Can I have 2.25 GB RAM in a G4 iMac?

Hi,
I was wondering if I could add more memory to my iMac (G4, 1.25Ghz, lamp type). Currently there is one 256kB module (internal) and a 1GB external module. Even though Apple says that the maximum is 1GB, my computer sees the 1.25GB.
The question is: what would happen if I replace the 1GB module by a 2GB one?
thanks.

Hello,
I don't know the answer but some thoughts:
Is there even such a thing as a 2GB module? I've not seen one.
If you need truly need 2GB of RAM then you probably shouldn't still be using a G4-based Mac.
If you try it let us know though.
mrtotes

Similar Messages

Where Can I Find How to Change RAM in a 2005 iMac, 1.8 GHz PPC G5

Hi
Can anyone point me to a bulletin? I can only find instructions for as far back as 2006.
Where Can I Find How to Change RAM in a 2005 iMac, 1.8 GHz PPC G5?
Thanks

Given that there are three different models of 1.8 GHz PPC G5's using PC3200 DDR 400MHz 184 Pin RAM (Size - 17"/20"; Year - 2004/2005; Model No. - A1058, A1076; Model ID - PowerMac8,1, PowerMac8,2; Order No. - M9843LL/A, M9250LL/A, M9249LL/A; EMC No.- 1989, 2008, 2055), you usually need to provide more information.
Info on how to find/gather this information:
https://www.ifixit.com/info/ID-your-Mac
http://www.everymac.com/mac-identification/index-how-to-identify-my-mac.html
The three models:
http://www.everymac.com/systems/apple/imac/specs/imac_g5_1.8_17.html
http://www.everymac.com/systems/apple/imac/specs/imac_g5_1.8_20.html
http://www.everymac.com/systems/apple/imac/specs/imac_g5_1.8_17_als.html
That all being said, here are two guides from iFixit:
https://www.ifixit.com/Guide/iMac+G5+20-Inch+Model+A1076+RAM+Replacement/872
https://www.ifixit.com/Guide/iMac+G5+17-Inch+Model+A1058+RAM+Replacement/965

Can I have 3 GB of RAM in my Intel Core 2 Duo ..or does it have to be even?

I'm on a MacBook Intel Core 2 Duo 2 GHZ. I upgraded one Ram slot to 2GB and kept the other one at 1GB (as per Tekserve's NYC doing). Now I get a very active pinwheel and very very slow startups. I heard that you have to have even (1 and 1 or 2 and 2) SRAM. Could this be what's effecting my computers performance, or is having 3GB just fine. Thanks in advance.

No you would need to take them out to see who the manufacturer is, it's incredibly easy to do though. Just locate your manual and you will see, if you cannot find your manual it is online at Apple's site:
http://support.apple.com/manuals/#imac
The lengthy start up could be caused by several things one thing to try is a SMC and PRAM reset, the instructions for that are:
1. Turn off your iMac and unplug everything from it for 30 seconds.
2. Plug in the power cord, keyboard and mouse only.
3. Press the power button and immediately hold down the Option, Command, P & R keys until you hear the second gong then release the keys. Your machine will start up normally, then check for the issues you are having.
Regards,
Roger

Can I do a ram upgrade on my imac and what kind of firewire do I have?pgrade and firewire

I have an iMac from 2008 or thereabouts. I want to get into video editing and buy FCPX. I have model identifier iMac8.1, with an Intel Core2 Duo 2.66 Ghz, with 2 GB ram, one 1 GB DDR2SDRAM 800 MHz in each bank. Graphics card is ATI Radeon HD 2600 Pro. The FireWireBus is up to 800 Mb/sec.
Questions:
Can I expand to 4 GB of ram, as I’m told I should do for FCPX. Do I have the slots for that?
Is the graphics card sufficient for FCPX?
To get an external hard drive with fast connection for video transfer, do I need one with a Firewire 400 connector cable or Firewire 800? Or do they use the same connectors?
Thanks in advance for all help.

According to this http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.66-20-inch-al uminum-early-2008-penryn-specs.html your iMac can be upgraded to even 6GB RAM.
The 2600Pro is sadly on this list http://support.apple.com/kb/HT4664 of not being OpenCL-compatible which is a requirement for FCP X
FirewireBus up to 800Mb/sec means that you have 1 FireWire800 port (plus 1 Fireswire400 port) on your iMac.
FW800 and FW400 use different connectors but there are FW800-to-FW400 adapters avaiable.
Personally i would go for an external harddisk with a FW800 connector.
Stefan

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
According to Cruicial my mac mini could use:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
Also According to Cruical my iMac uses:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-12800
Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
I want to increase the ram in both computers.
So, can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac? Naturally the ulitmate test will be when I actually install it, but having an expectation of success or failure will allow me to plan on what to spend money on.
Thanks,
Bear

Thanks for the responses. I probably wont even try as my priority is Ram for the mac mini. 2 is not enough. 8 for my imac is okay for now.
Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed. It seems that I am incorrect.
Thanks,
Bear

HT2953 I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes. Can someone suggest a fix, please?

I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes. Can someone suggest a fix, please?

Hello b0nvivant,
Thank you for providing so much information about the iPod issue you are experiencing. I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a macbook pro 13" a1278, can it take a 2x4gb of ram?

I have a macbook pro 13" a1278, can it take a 2x4gb of ram?

I have a late 08 Macbook Uni - 8GB RAM installed and working perfectly - use only brand name RAM like Crucial, Corsair, Kingston (non Value), Mushkin and Patriot (mac series) for better compatibility.

I have an old user name tht is no longer accessible. I access fierfox through a new user name. I have copied the profile from the old user name. Can I have 2 profiles from which to choose when using firefox in the under the new username?

I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
Thank you

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).

Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011). The other slot is not working, I have only one slot that works. It is stated in this link http://support.apple.com/kb/HT1270#link1 , that the maximum memory is 8 GB where every slot slot has 4 Gb. Is there any problem if i install only one 8 Gb ram in the working slot ?

You should be able to do that.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
Understand that there is no guarantee it will work, but based on the above it should work for you.

If my Mini is running 64 bit can I run more than 4Gb RAM?

I hear ALL over the place that the mini can not use more than 4Gb RAM.
Is this a hardware limitaion of the motherboard/Processor?
OR
Is this due to the fact that mini's run at 32 bit?
You can now easily run modern mini's at 64 bit:
http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
So who knows the REAL answer?
Thanks -
skibum

Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

How can I have videos playlist? - 5230

Hi. I have used video converter on my nokia pc suite and saved the music videos on my memory card.
Now, I need to know how to make a playlist and let my phone play videos all alone other that always having to press stop, back, select another song, press play etc.etc always for each and every song. Can that be possible on my nokia?

That's not entirely true
You just have to create a playlist using RealPlayer (I think it's an .RA or something) and load it to your device, then Realplayer can read that playlist.
I haven't done it in a while, but it is possible.
Search for video playlist.
I found this post from r2d2_117
r2d2_1117
r2d2_1117
Registered Member
Posts: 1
1
Re: 5800 can't have a list of videos during playback.
Options
23-Jan-2010 06:35 PM
Hi, i have the same problem.. it´s frustating.. but i fonund a way.. it´s note the best but it might help a little bit.
you have to create a playlist in notepad.
Example:
file:///e:/Videos/Infected Mushroom - Becoming Insane.mp4
file:///e:/Videos/Video2.mp4
file:///e:/Videos/Video3.mp4
etc, etc
file:///e:/videos/ is the route where you put the videos. and then you put the name of the video. then on the next line put the other video.
then rename the notepad as: name.ram
where name is the name of the playlist
RAM is the extension of the playlist.
finally copy the your´re playlist to the memory card on playlist.
Open Real player on you´re phone. and on STREAMING links you will find youre playlist.
You won´t have the use of >> but when the video end it will continue with the next one. it´s like a continuous play.
i hope this help you a little bit.. or the other one is to google "Smartvideo" and this app has all the functions includes, avi, divx and vdix support.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Have 2004 eMac...screen goes black without notice. Getting a reconditioned 2005 eMac. Can I have the HD swapped from old eMac to reconditioned one without problems??? Black screen is called "collapse to black" and occurs 4-5 daily

Have 2004 eMac...screen goes black without notice. Black screen is called "collapse to black" and occurs 4-5 daily. From what I understand, this is due to bad capicators????? Found a reconditioned 2005 eMac on line. Can I have the HD swapped from old eMac to reconditioned eMac without problems???...with regards to software applications. Old eMac is running 10.4.11 and reconditioned on runs 10.5. Suggestions, tips would be greatly appreciated. Thank you.

Might want to make sure both units are not affected. This is the range of serial number from the now-defunct Apple Repair Extention Program for USB 2.0 eMacs:
G8412xxxxxx- G8520xxxxxx
YM412xxxxxx - YM520xxxxxx
VM440xxxxxx - VM516xxxxxx
A "collapse" is more indicative of a video cabling issue, but the bad caps produced such a wide range of problems that it's hard to sort through them.
If the old eMac is a USB 2.0, which a 2004 unit should be, the HD should exchange with the new one. As the last of the eMacs shipped with Tiger, the new computer should have no probelms with a 10.4 boot volume on the old drive. You can upgrade to Leopard one you have hte new disk in place.
NOTE: Takeapart and reassembly on the USB 2.0 must be done "just so" or you can permanently damage the power switch. Instructions for the USB 1.1 takeapart are slightly different , and the power swtich damage is usually caused by people using the older instructions on a newer eMac.
If you are not up to the takepart nor can you find a local computer tech who knows these. consider taking the drive out of the dead computer(won't make much difference if you damage that one as it's dead), buy an external Firewire enclosure, and put the old drive on it and use it to move data to the new computer. Then you can leave the external attached as a backup drive.
Is the new one a 1.42Ghz model? They have been practically trouble-free around here. We have one and it's been rock solid since we bought it as a refurb in Jan 2006. The 1.42G has the advantage of a Core Image-enabled video chipset, the ATI 9600.
And all USB 2.0 eMacs can, with modern memory modules, support up to 2G of RAM.

Can the mac mini i7, 8gigs ram, edit avchd 1920/1080p without having to convert it?

Can the mac mini i7, 8gigs ram, external FW800 drive, edit avchd 1920/1080p without having to convert it?
Can you scrub the TL at 5x speed and not have it stutter?

By default it converts it to ProRes 422, though you can specify other codecs.
Why convert it?
Although FCP X can handle AVCHD natively, AVCHD being a "delivery" codec is not really suitable for editing.
ProRes is designed specifically for ease of editing especially with complex effects and colour correction.
If your editing is going to be fairly basic you can get away with leaving your media as AVCHD.
Note also that an hour of ProRes is around 50GB !

Can anyone help me with upgrading memory in my older iMac? I currently on have 1gb of memory so as you can imagine my machine is quite slow.

Can anyone help me with upgrading memory in my older iMac? I currently only have 1gb of memory so as you can imagine my machine is quite slow. I check in my system profiler and it shows I do have a memory slot open. It is using a DDR2 and I was told that the latest are DDR3 and I need to find out if I can run that on my model number. This info came from a tech guy at best buy.

That is what I needed. You can upgrade to a maximum of 6gb of ram and need the following type:
200-pin PC2-6400 (800MHz) DDR2 SO-DIMM. You can easily find it online, here is an example: http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400

Can I have 2.25 GB RAM in a G4 iMac?

Similar Messages

Maybe you are looking for