Can I get What'sapp on my ipad3.

Can anyone tell me how to install Whatsapp on my ipad3.

WhatsApp isn't compatible with the iPad.
http://www.whatsapp.com

Similar Messages

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

I have the converter to change pdf to word. Works sometime, other time says conversion is taking too long. Can I get what it has translated so I can use the parts?

I have the converter to change pdf to word. Works sometime, other time says conversion is taking too long. Can I get what it has translated so I can use the parts?

I would ask in the ExportPDF forum, Adobe ExportPDF (read only) (assuming that's the service to which you have subscribed). This is the Reader one.

How can I get what the service pack is installed on my machine from java co

Hi..
Advanced Thanks to everyone, who visit this thread..
In one of my program, I need to find, my Operating System details from java code.. ofcourse I can get OS type and version by System.getProperties().., But especially I need to get what the service pack is installed.. SP1 or SP2.. Can anyone tell me how can I get that info..

Prasad.Kollipara wrote:
Hi boss..
Not to hack the system or not check whether it is hackable or not..
I am developing a tool and before installing it, I need to verify whether it satisfy the requirements or not..
My tool need Minimum Windows Server 2003 OS with SP2..Why would a Java application need that? Sounds like something that should have been done in C#.

How can I get what map versions are installed on m...

Hi,
How can I get the version of the currently installed maps on my phone please?
I have a Garmin nuvi and this give me the proper version by going through Tools -> Setting -> Map -> Map Info. What is the equivalent for the symbian version 5.00.
Thank You.

Try the Garmin forums /Faqs .
jje

Running Total Fields - using formula, but can't get what i want?

Hi All,
I have already searched some forum, but still can't figure out what going wrong. Can anyone help me?, please
I create a view from access named u201CStatementReportu201D and have the following field.
<InvNo>
<CustNameC>
<JobItemNo>
<InvDate>
<JobTypeId>
<JobPrice>
I create three parameter as CustName, StartDate, EndDate, then I create a Group to group <InvNo> as the report detail and a Running Total Fields for calculate the total of <JobPrice>.
So far the report is fine. Showing the grouped <InvNo> and the total amount of <JobPrice>
Then, I want to calculate the <JobPrice> by the condition of <JobTypeId>.
First, I create a new Running Total Fields
Field to summarize = StatemetnReport.JobPrice
Type of summary = sum
Second, I create a formula as following
whileprintingrecords;
global numbervar type1_sum :=0 ;
if {statementRe.JobTypeId} = 1 then
type1_sum := type1_sum + {statementRe.JobPrice};
type1_sum;
After completed the formula, and i press Ok button.
A dialog appear "Warning: Reset/evaluate condition formula contains variables. Do you want to keep it?"
No matter i click Yes or No, I still can't get anything display on the field.
Edited by: manho88 on Mar 9, 2010 9:42 AM

Hi,
Instead of running total use can try this formula.
Place this formula in the details section.
whileprintingrecords;
numbervar jpsum;
if =111 then
jpsum:=jpsum +
else 0;
You can modify this formula as per your requirement.
Hope this helps.

How can I get what is on my MacBookPro's screen to a TV using BoxeeBox?

I want to be able to display what is on my MBP's screen to my TV using the BoxeeBox that I have had for a few years. I have "Streaming from iOS devices" turned on, but when I go to the AirPlay option on my MBP, it doesn't say there are any compatible devices to stream to.
Any ideas? Is there another way to do it without AirPlay or do I need to update something? Is it even possible to do this with the BoxeeBox or do I NEED to buy an Apple TV?

You can use a traditional HDMI cable. There are other options, but they may not accomplish what you want. For example, you can use Vuze to stream media from your mac to certain devices.

HT4528 I accidentially restored my iphone back too far, can i get what I have lost? Pictures, contacts?

I accidentally restored my phone back too far. I lost all current photos, contacts, and important information. Please tell me there is a way to get all of this back.

That would depend if you have a backup that has your current data.
If you're using itunes, you can go to edit-preference-devices - and see if you have any current backups.

If i buy a new ipad. can I get what a bought for the previus one

I bought a new ipad. My previus one is broken. Can I Use the games I bought for my kid in the new one?

Yes. Just either sync the apps from your computer or download them again from the iTunes Store:
http://support.apple.com/kb/ht2519
If you have a recent backup of the old iPad, you can restore the new iPad from that backup and probably get back saved games and other such data.
Regards.

How can I get what I schedule on my phone to go to icloud calendar?

I thought the point of icloud was to be able to make calendar appointments on your phone and have them go to the calendar on your computer? This is not happening. Any advice? thanks.

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

When is gaikai coming to iOS devices cause I'm getting kind of ticked with the same fake lie, gaikai is soon coming to iOS devices crap. What kind of service is this if you can't get what you want when you apparently want it? Apple, do something!

Apple devices always says for gaikai, "gaikai coming soon to iOS devices" but I have had this iPad for 2generations (updates) iOS 6 and 5 yet there is no change to the same excuse. I smell something fishy and I am getting irritated with the same excuse. Just give people the gaikai folks!
It's easy as abc and 123. I do not want to erase my contents and sell this device for this cause. Please give the gaikai for the sake of sim lovers out there!

Contact the Gaikai developers. It isn't apple your mad at

Can't get "What you hear" recording source to wo

I am using a SB Audigy 2 ZS platinum (sb0350p). There is no sound recorded when I try to record from the What you hear source.
I've tried to increase the volume in my advanced settings with no luck. It's if it is muted. I havn't checked any onter line in yet.
Any ideas?

Fireryan,
The setup depends on your input and output sources. In the Creative mixer, unmute (enable) a source such as the microphone or Line-In and slide up the volume. If you're using a microphone, unmute that line and click on the red X and check +20dB boost. Also, click the red X over the "Master Control" and make sure you don't have digital output selected (unless that's what you want.)
BobMessage Edited by Katman on -30-2005 0:34 PM

Can we get the data from list without using any change event...

It is possible to get the current data from list without passing events?...
Thanks in advance,
senthil.

Can you get what you want by accessing the selectedItem/selectedItems and selectedIndex/selectedIndices properties?

Can't get the timer to work

hello,
I'm new to AS 3. However, I'm finding it to be baffling
overall. Every time I try to go deeper with it I find I can't get
what appear to be simple tasks to function.
This time I'm trying to work with the timer class. I have two
layers: display and actions. In the display layer (which is below
the actions layer), I've got a single instance of dynamic text. I
gave it an instance name of dtDisplay.
In the actions layer, I have a keyframe and this code:
import flash.utils.Timer;
function runMany(event:TimerEvent):void {
trace("runMany() called @ " + getTimer() + " ms");
var myTimer:Timer = new Timer(25000,1);
myTimer.addEventListener(TimerEvent.Timer, runMany);
myTimer.start();
dtDisplay.text = 'haha';
What I'm trying to achieve with this code is a 25 second
delay, then the dynamic text being applied to the control.
However, when I run this flash file, I get an error on the
line with myTimer.addEventListener:
"1119: Access of possibly undefined property Timer through a
reference with static type Class."
Now, I think this could be related to my class path. I've set
the class path to have two values:
c:\program files\Adobe\Adobe Flash
CS3\en\Configuration\ActionScript 3.0\Classes
C:\Program Files\Adobe\Adobe Flash CS3\en\First
Run\Classes\mx\utils
The second path has at least the 'utils' part of the import
statement at the top of my frame. However, when i peruse the
utils.as, i see no reference to a timer class.
I have searched my hard drive for AS files that contain the
timer class but don't see it.
Does anyone have any ideas? Thanks.

thanks, gratch.
Mr Rocker, you rock. I appreciate your response. you helped
me get to the point where it runs.
however, it doesn't delay quite like i expect. My code looks
like this:
import flash.utils.Timer;
function runMany(event:Event):void {
trace("runMany() called @ " + getTimer() + " ms");
var myTimer:Timer = new Timer(100000,1);
myTimer.addEventListener(TimerEvent.TIMER, runMany);
myTimer.start();
dtDisplay.text = 'haha';
...and, it doesn't delay 100 seconds before refreshing my
text control. For some reason, it is constantly refreshing it.
Also, i don't see how we're releasing the object from memory
doing this. if we're not, it is useless as timer code that is
reused often.
thanks for the help.

How can I get the keyboard to work when I try to type in passwords or crossword puzzle words?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/951392]]</blockquote>
I suddenly can't get what I type in to show up on the screen. It won't print my user name or password to enter a site or print the answers in the crossword puzzle site I use.

Would you try Firefox beta from the Play Store to see if this helps? What crossword site?

Can I get What'sapp on my ipad3.

Similar Messages

Maybe you are looking for