Can I have AS 400 Resource

Hi All,
Can I have AS400 Resource in IDM.
As I am not able to see AS400 in Managed Resources of Configure.
Does IDM supports AS400.
Can Any One Help me out for this.
Regards
Gajendra Nagapurkar

AS/400 is an integrated MID Range system which has its own OS and database with higher security levels as we have it for main frames..
OS/400 - operating system
DB2/400 - Data base
Programming languages we use are, RPG, CL, RPG ILE.
Can any one please tell me how can we write a resource adapter for AS/400.
With the above information Avialiable
Regards
Gajendra Nagapurkar

Similar Messages

  • Help I can only have max. 3 osx apps. open at the same time ?

    Help I can only have max. 3 apps. open at the same time ?
    If I have 3 apps. open, and try to open a 4th. this message comes up :
    The application "Mail" cannot be launched. -10810
    Of cause if I'm trying to open up something else than mail, lets say iPhoto, it will say "iPhoto".
    This is very weird to me, and I'm normally pretty good at solving issues myself, but I'm stuck with this one.
    Please help out

    I've had this quite a lot too. Do you find that under these conditions you can't load a disk image either?
    At first I put this down to Rosetta taking up a lot of resources. I was running OmniWeb with a lot of pages open in the workspaces so I've switched back to Safari until OmniWeb is UB. This morning I read that having Windows file sharing switched on helps to cause this problem. I switched this off, rebooted and ran disk utility to repair disk permissions and I've been running OK since then. I've currently got 13 apps open plus Finder and Widgets. They include 2 bigguns, Eclipse/MyEclipse and Visual Paradigm for UML. It'll probably stop working now I've written that.
    I run a MBP 17 with 2GB memory. My guess is that Windows file sharing does cause problems. I just hope Apple has resolved this in 10.4.7... whenever that is.
    Gareth

  • How can I have users change textures in acrobat 3d and Reader question tia sal2

    I'm trying to have users in Acrobat reader change textures of a box which I made in acrobat 3d
    how can I do this?
    Example
    I made three textures for a box and I would like the user to have the ability to change the textures if they choose. How can I do this? Any examples?
    Can I have a user select the textures or the layers from a photoshop file in Acrobat 3d?
    Tia sal2

    Yo ratboy,
    You can do this. In order to map the images, they must be attached as a 3D resource. (There is a free plugin for this; search the forum for "Attach3DResource.api"). Once the images are attached, you can use the 3D Javascript API to map them to the meshes you desire.
    For one doc, I attached 25 images in this manner. I then used the script below to create a bunch of empty meshes, and then apply the images to said meshes.
    Hope this helps!
    //3D javascript ========================================
    //create 25 procedural meshes ======
    var leftEdge = -180;
    var horizontalOffset = leftEdge;
    var verticalOffset = 0;
    var myMesh = new Array();
    var myVector = new Array();
    for ( i=0; i<25; i++ ) { myMesh[i] = scene.createSquareMesh(64, 48, "myMesh" + i); myVector[i] = new Vector3( horizontalOffset, verticalOffset, 0 ); myMesh[i].transform.translateInPlace(myVector[i]); horizontalOffset += 74; if ( horizontalOffset > 180 )
    horizontalOffset = leftEdge;
    verticalOffset += 58;
    //create image array and resource objs ============
    var myImageResources = new Array();
    var myImageFiles = new Array("8d91.jpg",
    "ad2e.jpg",
    "barnpond.jpg",
    "Beach01.jpg",
    "Beach04.jpg",
    "Beach05.jpg",
    "Beach06.jpg",
    "Beach13.jpg",
    "bike trailer.jpg",
    "cobra.jpg",
    "cr80xr200.jpg",
    "craigs_place.jpg",
    "Dandrea.jpg",
    "dirtbike.jpg",
    "e027.jpg",
    "f5b5.jpg",
    "f613.jpg",
    "halfdome.jpg",
    "Iceberg.jpg",
    "island.jpg",
    "kx100_gb.jpg",
    "maui_horanhero.jpg",
    "norcal_ocean.jpg",
    "sierraLake.jpg",
    "Smokey Light.jpg",
    "test.txt");
    //create resource objs
    for ( i=0; i<25; i++ ) { myImageResources[i] = new Resource("pdf://" + myImageFiles[i]); }
    //load images on meshes with handler ============
    var myImageObjs = new Array();
    var myImageMats = new Array();
    myRenderer = new RenderEventHandler();
    myRenderer.onEvent = function(renderEvent)
    for ( i=0; i<25; i++ ) { //create image from resource myImageObjs[i] = new Image(myImageResources[i]); console.println("Image = " + i);
    //add image to model
    myImageMats[i] = myMesh[i].material;
    myImageMats[i].diffuseTexture.setImage(myImageObjs[i]);
    //remove handler
    runtime.removeEventHandler(myRenderer);
    runtime.addEventHandler(myRenderer);
    //cause a recalculation of the scenegraph.
    scene.update();
    console.println("Call scene.update()");
    console.println("Created 25 Square meshes: (64, 48, 'myMeshN')");

  • Can I have more than one library for the same ipod nano?

    I have a desktop pc that I have originally setup my nano on. I have about 400 songs on that computer. I have about 500 other songs on my laptop, can I put itunes on to both computers and have them add the songs from each one respectively without erasing the other? and if so, how?

    Type 61675 into the search bar under the support tab on this website. "How to use ipod with multiple computers"
    Basically, you have to change your preferences to manually manage instead of automatically update.

  • When I import photos taken from my Ipod Touch 4 to My Mac Desktop, I click delete photos on ipod, but they do not delete. Is the only way to delete them individually (I have 1,400 photos!) or is there a way to delete them all in one go?

    When I import photos taken from my Ipod Touch 4 to My Mac Desktop, I click delete photos on ipod, but they do not delete. Is the only way to delete them individually (I have 1,400 photos!) or is there a way to delete them all in one go?
    I realise you can you can delete them on your ipod slowly as you have to click on each one, and you can restore your ipod, but surely there is a way to get around this?
    Software: 4.3.2
    Build Version: 8H7
    Thanks If anyone can help me.

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • How many Management agents can you have running simultaneously on a host?

    Hi all,
    I've scoured the Oracle documentation and not been able to find a definitive answer to this question, how many Oracle management agents can you have on a single managed host target? Can you for example run an 11g agent and a 12c agent simultaneously (whilst migrating to 12c without upgrading the present OEM instance) If so can you run two 12c agents, each pointing to a different OMS? I’ve seen examples of an agent for each database instance on a host managed target, so a host with three Oracle database instances has three Oracle Management agents all pointing to the same OMS with each agent is monitoring just one of the database instances. There must be resource considerations here for memory, cpu and network traffic etc? I’ve always understood it to be one Oracle Management Agent per managed host
    Thanks

    I don't think there's any data on impact or performance since it's not a recommended configuration. If you have host/configuration monitoring enabled on both agents, they will be running the same queries/scripts against the host/inventory, etc. so they will likely have contention at some point. If you monitor the same databases, you will definitely see contention and increased overhead as there will be multiple agents running the same queries. You might also see problems w/ any of the server generated alerts (tablespace, etc) if you change thresholds as the agents send that to the database, and then the database will be out of sync with the other agents.
    What exactly is the goal for having multiple agents? Is it short term or long term?

  • Can I have a pack path in the XmlWriter.Create() method?

    Hi Everyone,
    This piece of code is throwing "The given path's format is not supported" error!
    var settings = new XmlWriterSettings();
    settings.Indent = true;
    var writer = XmlWriter.Create("pack://application:,,,/Languages;component/English.xaml", settings);
    System.Windows.Markup.XamlWriter.Save(rd, writer);
    writer.Close();
    Is there restrictions on the type of path we can provide in Create() ?
    Please Mark as Answered If this answers your question Or
    UnMark as Answered if it did not.
    Happy to Help :)
    My Site

    >>Can I have a pack path in the XmlWriter.Create() method?
    No you can't. Pack URIs are resource identifiers and the XmlWriter.Create method accepts an output file path and this path is relative to the directory of the running executable (.exe), i.e. the method simply creates a file on the disk.
    Whether this file is actually resides in your project folder or not doesn't matter at all as far as the XmlWriter is concerned.
    Please remember to mark helpful posts as answer and/or helpful and please start a new thread if you have a new question.

  • One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.

    I create a brand new plan based on a template.
    A task in that plan has a team resource assigned. the task is fixed work. The PM may change the work and duration but not the team resource.
    The plan is published.
    I delegate my self as a team resource: and try add myself to team task in the timesheet area (using insert row). I can choose some tasks and the add. Most tasks throw this error. This happens if nothing on the plan is changed - it is brand new - minutes
    old
    One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
    How can I stop the alert:
    One or more of the specified resources could not be re-assigned. This can happen if the proposed resource to be assigned has already an assignment on the given task or the specified assignment is deleted or rejected.
    Trying to stop the swap to Salesforce - but the errors keep a coming

    oooch - I can fix it - I need delete the task and recreate it. Which is amazingly tedious as I cannot see if a task needs recreating or not. There's 10 template plans and an average of 200 tasks - then I have to rename the template - the assign the
    new template to the EPT - this will be a long night; with only complaints at the end.
    Trying to stop the swap to Salesforce - but the errors keep a coming

  • What OS can I upgrade my 400 MHz DVD G3 iMac to?

    I have a 400 MHz DVD G3 iMac currently running OS 10.2.8. I have 640 MBs of RAM. What is the most current OS I can upgrade to? Thanks for the help!

    The posting proceedure can be a little confusing if you are not used to the forum.
    In the future if you go to the top of the page and click on > Using your iMac (CRT), for example and post there, more folks will see your question. (Some responders here could move posts in the past - 'not sure if that still applies).
    To install Tiger on your machine you will need 256MB RAM minimum (I'd double that). Be sure you use a "Universal" install disk. Don't try to use a "Machine-Specific grey disk. It won't work.
    Although external drives are useful, you don't need one to install Tiger.
    David

  • Applying Sticky Error in saving to DB: Can't create sticky because resource is not allocated.

    When trying to setup Stick http-cookies and when I deploy i'm getting the following error.
    Error in saving to DB: Can't create sticky because resource is not allocated.

    just a wild shot. you sure have resource class with sticky resources created.

  • Updated my OS to Yosemite ver 10.10.3 Need to access iPhoto library in Photos. I have over 400 Mega pictures on a partitioned external drive. Tried dragging but no change.

    I updated my OS to 10.10.3. but now can't access my iPhoto library in Photo.
    I have an iMac (20 inch, Mid 2007) with a 2 GHz Intel Core 2 Duo, 4 GB 667 MHz DDRs SDRAM and have over 400 mega bits of pictures on a partitioned external drive: 2 TB G-Technology by Hitachi connected by FireWire 800 to my iMac. My iPhoto application no longer reveals what version of iPhoto I have, but it was last updated on Dec 14, 2013 with a 1.7 GB file.
    Tried dragging from its place on external hard drive.
    When I go into the iPhoto it says it is not compatible with OS X Yosemite but the link offered to App Store says they do not have an update.
    Help?

    Apple dropped both iPhoto and Aperture with the Yosemite release, and I am not happy about that as I used Aperture, but try holding down the option key when you click on the Photos icon. That should bring up a box asking what library you want to connect to. In my case it had both Aperture and Photos. But there is also a choice called "other" that I would think would allow you to navigate to where your library is located and select it.

  • For upgrade fastload, can you have CI in Windows and AS in zLINUX

    Hello,
    Based on the DB2 Cookbook, the fastload feature during upgrade is not available in Windows server and only in zLINUX.
    Questions please
    - can you have the CI in Windows and the apps server in zLINUX in the source and target systems?
    - if possible, how can you 'force' the 'export' and 'import' process to run only in the zLINUX apps server?
    Thanks,
    Terry

    Hi Terry,
    let me answer your questions:
    can we have the CI in windows and the apps server in zLINUX to be able to use the fastload feature?
    We see no reason why the R3load based export and import for Unicode Conversion cannot be done on a DI. The R3load based steps belonging to the Upgrade will be done on your CI and without Fast Load.
    Since we'll be using parallel export/impirt, can we have that set-up in both the source and target system?
    Using parallel Export and Import should be fine.
    And how can we put the export and import process to use the zLINUX servers in the export and import?
    You just start the R3load processes on the Linux DI system instead of the CI.
    If you plan to implement zLinux for the reason of the Unicode Migration only (and not for server consolidation for example), you might think of Linux on xSeries as well. You can reuse the same hardware as for Windows appservers and the Export/Import Tasks will not share CPU resources with the Database system.
    Regards, Joerg

  • Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

    Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
    Thanks,
    Sreenivas

    Hi Sreenivas,
    I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore.  Your Discussion will most likely get reported as non-specific and get removed.  If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
    There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed.  There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having.  If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
    Regards, Mike
    SAP Customer Experience Group - CEG (and a Moderator)

  • Music on my iPhone has become very difficult to edit since upgrading to 5.0.1.  If I simply want to delete some songs, it insists on a complete sync cycle after EACH one I delete.  This is so annoying- (I have over 400 Christmas songs I won't need until n

    Music on my iPhone has become very difficult to edit since upgrading to 5.0.1.  If I simply want to delete some songs, it insists on a complete sync cycle after EACH one I delete.  This is so annoying… (I have over 400 Christmas songs I won't need until next year) I have also noticed it randomly keeps updating album artwork…adding more time to each sync.  Is there some way I can turn off the syncing until I have picked and deleted all the songs I want?

    The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
    A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

  • K7N2G 6570: Can it run XP3000+ 400 FSB with External VGA & 400 RAM

    K7N2G 6570: Can it run XP3000+ 400 FSB with External VGA & 400 RAM
    I have a K7N2G 6570. I am running an AGP graphics card. I have 400 FSB ram. Can I run the XP 3000 + with the 400 FSB?
    I read similar posts but none really answer if this is a runnable scenario. They only reference that the official spec is 333 with the built in graphics.
    Help is appreciated!
    Thanks!

    According to this link about the K7N2G, It will suopport a 400fsb cpu by using an external video card.
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=398

Maybe you are looking for