Can I "globally" insert some time/frames?

I'm working on this demo where it moves along at its own pace
(the user has no control). So I'm trying to make sure each portion
is on screen long enough for the average person to read. (They can
always replay the section later). I have a lot of layers and assets
(say about 20 or so per scene). It's becoming very tedious to add a
second of time here and there. I have to move all kinds of keys
over - especially if I make an adjustment in the middle of the
scene, I have to adjust everything afterward.
I think this would be alleviated if I could just select say
frame 100 and insert X frames "globally" or across all layers. If I
could do that, the stuff to the right would be automatically pushed
over and I wouldn't have to adjust anything, plus I could add the
frames in the middle of a section and not have to touch keyframes.
So far though, I cannot seem to find a way to add frames/time
like this. Is this possible?

you can 'drag' the cursor at a frame position across (down
really ... or up) multiple layers to select them, goto a
non-selected frame, click and drag to see.
Then with a column of frames selected, right-click, and use
'insert frame' to add one frame to all selected layers. just keep
the selection in the same position and repeat.

Similar Messages

The attribute inserted some time in base64 and some time in clearly text

Hi to all,
i have a problem with insert attributes in my ldap.
The attribute are defined in this way:
attributeTypes: ( spadaId-oid NAME 'spadaId' SYNTAX 1.3.6.1.4.1.1466.115.121.1.
15 SINGLE-VALUE X-ORIGIN 'user defined' )
But if i exec many add, the same attribute, are inserted some time encoded in base64, and some time in clearly text.
Can you help me?
I know that my english is far from being perfect, but I hope that you understood the problem
Thanks

Hi to all,
i have a problem with insert attributes in my ldap.
The attribute are defined in this way:
attributeTypes: ( spadaId-oid NAME 'spadaId' SYNTAX
1.3.6.1.4.1.1466.115.121.1.
15 SINGLE-VALUE X-ORIGIN 'user defined' )
But if i exec many add, the same attribute, are
inserted some time encoded in base64, and some time
in clearly text.
Can you help me?
I know that my english is far from being perfect, but
I hope that you understood the problem
ThanksIf you are viewing the attribute value in LDIF format then values which are in non-ascii format ("SAFE-UTF8-CHAR", as per the RFC) will be in base64 encoded (refer RFC 2849 )
-------- RFC 2849 Note-------
4) Any dn or rdn that contains characters other than those
defined as "SAFE-UTF8-CHAR", or begins with a character other
than those defined as "SAFE-INIT-UTF8-CHAR", above, MUST be
base-64 encoded. Other values MAY be base-64 encoded. Any
value that contains characters other than those defined as
"SAFE-CHAR", or begins with a character other than those
defined as "SAFE-INIT-CHAR", above, MUST be base-64 encoded.
Other values MAY be base-64 encoded.
8) Values or distinguished names that end with SPACE SHOULD be
base-64 encoded.
Regards
Randip Malakar

Migrating to new server - Can anyone save me some time?

Hi all!
I've got a very basic Tiger server setup... only running services are firewall, ftp, mail and web. Web service is supporting 6 virtually hosted domains, and mail service is carrying 1-6 users (eMail accounts) for each of the 6 domains. I'm migrating the web service by manually re-configuring it all on the new machine and moving /library/webserver/documents on a DVD.
Is there a short list of files/directories I can copy over to preserve my mail accounts, users and mail messages? I have a remote user who can't change any settings in her Mail.app, and another user with 4000+ mail messages in his IMAP inbox. One guy has all of his photos and junk sorted into 12 user-created folders within his inbox. Needless to say, I'm in seriously hot water if there is too much disturbance and anything is lost.
Downtime is not an issue - I can stop services for several hours if need be.
Right now my plan is to use mailbfr to backup everything it can, but I don't believe that will move my user account database, will it? I would like to simply clone the HD and drag it to the new server, but the old machine is a G5 and the new one is Intel, so I have my doubts.
Ideas?
Thanks in advance!
-Case

Hi
Launch WorkGroup Manager and select the node you are interested in or the node that has all your users; eg: local NetInfo or /LDAPv3/127.0.0.1. Command+A will select all the users in the node, but make sure you de-select the Server admin or Directory admin accounts (depending on which node you are in) as you dont want to transfer those over. Next click on the Server Menu and select Export and save the user list file to a desired location. Do the same for groups. The process works in reverse on the new server. Bear in mind passwords are not transferred over. You can transfer passwords over but it is not a trivial thing to attempt. There is a technical article available on afp548 that outlines how you can do this if you feel brave enough
Tony

I have a very strange home screen app glitch; can someone please take some time to read this because I am stuck!

I truly thank anyone who reads this and offers any suggestions.
I went to the App Store on my iPod touch 4th generation (6.0.1) and downloaded an app. Then I went back to the home screen to move the app inside a folder. I did this while the app was downloading. I held down the icons and they began to wiggle. As I dragged the app icon over the folder, the screen froze, then went through a bunch of random whatever. Now, suddenly, I have two copies of the same app, one of which is ready to use, and one that has the "Installing" bar full. I can't delete either of them. Is there ANY way to fix this without restoring? Thanks so much for your help.

Yes.a reset does not erase any data. I always do that when my ipad has a problem. Even apple says it before you go to the genius bar.
You never know how a reset and just fix one simple thing.

Insert time/frames shortcut?

Hello,
Is it possible to insert time from where the 'Current Time Indicator' is across all layers?
So it would extends all the layers and move all the keyframe accordingly..
In the adobe flash days pressing F5 would achieve the same effect.
So using this image as an example, pressing F5 would extends the layers/move all the keyframes after the indicator by one frame...
Hope the above makes sense
Many thanks for you help in advance

You're right, though, this is a massive pain. The more complex a project gets, the more you start dreading having to tweak timing in the middle.
The first thing I do when I need to add some time to the middle of a complicated composition is I sit back and have a long hard think about whether there is any way, any way at all, that I can avoid having to add time to the middle of my my complicated composition.
What's so frustrating, though is that 90% of the work is repetitive stuff that would be trivial to implement.
Even a simple tool, that just let you automatically select and drag:
- all layers that start after the playhead
plus
- in layers currently under the playhead, all keyframes from here to the end, AND the layer end handle
Drag that combo back and forward to your heart's content. That'd take so much of the pain away. It's a blunt tool - you may well have to either go back and fix things that were actually in motion at the cut, or prepare by putting keyframes round the cut point beforehand. Dragging back may cause some fun keyframe clashes if you're not careful.
But most importantly, it would make it trivial to drag a bit forward, a nudge back to get pacing just right - something that you just cannot do when every nudge currently takes several tediously careful ops to do...
And yes, you'd still have to go and correct any subcomps, but wouldn't that be a quicker job with a tool like this?
I'll stick this in a suggestion box if I can find one, but it seems like one of those things that's so bloody obvious and would make everyone's life so much easier that there's gotta be a reason Adobe haven't done it already. Like Apple taking half an eon to admit that ALL windows ought to be resizeable from their edges. Grrr
Sorry for the rant. One of those days.

How can I execute a command every 10 seconds in a specific time-frame

Hello,
I would like to create a script which in a specific time-frame collects some outputs and also pings every 10 seconds.
To collect the outputs every minute from 22:00PM to 22:10PM I have the following:
event manager applet snmp_output
event timer cron cron-entry "0-10/1 22 * * *" maxrun 30
action 010 cli command "enable"
action 020 cli command "show clock"
action 030 cli command "terminal exec prompt timestamp"
action 040 cli command "show snmp stats oid | append bootdisk:show_snmp_stats_oid.txt "
action 045 wait 5
action 050 cli command "show snmp pending | append bootdisk:show_snmp_pending.txt "
action 055 wait 5
action 060 cli command "show snmp sessions | append bootdisk:show_snmp_sessions.txt "
acionn 065 wait 5
action 070 cli command "end"
To confirm connectivity to the device doing the SNMP polls I would like to execute a ping every 10 seconds in the same timeframe.
Cron seems only to support minutes. Is it possible to combine a watchdog timer + a cron timer?
Can this ping function be incorporated in the SNMP output applet or will I have to write a new one?
Will I need TCL here (I have no experience in TCL)?
Best regards,
Tim

If you wanted the pings to run in parallel, you could have this applet configure another applet to do the pinging, then remove it on the last run. This will require an amount of programmatic logic, though. If you wanted to keep things a bit simpler, add another applet that runs at 22:00 that configures a watchdog pinging applet, then a third applet that runs at 22:10 that removes the pinging applet.
When it comes to embedded quotes when you configure your nested pinging applet, you'll need to use $q to stand for the embedded quotes. You'll also need to configure:
event manager environment q "

Can I run a Unix shell when insert some record on a specific table?

Can I run a Unix shell when insert some record on a specific table?
I need to run a Unix shell when a record be insert on a table. Is there a way in order to do that?
THanks,
Carlos.

1. Make a backup of the extproc.c file in the c:\orant\rdbms80\extproc
directory.
2. Create a file called extern.c in the c:\orant\rdbms80\extproc directory.
The "extern.c" file :
#include <oci.h>
#define NullValue -1
#include<stdio.h>
#include<string.h>
long __declspec(dllexport) OutputString(context ,
                         path , path_ind ,
                         message , message_ind,
                         filemode , filemode_ind ,
                         len , len_ind )
char *path;
char *message;
char *filemode;
int len;
OCIExtProcContext *context;
short path_ind;
short message_ind;
short filemode_ind;
short len_ind;
FILE *file_handle;
int i ;
char str[3];
int value;
/* Check whether any parameter passing is null */
if (path_ind == OCI_IND_NULL || message_ind == OCI_IND_NULL ||
filemode_ind == OCI_IND_NULL || len_ind == OCI_IND_NULL ) {
text initial_msg = (text )"One of the Parameters Has a Null Value!!! ";
text *error_msg;
/* Allocate space for the error message text, and set it up.
We do not have to free this memory - PL/SQL will do that automatically. */
error_msg = OCIExtProcAllocCallMemory(context,
strlen(path) + strlen(initial_msg) + 1);
strcpy((char *)error_msg, (char *)initial_msg);
/*strcat((char *)error_msg, path); */
OCIExtProcRaiseExcpWithMsg(context, 20001, error_msg, 0);
/* OCIExtProcRaiseExcp(context, 6502); */
return 0;
/* Open the file for writing. */
file_handle = fopen(path, filemode);
/* Check for success. If not, raise an error. */
if (!file_handle) {
text initial_msg = (text )"Cannot Create file ";
text *error_msg ;
/* Allocate space for the error message text, and set it up.
We do not have to free this memory - PL/SQL will do that automatically. */
error_msg = OCIExtProcAllocCallMemory(context,
strlen(path) + strlen(initial_msg) + 1);
strcpy((char *)error_msg, (char *)initial_msg);
strcat((char *)error_msg, path);
OCIExtProcRaiseExcpWithMsg(context, 20001, error_msg, 0);
return 0;
i = 0;
while (i < len)
/* Read the hexadecimal value(1). */
str[0] = message;
     i++;
/* Read the hexadecimal value(2). */
str[1] = message[i];
/* Convert the first byte to the binary value. */
if (str[0] > 64 && str[0] < 71)
str[0] = str[0] - 55;
else
str[0] = str[0] - 48;
/* Convert the second byte to the binary value. */
if (str[1] > 64 && str[1] < 71)
str[1] = str[1] - 55;
else
str[1] = str[1] - 48;
/* Convert the hex value to binary (first & second byte). */
value = str[0] * 16 + str[1];
/* Write the binary data to the binary file. */
fprintf(file_handle,"%c",value);
          i++;
/* Output the string followed by a newline. */
/* fwrite(message,len,1,file_handle); */
/* Close the file. */
fclose(file_handle);
3. Use the make.bat available in the c:\orant\rdbms80\extproc directory. You
need to run vcvars32.bat file before running this batch file. This will
create a dll file.
4. Configure the tnsnames.ora and the listener.ora files.
The tnsnames.ora should contain the following entries.
extproc_connection_data.world =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = ORCL)
(CONNECT_DATA = (SID = extproc)
The listener.ora should contain the following entries.
# P:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:p:\orant\net80\admin\listener.ora
# Generated by Oracle Net8 Assistant
LISTENER8 =
(ADDRESS = (PROTOCOL = TCP)(HOST = winnt_nsc)(PORT = 1521))
SID_LIST_LISTENER8=
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = winnt_nsc)
(SID_NAME = ORCL)
(SID_DESC =
(SID_NAME = extproc)
(PROGRAM = extproc)
5. Login from sqlplus and issue the following statements.
create library externProcedures as 'C:\orant\RDBMS80\EXTPROC\extern.dll';
Create or replace PROCEDURE OutputString(
p_Path IN VARCHAR2,
p_Message IN VARCHAR2,
p_mode in VARCHAR2,
p_NumLines IN BINARY_INTEGER) AS EXTERNAL
LIBRARY externProcedures
NAME "OutputString"
With context
PARAMETERS (CONTEXT,
p_Path STRING,
p_path INDICATOR,
p_Message STRING,
p_message INDICATOR,
p_mode STRING,
p_mode INDICATOR,
p_NumLines INT,
p_numlines INDICATOR);
This is the pl/sql block used to write the contents of the BLOB into a file.
Set serveroutput on before running it.
SQL> desc lob_tab;
Name Null? Type
C1 NUMBER
C2 BLOB
lob_tab is the table which contains the blob data.
declare
i1 blob;
len number;
my_vr raw(10000);
i2 number;
i3 number := 10000;
begin
-- get the blob locator
SELECT c2 INTO i1 FROM lob_tab WHERE c1 = 2;
-- find the length of the blob column
len := DBMS_LOB.GETLENGTH(i1);
dbms_output.put_line('Length of the Column : ' || to_char(len));
-- Read 10000 bytes at a time
i2 := 1;
if len < 10000 then
-- If the col length is < 10000
DBMS_LOB.READ(i1,len,i2,my_vr);
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'wb',2*len);
-- You have to convert the data to rawtohex format. Directly sending the buffer
-- data will not work
-- That is the reason why we are sending the length as the double the size of the data read
dbms_output.put_line('Read ' || to_char(len) || 'Bytes');
else
-- If the col length is > 10000
DBMS_LOB.READ(i1,i3,i2,my_vr);
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'wb',2*i3);
dbms_output.put_line('Read ' || to_char(i3) || ' Bytes ');
end if;
i2 := i2 + 10000;
while (i2 < len ) loop
-- loop till entire data is fetched
DBMS_LOB.READ(i1,i3,i2,my_vr);
dbms_output.put_line('Read ' || to_char(i3+i2-1) || ' Bytes ');
outputstring('p:\bfiles\ravi.bmp',rawtohex(my_vr),'ab',2*i3);
i2 := i2 + 10000 ;
end loop;
end;

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Insert time/frames within timeline

I'm a new Flash user, currently using Flash 8. I've built an
animation with a number of elements that fade in and out over time.
The client wants the first element to linger a few seconds longer
before it fades, so I figured there would be an easy way to just
insert blank time or frames in an entire project before a selected
frame (as you would in an audio sequencer or even a spreadsheet)
but I can't figure it out.
Is there a procedure for this?
- Bob

In short... select a frame in the tween and hit F5 (insert
frames). Select a range of frames and hit
F5 to insert multiple frames at a time (the number of
selected frames will be inserted upon each F5
key press).
Chris Georgenes - Mudbubble LLC - Animator/Author/Speaker
Adobe Community Expert - p.781.772.1073
www.mudbubble.com - www.keyframer.com -
www.howtocheatinflash.com
Bob Meador wrote:
> I'm a new Flash user, currently using Flash 8. I've
built an animation with a
> number of elements that fade in and out over time. The
client wants the first
> element to linger a few seconds longer before it fades,
so I figured there
> would be an easy way to just insert blank time or frames
in an entire project
> before a selected frame (as you would in an audio
sequencer or even a
> spreadsheet) but I can't figure it out.
>
> Is there a procedure for this?
>
> - Bob
>

Some Times Table is inserting Partial record from a view Why?

The query consists of a simple insert statement where the data is inserted from a view. The issue is that some times only the first retreived record from the select statement are inserted into the table from a view and the rest are ignored when we scheduled in the batch job of EM console. Some times it inserted correctly.
For Ex.
INSERT INTO Table_COLL(COL_A, COL_B, COL_C)
SELECT COL_A, COL_B, COL_C
FROM COLL_VIEW
WHERE DATE=TRUNC(SYSDATE);
COMMIT;
The select statement retreives 200 records and the insert statement works perfectly as expected when executed in SQL* plus.
However the issue happens where only one record is inserted when the same query is scheduled in the batch job of the EM console or a procedure is created for the query and the same is scheduled in the EM console as a batch job and Some times it inserted correctly in EM Console.
Can anyone explain as why this is hapenning? (DB is Oracle 10g& size is 100gb )

I doubt that there is a bug. I suspect the query runs when you schedule it at a point of time where TRUNC(SYSDATE) gives less rows...
You could store the COUNT(*) and execution time before you run the INSERT in a LOG table. Any transaction based on two times (runtime and systime) can lead to unexpected results.
What about something like this:
INSERT INTO Table_COLL(COL_A, COL_B, COL_C)
SELECT COL_A, COL_B, COL_C
FROM COLL_VIEW a
LEFT JOIN Table_COLL B
ON (      a.COL_A = b.COL_A
      AND a.COL_B = b.COL_B
      AND a.COL_C = b.COL_C)
WHERE a.DATE>=TRUNC(SYSDATE)-1
AND b.COL_A IS NULL;
COMMIT;

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

Hello kumarsenthil210317
Check out the article below to start troubleshooting issues with touchscreen response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G.

A copy of Firefox is already open. Only one copy of Firefox can be open at a time. I cannot find the open one. was having some problems. deleted and trying to re-install. I get this message each time

Some web pages did not load correctly. (on Imac). Deleted Firefox and moved Profile to another drive to backup.
Downloaded new Firefox. When I try to install, I keep getting this message-"A copy of Firefox is already open. Only one copy of Firefox can be open at a time."
I went in and searched for all occurrences of Firefox or Mozilla and deleted.
It will still not load.

I cannot get Firefox to run now. I backed up my Profile to another drive. Cannot create a new one as Firefox will not run. It says there is another copy running. However, I have deleted all Firefox and Mozilla files and downloaded new. When I try to run it, I get the message to close Firefox as two cannot run at once.
I did create a new Mac account logon and can run Firefox there, so something in the other account is showing Firefox is running.
I also checked in ACTIVITY MONITOR and in SETUP and there is no Firefox or Mozilla running.
So, where can this bug be hiding????

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Can I "globally" insert some time/frames?

Similar Messages

Maybe you are looking for