iTunes. You can check the playlists you want on the iPhone.
    One "trick" is to create a new playlist and just drag all of the music you want on the iPhone to this playlist, then sync only that playlist.
    Another option is to use the "Convert higher bit rate songs to 128kbps AAC" on the iphone Summary page in iTunes. This will compress the music and you will lose some quality, but unless you are using $500 headphones you won't notice.
    The manual is in Safari on your phone; its a predefined bookmark. You can also download a PDF:
    iPhone User Guide (For iOS 6.1 Software)

  • Where can I go to get some answers?

    I have spent several months and enumerable hours on learning and building my website.  It is going to be an e-commerce site, by which I sell motorcycle accessories.  I have approximately 175 pages.  So, now its time to get a shopping cart from godaddy and they are telling me that all of the 170 product detail pages I have created are useless because the shopping cart creates all of the detail pages.  Further, with their shopping cart I am unable to make it look like my website.  So, now I am utterly confused as to whether I need a web design program like DW to create a site or do I just need a shopping cart.  What's the point if one is not consistant with the other.  
    I would just like to know if there is someone I may be able to correspond with on the subject in order to figure this out. If not, perhaps someone could point me in the direction for answers. 

    Thanks for the info.  I believe you are right about saving me the time and frustration. 
    Date: Sat, 12 Mar 2011 07:18:12 -0700
    From: [email protected]
    To: [email protected]
    Subject: Where can I go to get some answers?
    Michael, I suggest that you find a website developer to consult and help you with your project. An e-commerce site (especially one with as many products as yours) just does not strike me as one which is easily administrated by someone who has the limited experience with web design, development, and administration that you described as your skill set.
    I suggest this because I want to see you succeed with your enterprise, and there are a lot of potential landmines in front of you that a more experienced developer can help you avoid. There are a number of different, and good, shopping cart services out there, and one or more of them may offer you the level of customization you want. (And they may, or may not, be supported by Go Daddy.) But please save yourself time and frustration by finding a good collaborator. It'll end up being one of the best business decisions you will ever make.
    >

  • I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

    I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

    You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

  • I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

    I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

    Lmwilliamson wrote:
    Kernel panics:
    After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists. 
    I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
    I am able to use my computer in Safeboot mode (only)
    Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
    If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
    If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
    Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
    ..Step by Step to fix your Mac
    Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

  • I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

    Hello,
    I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
    -1074397150 occured at IMAQ snap.vi
    Possible reasons,
    NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
    Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
    d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
    Anyways, thanks,
    Brian

    Brian;
    There is an example on how to display images in LabVIEW without having the full IMAQ application.
    You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
    About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
    Regards;
    Enrique
    www.vartortech.com

  • HT5622 i moved from Egypt to Canada, changed my info on app and still can't get some app because " item not available in the Egyptian store"

    i moved from country to another, changed my info in app ID and still can't get some apps because  item not available in the home country's store? any idea?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • I can only get some of my iPhone 4S pictures to show up in photo stream on any of my devices?  How do I get them all to show up?

    I can only get some of my pictures to show up in photo stream on any of my devices. How do I get them all to show? 

    PC, I also rebooted the wireless.

  • Can't get some songs off my ipod!!

    For some reason I can't get some songs off my old ipod. recently I lost all my songs on my new ipod so I went to my old ipod followed the steps of extracting files from ipod to itunes and come to find out that some songs didn't go into itunes. The files I want were downloaded using imesh and they are mp3 format. For some reason when I go into my computer and open my ipod's music folder the songs are not there yet they have to be because I can see and play them on itunes when I connect the old ipod.But I can see one of the files in a folder except that one file is really the entire album. It's about 13 songs and I can't seem to seperate them. So is there anyway to directly transfer all files from the ipod to itunes instead of doing the copy folder steps as described in apple's "transferring music guide"? Also I tried consilidating library and that didn't work either.

    There is a manual method of accessing the iPod's hard drive and copying songs but not playlists back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    iGadget Windows Only

  • I May Finally Be Getting Some Answers

    After a day of going around in circles, I'm finally getting some answers on my whole "trust market" problem, and it looks like the error could be Verizon's.
    When I ordered my MiFi last month, I did so online, and for some reason, their computer assigned my MiFi an Alma, Michigan phone number.  Alma is in Gratiot county, which is a county to the north of me.  I live in Clinton county.  This is important due to the following:
    I spoke with a sales person at the local Verizon dealer, and he informed me that my city (St. Johns) is not part of the trust market, and that the trust market is north of here.  My phones have Lansing numbers (517 area code), so that's not the problem.  The problem is the Alma number that Verizon arbitrarily assigned my MiFi last month.  The MiFi has a number that is in the trust market, even though I do not live in the trust market, nor is my account in the trust market.
    The Verizon CSR directed me to the map of the trust markets on AT&T's website.  This map clearly shows that the trust markets are defined county-by-county.  Gratiot county is part of the trust market.  Clinton county is not.  For some reason (probably that dang MiFi card), Verizon thinks I live in Gratiot county.  I do not....I live in Clinton county.
    Furthermore, the local sales rep tells me that I should have never been assigned an Alma number for a device in St. Johns, and he even gave me the prefixes that the MiFi card should have been assigned.  Neither of the St. Johns prefixes was assigned to the card.  Instead, I got an Alma prefix, which is causing all of this confusion.
    So basically, this was Verizon's geographical error.  They have put my account in the wrong county, and they need to put it back in the right county.  I explained this to the CSR three times.  Now I'm waiting for a supervisor to call me back.
    Man, this is frustrating!

    It looks as if I may be on the way to a resolution  Verizon admitted that they gave me an out-of-area number for the MiFi (probably because I ordered online and the number was issued at random), that it was their mistake, and that they are working to correct the situation so that I won't be switched to AT&T (although they couldn't make any promises, but it's a good sign).  Hopefully, they can straighten this thing out.

  • Where can i get some magic trackpad feet?

    where can i get some magic trackpad feet?

    Contact these people.
    iFixit: The free repair manual
    But most DIY stores will have something you can utilise.

  • I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

    I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

    Dictation is not available on the iPad 2 (your profile says iPad 2)

  • HT1414 when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

    when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

    Try using DFU/Recovery mode to restore
    1. Plug iPhone 4 to computer
    2. open iTunes
    3. Turn off iPhone
    4. Press home and power button for 10 seconds
    5. Stop pressing the power. Button but keep pressing down the home button
    iTunes should say the following; "iTunes won't be able to use your iPhone until you restore your device"
    Then you'll have the option to restore and it should work, it has worked for me in the past

  • TS1702 I can not get some apps to rotate to the landscape position. Help please !

    I can not get some apps to rotate to the landscape or horizonal position. Help !

    Not all apps support landscape positioning. If you'll post the name of the apps you are having problems with, someone can probably tell you if that is indeed the case in your situation.
    Regards.

Maybe you are looking for

  • Fix? Clicking on iTunes makes hidden application appear (usually Adobe Bridge)

    Here's what happens: iTunes is playing in the background while I'm working in some application... say, Photoshop.  To keep things tidied up, I have other open applications hidden.  But if I click on iTunes in the dock to give it focus, or click on th

  • I don't want to download itunes 7.2 but I can't buy music!

    Everytime I go to buy a song it takes me to a page that says I should download iTunes 7.2 for free and install iTunes Plus but I don't want to! Can I not download any song without having downloaded iTunes 7.2 or something? I have dial-up, so download

  • Center image in a display

    Hi, In my project, I have to display 2D images in a display indicator. I change with succes the zoom factor, so one dimension of the image (the largest) fit with the display. For the other dimension (the smallest) I would like to place the image at t

  • FRM-40655

    I get the message frm-40655: SQL error forced rollback. What can I do to resolve this problem? And also I got the message ora-01000:maximum open cursors exceeded. How can I adjust the open cursors limit?

  • Third-Party SNMP Traps on SMC

    Is it possible to receive SNMP Traps from Third-Party applications on SMC(Sun Management Center) If possible, how can this be configured on SMC and how can I import the Third-Party SNMP MIB. Thanks Regards, Rauf Ghafur