Can I get the audio wave form to show in the Timeline?
Can I get the audio wave form to show in the Timeline?
Thanks / Christer
Yes Christer.
At the bottom left corner , under the audio timelines you will see a tiny black triangle.
Click it and from the contextual menu that appears select "Show Audio Waveforms".
Ian.
Similar Messages
-
Audio wave form not showing up properly in Viewer (FCP 7 running Lion)
For some reason when I bring in my audio timeline into the Viewer to see the wave form it does not show up accurately. I used to be able to pull it up and fairly easily see each location we hit the clapper. Now the clapper spike does not show up until I zoom almost all the way in on the wave form. That's a TOTAL PAIN since you only see a few frames at a time. Not good when you've got a couple of hours of audio on that time line with 30 or 40 clapper locations to find. It's funny, it shows an actual flat spot until you ZOOM WAY IN on it, then you see the spike. This seemed to start happening shortly after installing Lion. I am not for sure that's what is happening, but has just never happened before.
Have you trashed your preferences?
If you use Preference Manager (free) from Digital Rebellion, you can save you current preferences before trashing so you can restore them if you wish.
http://www.digitalrebellion.com/prefman/
MtD -
View audio wave form in A1 and A2 etc in the timeline instead of the Viewer
It's likely this is an amateur question buuut -
Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.SEQUENCE--> SHOW AUDIO WAVEFORMS
-
How can I get the value of "Warehose" column in a form
How can I get the value of "Warehouse" column in the form below (I mean what table that contain this value):
Production Supervisor >> Batches >> (Button) Material Details >> (Button) Line Allocations
Well, for more clearly! My problem is I must have the Unit Cost of Items, so I've got it in the cm_cmpt_dtl (table), but if I want to, I must create a relation that require 2 filed, they're Item_ID and Whse_Code.
There's no problem with Item_ID, but Whse_Code seem to be the Mission Impossible (hix, I hate that film!!!!)
I wonder if It was right to post this topic here. But anyway I just post my question here, hope I could get some help.wow, many, many, many.... and many thanks!
Just add a tiny modify to check out the Batch_type
doc_id = (select batch_id from gme_batch_header where batch_no='&batch_number' and batch_type = 0)
Because the batch_no can be duplicated as we also create Batch and Filrm Planned Order.
Many thanks for your support!
P/S: Sorry for my terrible English :P -
How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy
I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
Thank you for any help you can provide.http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there. -
I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?
FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al -
I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.
dont know what to do
-
I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...
also had a friend place inD and Ai on my old laptop and am curious to know how to get it to my new oneAs long as you have your serial number, you may download and install
OLDER previous versions http://www.adobe.com/downloads/other-downloads.html -
Can't get my audio clip to work in Keynote except in edit mode. I've followed Help instructions to the letter. Any suggestions?
Hi Gary - thanks so much for your help. I'd already done that, but finally stumbled across the answer for my situation. I'm new to iMac and this is the first time I used Keynote, so maybe this info will help someone else along the way - I still haven't found this in any of the Keynote documentation or forums I've read.
My slides were all set up with at least one text box in which the text was animated. The sound was the last thing I added to each slide, exactly following the info in Keynote Help re: adding audio. The audio would work when I tested it in Inspector mode, and also if I switched to soundtrack instead. But not if sound was added to each individual slide. Hmmm. After I submitted the question above, I was running through the (auto) slide show one final time to check text, animation, etc. when I noticed that on just one single slide the sound effect came through, but at the very tail end of the slide. Hmm again. Why?
Through trial & error, the answer was in the animation section - not very intuitive re: audio. The steps to correct the issue were: 1) click on the sound icon embedded in each slide, 2) click on the animation tab in Inspector. 3) There's a drop-down menu there that allows you to reposition the audio clip to the #1 spot (if it was added after other "animation"). This allows the sound to begin before the text animation begins on each slide. Before doing this, I guess the sound was in there but the slides were transitioning before it had a chance to play.
Since this is the first time I've used Keynote and it's the most recent version, I'm not sure if this is a new feature to allow users to choose where within a slide to play a sound effect, but I'm guessing that might be why was unable to find any info on how to solve it. Hopefully this will help others who get stumped.
Thanks again for jumping in to help! I really appreciate it. -
How can i get the code html and css of my form please help me
how can i get the code html and css of my form
HI,
If you like to embed the HTML form in your web page then you will need to obtain the form code from the Distribite/Embed tab. Additional information can be found here: http://forums.adobe.com/docs/DOC-1991
You will not be able to access/modify the css code or the rest of the form html code. If you like to view the source of of a HTML page, please use your browser 'view source code' functionality.
I hope this answer your question,
Thanks,
Lucia -
I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestionsSorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch. -
Since updating Firefox, several times a day browsing will 'stall'. I have to close the browser and wait several minutes before I can restart it. Can I get the former version back? Please.
Fx 3.6.19
http://www.mozilla.com/en-US/firefox/all-older.html
As a matter of interest what is this in your User Agent String? -
GACID=dfc_1689; LTID=1689) -
I have an iPhone 4 and I can only get the audio in AirPlay/mirroring but no video! Please help!
ktrow,
We are going to get you up and running with all picture text messages. Have you ever been able to receive picture messages in a group text before? Can ou please check some settings for me. Let's go into Settings, Messages, and is MMS Messaging swich green? How about the Group Messaging switch? If they are green, go ahead and switch those off for a few seconds and then turn them back on. Then re-try the picture message. One last thing, you can also try to reset the network settings. Settings, General, Reset, Reset Network Settings. Please keep us posted.
KevinR_VZW
Please follow us on Twitter @VZWSupport -
I have downloaded an audio talk from Audio Audible, and have authorised my computer to for my Audible Account, yet I still can't get the computer to play the download.
The apps I currently have are for the i phone and i pad but i would like to see this on this computer
On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
Then select Apps from the menu on the right.
If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
See if that makes a difference... -
EBS field how can we get the information that on which form this filed is
we are doing some data mapping activity for datawarehousing if we are given some EBS field how can we get the information that on which form this filed is located is there any good method
Hi Kapoor,
please give also others a chance, and excuse that I get up late on vacation ;-)
Anyway, I'd keep the story creation responder to recognize the copy, then combine it with an observer on the backing xml story to catch the associated XML element which is created there. Something like below:
UIDRef xmlStoryRef = Utils<IXMLUtils>()->GetBackingStore(doc);
InterfacePtr<ISubject> subject ( xmlStoryRef,IID_ISUBJECT );
subject->AttachObserver(observer,IID_IIDXMLELEMENT,observer->GetAttachIID());
Maybe you are looking for
-
Cannot file share with PC Win 7 after Lion install
Prior to Lion install in my brand new MacBook Pro, I cannot share files with my PC running Win 7. I am connecting wirelessly and had no issues sharing files priior to the install. If anyone can help, please send me the steps to get my file sharing wo
-
What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user. I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office
-
IPhone 4 Video length around 40 mins, any way to make it longer?
Hello, I'm trying to do a four hour take on my iPhone 4/32. It gets to about 30/40 minutes and then stops. Any way to change this? Thanks.
-
Hello to all. My first post. My first new G5 Imac packed the display in the first half hour of use. ....now for the second G5 Imac. Have burnt movie onto TDK -RW disc. Put it back into computer and DVD player will not play it . Disc appears on deskto
-
Iphoto won't open with out upgrade
iphoto won't open without upgrade. How do I upgrade