Can I have both facing and non-facing pages in a document?

I am trying to assemble a booklet with 11x17 spreads - some of these will be two facing 8.5x11 pages, but others will be a single 11x17 image, and would be better to treat them as a one page spread. We will be producing a hardcopy and an electronic version. The hastily sketched image below shows what I'm looking for. In the PDF version, the pages would be oriented as shown. In the booklet, the large images would be rotated to fit into the 8.5x11 booklet and viewed centerfold style.
Is this a thing I can accomplish in one InDesign document, or will I need to produce separate versions for the digital & print editions?
Thanks!!

For the print version I would set up as an ordinary 8.5 x 11 facing pages file, and rotate the spread view for the pages that you need to see as 11 x 17 verticals, but you're going to need a second PDF for  the electronic version if you want to export spreads. I'd give exporting as PDF (Interactive) a try -- spreads is the default, and rotate the occasional page in Acrobat before distribution. That will give you spreads for everything, though, so if you want to have individual 8.5 x 11 pages, you'll need to export multiple PDFs, specifying ranges, with spreads selected or deselected, then combine them all into a single PDF in Acrobat for distribution.

Similar Messages

  • Can we have both 9i and 10g db running on the same machine

    Hi,
    I want to to exp/imp upgrade of my 9i db to 10g db.
    Can I have both 10g and 9i installed on the same server?
    Thanks,
    Kavitha

    Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
    Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
    However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
    Hemant K Chitale
    Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

  • Can I have both Lion and Snow Leopard on One Hard Drive?

    My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

    How To Run Snow Leopard On A New Mac
    This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
    What has to be done:
    Create a new partition on the hard drive.
    Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
    Step One: Create a new partition on the hard drive
    To resize the drive and create a new partition do the following:
    1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
           After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    Step Two: Obtain a clone of a Snow Leopard system:
    You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
    Option One:
    Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
    Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
              Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the new partition on the internal drive. Source means the USB flash drive.
    Option Two:
    If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
              Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
    After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
              Restore the clone using Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
              Destination means the new partition on the internal drive. Source means the external drive.
    If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

  • Can I have both IPS and Content security on ASA5510?

    Hi expert
    We want to have a ASA5510 with both IPS function and Content Security feature, while I checked on Cisco website, looks like ASA5510 or 5520 only have one SSM slot, so I can only use either AIP module or CSC module, does it mean I can not get both features at the same time.
    Right now I want to have IPS function and anti-spam, anti-virus, antiphishing, content filtering, URL blocking such feature, so what do I need to buy to have all of these function in one device?
    Thanks

    Dear Echo Chan .
               You can go with CSC module for your requirement , most of your requirement could be satisified by CSC module except IPS functionality
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_qas0900aecd8040397e_ps9774_Products_Q_and_A_Item.html
    The Cisco ASA 5500 Series CSC-SSM is an add-on services module for Cisco ASA 5500 Series appliances. It delivers industry-leading threat protection and content control at the Internet edge, providing comprehensive antivirus, anti-spyware, file blocking, anti-spam, anti-phishing, URL blocking and filtering, and content filtering services.
    HTH
    Thks
    Santhosh Sarav

  • Can you have both Wireless and USB printing configured simultaneously on HP Laser mono 1102w

    Hi Guys / HP,
    Just wondering if you can have the HP Printer mono laser p1102w setup for both USB2 cable hard-wired to notebook and for wireless connections concurrently.
    Trying to install printer with both setups via install CD on my HP notebook Pavilion dv6.
    Because when installing the printer CD it asks for one or the other i.e. USB or Wireless.
    Is there an easy workaround.
    Regards
    Mike
    [Content Removed]
    This question was solved.
    View Solution.

    Hello,
    You should be able to connect both, but not Ethernet and wireless at the same time.

  • Can i have both leopard and snow leopard on the same partition?

    I have a MacBook Pro with 10.5. I want to install 10.6 and keep 10.5 on the same drive. The drive has only one partition. What problems might I encounter.

    Yes you can, you could put the two in separate partitions to be safe.
    Unless,  as Michael noted, you use VM software to run a different OS on the same  partition, impossible is the word you're looking for. Not safe.
    He asked if you can or not. not safety advice. It's a simple yes or no. and yes you can. For all I am concerned, the man is an evil genius building an IT bomb before his final day after an untimely layoff. It's a yes or no question man. Did not ask your opinion on the highly unlikely event that he is able to go through the initial system checks and failsafes, and installation, and then the cosmic chance of success.  If you notice, the only thing I stressed was to get your backups. After that, go nuts.  It's how you learn.
    Trigger a dependency issue that the OS tries to correct and it snowballs into a mess.
    Is that supposed to mean something? Anything?
    Are you by chance one of the apple-sticker-prius jockeys who deliberately close the door on me in the far left lane because you feel that every situation has a moral right and a wrong, and you're left to opine?  Except what's happening is I'm on my Yamaha and a you're technically attempting murder? I"m used to this guy.
             ALright say your mac OS =64 bit, but the hardware inside is 64 and 32. Off the top of my head- the Intel GMA chipsets are still running 32 bit drivers regardless of OS. Install 64bit on that machine and I think you're going to have issues with faulty driver dependencies where GMA spots a newer driver on the old 32bit partition vs. install disc. Youcan't fix this. By the time you start seeing errors, the OS has already tried fixing the dependencies by following down the 32 bit trail and dumping its own core. Try it if you don't believe me.
    you want to fill the disk with zeros.
    kadaggett (or anyone for that matter), do not follow this advice. It won't make a spit of difference how fast your  Mac will operate. The only purposes for a zero erase is to either try to  map out bad blocks that have developed (in which case, you should  replace the drive), or you're making it much more difficult for anyone  to recover deleted data.
              Right off the bat I think you should stay away from SSDs or perhaps run them in IDE mode to be safe. Or you'd bereplacing them every other day.  WHat I"ll be doing is allocating 10% to cache, playing with the trim, keeping it <50% full, and using 60GB cache to run my OS. You do what you like.  Send me your old HDD's though. Ever try formatting an SSD? And then it actually boots as if you hadn't formatted? Hey you thinkinn maybe sentient Macs experience phantom limb syndrome?
    I find and fix bad blocks and realize 90% of them weren't bad. I don't know maybe the ghosts are back. But maybe it was static shock that temporarily crippled a few blocks. Can't know until touch it with a 0. And there is nothing wrong with 0s.  This is not 1987 and you are not going to hurt your What?  Don't order people to follow this or that advice - are you like the hall monitor around here?  WHy do you tell people what follow? Why do you assume they are here to follow? Do you feel like you just led people to the right path? You feelin good? Because I think we both look like ********.

  • Can I have both Nano and Shuffle on one computer/same user account?

    I have a Nano that I use daily and also just purchased a Shuffle to take to the gym (I'm a bit paranoid about the Nano getting broken, lost or stolen). I'd like to have some of the same music on both devices. Can I do that? (I've yet to plug in my Shuffle in case one overrides the other.)

    Hi MNRobin,
    Yes you can! I suggest reading Knowledge Base Document #200432. If you want, you can select which songs go on which iPod by Manually adding songs, playlists, podcasts and audiobooks.
    I hope that helps,
    Jon

  • Can I have both local and iCloud notes in Mountain Lion?

    I always had both local (device specific) and iCold notes on my iPhnone I hope this is really the way Apple meant it to work and they will not "fix" the behavior in future releases, as it is very useful.
    On the Mac however, I had the surprise tho see that there is no such thing. I tried the same thing I tried on the iPhone.
    1. Turn iCould Notes off, delete all notes.
    2. Create a new note.
    3. Turn the iCloud notes on.
    After doing this you will have to kind of notes, "on my iphone" and "icloud". 
    However, I cannot do this on my Mac. After step 3, the notes are merged and the local not becomes a iCloud note. 
    Thanks in advance

    Sometimes it takes me a while to remember this stuff. The issue is that these invisible folders are actually symlinks and not real folders. They behave differently. Here's something that used to work and may still:
    Open Terminal in the Utilities folder:
    cd /
    nano .hidden
    Press RETURN after each line. In the editor listing enter, one line each, home and net. CTRL+O to save the file. Now log out and log back in or restart. The files should be invisible.
    Beyond this requires downloading the XTools in order to use one developer tool not included with OS X.

  • Can I have both V6 and V5 loaded at the same time?

    I am going to keep V6 but would like to reload V5.
    Is this possible running both versions? When updates for V6 are available I would like to give them a try. But for the time being almost all of my iMovie videos have Gee Slick transitions. Many crash V6 or just turn black and will not render. If it is possible to run both versions I would like to know if there are any pit falls I should look out for.
    PowerPC G4 Dual1.42 GHz   Mac OS X (10.4.4)   2 GB DDR SDRAM

    Yes, there are several posts here about how to do this. Very quickly . .
    If you have already install v6, you will have to remove it.
    Then, install v5 and rename the app, so v6 will not write over it.
    Now reinstall v6.
    Check other posts for how to uninstall.
    Clay

  • I installed Office:mac 2011 on my new iMac running 10.8.3 and discovoed my file transfer from my old macbook installed Office:mac 2088. Now I have both installed and none of the office apps work - I keep getting the same error message

    I recently purchased an iMac to replace my 2008 macbook.
    I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
    However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
    I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
    Can anyone help (I am not a really sohpisticated user so be gentle)
    Thanks Dave

    Hello Dave,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • How can I have both date and time for a Date type variable?

    If I have a Date type variable: Date today=new Date(), Is it possible to also give the current time to "today" but still keep the type as Date?
    I mean , for exmaple I want to store this "today" to database as Date type, and the value in database is "2007-05-05 13:30:13". I do not want to use SimpleDateFormat to do that, because I want to use Date type not String. Is that possible? how to implement this?

    I'd say he means you should use Timestamp to store
    the time value, because that's what it's there for.
    Because java.sql.Date is defined not to store a
    time value.Correct. The OP should read the Javadoc for java.sql.Timestamp.

  • Both excisable and non-excisable items are in a same location (Warehouse)

    What will be best solution for the client (of SAP B1 2007 B PL7), those who have both excisable and non-excisable items are in a same location (Warehouse)...??...Is there any need to create two warehouses?... but how will be the excisable setting???

    Hii Das
    The best solution would be only to create two diffrent ware house for excisable and non excisable
    , to avoid unneccesary confusions, and to stay away from un avoidable errors
    Thanks
    Rizz

  • I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

    I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15  years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

    Hi bookchic
    Thanks for your feedback.
    Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
    For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
    If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
    Kind regards
    Bev

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How can I have both genius playlist and regular playlist on my new 160g ipod classic. The list of songs are there, but when I click playlist, I only get the genius playlists.

    How can I have both genius playlists and regular playlists available on my new 160g classic ipod. I can see my entire song list, but no playlist other than the 3 genius playlist I just made.  Also how can I delete a genius playlist. Made the same playlist twice by mistake. Thanks.

    This was not a simple task.  Got it handled.  Had to call Apple support. Apparently, the 160g only syncs the genius playlist.  You have to go in and "tell it" to sync the entire playlist as well as the genius playlists. There is also an option for only syscing certain songs. On itunes, there is two sections; one for the stuff that is synced on your ipod and another separate list for the stuff in your library!  This is exciting for me as I am not computer savvy to say the least. 

Maybe you are looking for

  • Netweaver not installed properly

    Hi Everyone, I have installed Netweaver ABAP trial version part1,after installing I have not got any exe file .The following folders I got: 1. Doc 2. Image 3.Autorun                                   SETUP FILE 4.Copy_TM                              

  • Server side rule filtering and message colorization

    I've been using server side rule filtering (Sieve) to handle all my mail filtering, mainly because I don't have a .Mac account and I have multiple machines that I access my mail from. This setup works really well except I have not been able to figure

  • Need sample programs for inbound & outbound interfaces in abap hr?

    hi friends i need sample programs for inbound & outbound interface programs in hr abap . any one send me pls thanks & regards deepurd

  • Reconstruct library from Ipod

    I lost everything in my HD. Already I fixed the problems and I reinstalled the ITunes. How I make to reconstruct mine library from the Ipod?

  • O8 on SuSE / Installation

    Is there anyone who managed to get the installation done on SuSE Linux? I tried everything that was posted in this forum and still didn't get it to install correctly. I am using SuSE 5.3 with the rpm glibc upgrade from SuSE.com. null