Can I have an Action file install when a ZXP is opened in Extension Manager for CC 2014?

I have an extension that I'm packaging as a .zxp file.  I'm using Adobe Exchange Packager and setting to the proper install location for the files for the extension.
However, my extension requires an action file (.atn) is installed in the user's Actions panel.  Of course, I can include the .atn file in my package and copy it to a folder on the user's computer.... BUT, is there any way I can include that .atn file in the .zxp package and when Extension Manager unpacks the files, it INSTALLS the included .atn file into the user's version of Photoshop?  So, this way the .atn file is already installed in the user's Actions panel after the extension installs through Extension Manager...so the user doesn't have to worry about installing the .atn file as well?
(If there were a folder to place the .atn file into, I could do that, but I do not believe that there are any folders for CC 2014 that hold .atn files in which the panel will read, if at first not installed in the normal way.  I believe this is new for CC, and that the actions are held in a .psp file.)

I am not sure about the .atn file location but it sounds like you want to create a 'hybrid' extension.
You create a .ZXP containing your CS extension and then create an MXI file which includes the .ZXP and .atn file.
You would then wrap this into another .ZXP which will be used as the installer.
Further information can be found at http://www.adobeexchange.com/resources/7

Similar Messages

  • Can we have . inbetween the file name when we use WEB.SHOW_DOCUM

    i am using froms 10 g
    i have 2 buttons .on clicking those buttons i have to open a csv files.
    for that i have used WEB.SHOW_DOCUMENT in button Pressed.
    the name of the csv files is as follows
    1. ICCM_PAK_MLP_IN1CE_15092006_ReceptionSDB.csv
    2. ICCM_PAK_MLP.tar.gz_ReceptionSDB.csv
    the 1 st button will open the first file and the second will open the second .csv file
    On pressing the button 1 it opens the first csv file ICCM_PAK_MLP_IN1CE_15092006_ReceptionSDB.csv
    correctly.
    but the problem is ,On pressing the button 2 is not opening the file whereas it pop ups a window asking do you want to extract the zip file if i say yes it is not doing anything.
    i think the problem is with the csv file name
    ICCM_PAK_MLP.tar.gz_ReceptionSDB.csv
    can we have . inbetween the file name i thk it is considering the .tar which is inbetween the file name as file type
    anyone please advise

    "can we have . inbetween the file name i thk it is considering the .tar which is inbetween the file name as file type"
    I believe you found the answer to your question. Why not try removing the . in the filename? It would be faster than asking.
    :)

  • I have CS4 In design but when I try to open a certain file I get the answer that all plug in´s is not in my program. How can I update my plug ins?

    I have CS4 In design but when I try to open a certain file I get the answer that all plug in´s is not in my program. How can I update my plug ins?

    <moved from Downloading, Installing, Setting Up to InDesign>

  • On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

    On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

    How to open an existing Pages document?
    Click Pages icon in the Dock to launch Pages.
    When Pages is open, click File menu in the  Pages menu bar.
    Select “Open”.
    When the select document  dialog box opens up, highlight/select the document and click “Open”
    at the bottom right corner of the dialog box.
    s
    https://support.apple.com/kb/PH15304?locale=en_US

  • Can you have a DIAdem file embedded in a web app and then when you click the link to the DIAdem file it invokes DIAdem?

    Can you have a DIAdem file embedded in a web app and then when you click the link to the DIAdem file it invokes DIAdem?

    Hello JCN,
    I will keep in touch with the current Applications Engineer who will be assisting you with this issue and update the forum with the status of the problem. I personally think that your best option would be to create a link that opens DIAdem and then runs a script to load the data from a predetermined file (Rather than a link to the file itself).
    Ian M.
    National Instruments

  • Can i have a smaller file size for songs that i put on iphone vs mac

    i have ripped a lot of my cds  to itunes on my MBA. i used the aac high quality setting.
    is there a way that i can upload lower quality/smaller size versions of the songs that i will put on my new iphone ?
    Q2: once i rip cd into itunes (on my MBA)... is there an easy way I can  later decide to save space and re encode them at 128 instead of 256 (for example).
    i notice that you cant just willy nilly copy/delete from the itunes media folder because itunes doesnt seem to 'refresh' with the new files.
    thx!

    1. the ONLY place i see where you can set the sampling rate,etc  is under preferences/general/'when a cd is inserted"....    am i missing something?
    No.
    2. when i want to add an existing mp3 file (from outside the apple realm) , i am using itunes "add to library" and browsing to some mp3 file(s) . it doesnt give me a option to convert it to an m4a format... it seems to just add it to the itunes library without changing the mp3 file ....    do i have any option here?
    You don't need to convert formats and I would not recommend you do so. You will simply lose quality.
    To answer your original question...
    can i have a smaller file size for songs that i put on iphone vs mac
    If you want smaller files on the iPhone, see my post above which converts them when syncing to theiPhone.
    If you really want to convert when adding songs to iTunes...
    iTunes prefs > General - Import settings as you want.
    Hold Option (Mac) or Shift (Windows) and choose  File > Create New Version > Convert AAC (or what your settings are in previous step).
    This will convert and add the file instead of adding the file then converting and having 2 of the same song in iTunes.

  • Can we have triggers that get fired when we Query a table?

    Hi All,
    What could be the pricise answer to the following question?
    1. Can we have triggers that get fired when we Query a table?
    2. What the relation of triggers and delete, truncate statement in one line?
    3. What is data modelling? Why is it necessary?
    4. Which are not mandatory but essential files in Oracle?
    Regards,
    AAK

    1. Can we have triggers that get fired when we Query a table?for INSERT, UPDATE and DELETE statement, yes
    for SELECT statement, no.
    Question 2 is not clear for me.
    Question 3 is very very general ...
    4 >Which are not mandatory but essential files in Oracle?
    all database files (initialization file, control files, datafiles, redo log files) are mandatory. What is not mandatory but considered as a (very) bad practice is
    to have only 1 control file and only 1 redo log group with 1 redo log file.

  • How can i check the license file installed on the server CCM 6.1.4

    Hi;
    i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
    how can i check the license file installed on this server???
    thanks.

    Hi Matthew,
    I think your idea should work just fine, but you will need to work with;
    [email protected]
    To put together the proper license file due to this change called the "License MAC"
    Customer Impact from New Licensing Procedures
    Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
    Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
    •Time zone
    •NTP server 1 (or "none")
    •NIC speed (or "auto")
    •Hostname
    •IP Address (or "dhcp")
    •IP Mask (or "dhcp")
    •Gateway Address (or "dhcp")
    •Primary DNS (or "dhcp")
    •SMTP server (or "none")
    •Certificate Information (Organization, Unit, Location, State, Country)
    This hash of these fields is called the LICENSE MAC
    Note : Once there is a change in any of the parameters that creates the License MAC, it will
    give you 30 day grace period to generate a new license file for the CM based on new license
    MAC.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
    Cheers!
    Rob

  • TS4592 I have an ibooks file that when I make a change to a page in one chapter it throws a bunch more pages in at the end of the chapter from another chapter in the book.  Anybody have any ideas what is going on?

    I have an ibooks file that when I make a change to a page in one chapter it adds additional pages at the end of the chapter from another chapter.  Any ideas what is going on and how I can fix this?

    Text  pages?  from what you say you are getting the auto flow function to add pages either because you have  flowing text or because you  have a lot of blank lines as you would if  you  tap return to  move  blank space around.

  • Can we keep one action file for all jsp files in struts?"

    I have 5-6 Jsp pages and all are inter connected.
    If any one make changes, these changes should be display in the database.
    In this case, I need only one Action class which can hold or manipulate all changes from all jsp pages. I am not sure "Can we keep one action file for all jsp files?"
    If yes, then how can we configure struts-config.xml file.
    If no, then pls suggest me any altenative solution.

    hai
    go for DispatchAction class and then pass as parameters
    refer struts complete reference...
    it will solve ur problems..

  • Can I have the same product installed in my two computers (home and office)?

    Can I have the same product installed in my two computers (home and office)?

    Yes, as long as the two machines both meet the system requirements for whichever software this concerns.

  • Can we have two itunes files

    My wife and I have an Ipod each but share a PC. Can we have separate itunes files with one ipod synchronised to each. Can I duplicate the current file so each of us can delete the music which only one of us likes.
    A blow-by blow explanation please as I am not very familiar with all this.
    Thanks

    Why not just make playlists, then each of you can choose only the playlists you like.

  • I have installed Photoshop elements 2 on my new computer. When I try to open it it asks for more vertual memory. How do it? IThe computer has 16GB ram

    How do I ad more vertual memory?

    Thank you for your reply.
    In a message dated 12/2/2014 3:47:56 P.M. Pacific Standard Time, 
    [email protected] writes:
    I  have installed Photoshop elements 2 on my new computer. When I try to 
    open it it asks for more vertual memory. How do it? IThe computer has  16GB
    ram
    created by Peru Bob (https://forums.adobe.com/people/Peru+Bob)  in 
    Photoshop Elements - View the full  discussion
    (https://forums.adobe.com/message/6980560#6980560)

  • Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor

    Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
    On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.

    Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
    PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
    SMC Reset: http://support.apple.com/kb/HT3964

  • HT5148 I have a mpg file and when i open it in final cut I cannot get the sound only picture

    I have a mpg file and when i open it in final cut I cannot get the sound only picture

    MPEG means a whole bunch of different formats. What are the exact specs of your media? MPEG files often have multiplexed audio. You will probaby have to convert this.

Maybe you are looking for

  • Need help in XML Parsing

    Hello experts, I have to validate a xml against schema.I have used some java code & xerces jar ro solve this problem.It's working fine.But it's showing only first error & it's coming out.I want to list all the errors.Please help me by guiding how to

  • Additional field(company code) in purchase order screen layout

    Hi All experts, I have a requirement to set the company code in Purchase order as display field during PO creation or change. I have checked in IMG under screen layout for purchase order but  there is no company code field available. How can I add th

  • EREC-BSP-How to call a bsp application from another bsp application

    Hi Experts, In E-Rec one of my bsp application zapp_e_ext calling another standard bsp application hrrcf_searchhlp when user click on search help button. i made a zcopy (zhrrcf_serchhlp) of std application hrrcf_searchhlp,and did some changes, now th

  • Site Group based output in WPMA transaction.

    Hi Experts,                    In IS - Retail there is a transaction called WPMA so as to generate Idocs for material, bonus buy, Tax, EAN etc. My current requirememnt is to make sure , when i choose a  material no, then all stores/ plants incorporat

  • Screen no. for HERS Material type

    Hi Friends, I am trying to write a mass uploading program for HERS material type. When I go to Purchasing view of HERS material type "Manufacturing details" subscreen is showing below (like Internal Material no. & Mfr Part no). i.e. it is showing the