Can I have 2 Mac OS X partitions and 1 XP partition? Will Parallels work?
I need XP and of course 10.5.5 that came with my system. (They are both running fine now with Parallels)
I WANT to also install an older version of 10.x so I can run OS 9 and all my old Apps (=games!).
I gave up on emulators.
Anyone else addicted enough to try this?
Thanks
Hi and welcome to Discussions,
I need XP and of course 10.5.5 that came with my system. (They are both running fine now with Parallels)
I WANT to also install an older version of 10.x so I can run OS 9 and all my old Apps (=games!).
Since your MacBook came with OSX 10.5 Leopard you can't install an older OSX version like 10.4 Tiger 10.3 Panther.
These versions simply lack the needed support for your MacBook.
Also OS 9 does not run on Intel-based Macs without an emulator like SheepShaver.
I gave up on emulators.
Anyone else addicted enough to try this?
Thanks
You're welcome anytime.
Stefan
Similar Messages
-
Have just downloaded iSO6 to my ipad and now facetime will not work properly. It will take incoming but will not allow to make a call. Could anyone offer suggestions to the problem please?
Hi Deb,
Deauthorizing all is definitely the way to go. You will just need to authorize your computer again after, as well as your husband's.
Here's some additional information on deauthorizing all:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/ht1420
I hope this helps!
- Ari -
Have a 3rd generation ipod touch and the touch screen will not work.
What should I do? My iPhone sometimes does this and there is a key on the side that I always hit and it makes it work again but my ipod doesn't have that. What to do what to do what to do
Try the standard fixes:
- Reet. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/nw iPod.
If you still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How many OS can you have in Mac Pro 1.1, have 3HDD so 3 OS?
Hi,
Currently have a Mac Pro 1.1, and want windows 64 bit as 32 bit isn't that good, keep running out of ram which slows the machine down! I currently have 2 HDD in this configuration:
Disk 1: 250GB, mac osx 10.7.5
Disk 2: 500GB windows 32 bit partition
500GB mac extra storage partition
I may get another HDD if I can install windows 7 64 bit on it, i just have a few questions.
I have a patched windows 7 64 bit to allow it to install via bootcamp, but had problems before so erased it and installed 32 bit, (had driver issues on 64 bit, and non mac gpu so couldn't see boot screen).
If I install it on a 3rd hard disk, will it show up when I hold down command when i boot up? I want to keep 32 bit in case something goes wrong.
Someone with experience would be awesome!
So I want to install windows 64 bit ultimate on a third hard drive without tampering with the others, i also want to know how to boot to it if it doesn't show up in the mac boot screen!
I have 10GB of ram and would like to fully utilise it, that along with 8 cores would make a powerful machine, which is limited in 32 bit!
Also, any additional guides to install it on a separate disk would be good!
Many thanksIn iTunes playlists and folders are two different things. I assume you are asking about playlists. 100 will not be a problem.
However, it is unnecessary to create a playlist for Now 82. If the tracks are properly tagged, it will show up as an album. -
I have a mac book retina (13-late 2013) and I can´t see the pictures with photoshop cs6 or neither with digital professional of Canon. I use EXTREME PRO SAND DISK and I have other macs older than this and I never have any problem like this.
Could you recond me something to do?
Thank youI have found the solution for myself for the above. I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!
-
I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148 -
I have my Mac with Mountain Lion and my IPad synched and have Pages on both. I have doc in Word on my Mac I want to access on my IPad while I am away travelling. But I can't locate them. Where should I look to find my previously saved Word docs?
Welcome to the Apple Support Communities
It looks like you haven't got them on iCloud. On your Mac, open Pages and drag the Word documents to the iCloud window -
hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you
You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum
-
I have a Mac with Mountain Lion and a MacBook Pro with Maverick. Since I synced the calendar to icloud, I get a "upgrading iCal calendar" that won't go away. How do you fix this?
Try force quitting iCal by pressing Option-Command-Esc, selecting iCal and clicking Force Quit.
-
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.
If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Must be a verified email address. -
Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?
I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?
Hi Scott,
You should be able to. If the projector has a speaker with acceptable sound, that's one option, otherwise powered speakers or a surround system.
What connections does the projector have?
Exactly which MBP do you have? -
Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support -
i have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
Maybe you are looking for
-
So i'm trying to publish my podcast on itunes, but all i get is ''Host Parameter is Null''. The rss feed has been created following itunes instructions, and it has been 100% validated on the feed validator. If you also paste our feed manually it work
-
Using Multiple Ipods with 1 PC
What do I need to do so that my daughter can also maintain a plat list on my PC. I have my play list for my ipod. She would like to have her own play list/ipod set up on my pc as well. Thanks, Tom
-
PNG images not displaying in Safari iPad
Hi all, We have developed a webpage that loads PNG images in a div that can expand / reduce. The issue i cant seem to solve is why the PNG images do not load on Safari iPad. They just display as blue question marks. However not an issue with PC brows
-
Metadata EDISDEF not maintained - Idoc adapter error
hi, In our scenario, SenderParty->XI->R/3, we are using custom idoc to post into R/3. The idoc adapter throws an error, Metadata EDISDEF for port SAPXXX, IDoc type ZKAGXXX and CIM type not maintained, but when i use standard idoc, i don't get this er
-
Need rollover button to stay 'on' when clicked
Hi I have a menu with five items in it. Every menu item is two words, both grey, and is a button. When the button is rolled over the second word goes red. So far, so easy. However, when the button is clicked and sends the timeline to the correct fram