Can I have both V6 and V5 loaded at the same time?

I am going to keep V6 but would like to reload V5.
Is this possible running both versions? When updates for V6 are available I would like to give them a try. But for the time being almost all of my iMovie videos have Gee Slick transitions. Many crash V6 or just turn black and will not render. If it is possible to run both versions I would like to know if there are any pit falls I should look out for.
PowerPC G4 Dual1.42 GHz   Mac OS X (10.4.4)   2 GB DDR SDRAM

Yes, there are several posts here about how to do this. Very quickly . .
If you have already install v6, you will have to remove it.
Then, install v5 and rename the app, so v6 will not write over it.
Now reinstall v6.
Check other posts for how to uninstall.
Clay

Similar Messages

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • Can you sync both iCloud and Google Calender at the same time?

    Hi all,
    I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
    Is it possible to sync both to my iPad/iPhone at the same time?
    I am yet to find a way to do this.
    Thanks

    tkoe wrote:
    Hi all,
    I am an iCloud/MobileMe user, but have a Google Calender at work with other colleagues.
    Is it possible to sync both to my iPad/iPhone at the same time?
    I am yet to find a way to do this.
    Thanks
    You can subscribe to both calendars on your iPhone/Pad etc, you can also subscribe to them on your Mac

  • Can i have both leopard and snow leopard on the same partition?

    I have a MacBook Pro with 10.5. I want to install 10.6 and keep 10.5 on the same drive. The drive has only one partition. What problems might I encounter.

    Yes you can, you could put the two in separate partitions to be safe.
    Unless,  as Michael noted, you use VM software to run a different OS on the same  partition, impossible is the word you're looking for. Not safe.
    He asked if you can or not. not safety advice. It's a simple yes or no. and yes you can. For all I am concerned, the man is an evil genius building an IT bomb before his final day after an untimely layoff. It's a yes or no question man. Did not ask your opinion on the highly unlikely event that he is able to go through the initial system checks and failsafes, and installation, and then the cosmic chance of success.  If you notice, the only thing I stressed was to get your backups. After that, go nuts.  It's how you learn.
    Trigger a dependency issue that the OS tries to correct and it snowballs into a mess.
    Is that supposed to mean something? Anything?
    Are you by chance one of the apple-sticker-prius jockeys who deliberately close the door on me in the far left lane because you feel that every situation has a moral right and a wrong, and you're left to opine?  Except what's happening is I'm on my Yamaha and a you're technically attempting murder? I"m used to this guy.
             ALright say your mac OS =64 bit, but the hardware inside is 64 and 32. Off the top of my head- the Intel GMA chipsets are still running 32 bit drivers regardless of OS. Install 64bit on that machine and I think you're going to have issues with faulty driver dependencies where GMA spots a newer driver on the old 32bit partition vs. install disc. Youcan't fix this. By the time you start seeing errors, the OS has already tried fixing the dependencies by following down the 32 bit trail and dumping its own core. Try it if you don't believe me.
    you want to fill the disk with zeros.
    kadaggett (or anyone for that matter), do not follow this advice. It won't make a spit of difference how fast your  Mac will operate. The only purposes for a zero erase is to either try to  map out bad blocks that have developed (in which case, you should  replace the drive), or you're making it much more difficult for anyone  to recover deleted data.
              Right off the bat I think you should stay away from SSDs or perhaps run them in IDE mode to be safe. Or you'd bereplacing them every other day.  WHat I"ll be doing is allocating 10% to cache, playing with the trim, keeping it <50% full, and using 60GB cache to run my OS. You do what you like.  Send me your old HDD's though. Ever try formatting an SSD? And then it actually boots as if you hadn't formatted? Hey you thinkinn maybe sentient Macs experience phantom limb syndrome?
    I find and fix bad blocks and realize 90% of them weren't bad. I don't know maybe the ghosts are back. But maybe it was static shock that temporarily crippled a few blocks. Can't know until touch it with a 0. And there is nothing wrong with 0s.  This is not 1987 and you are not going to hurt your What?  Don't order people to follow this or that advice - are you like the hall monitor around here?  WHy do you tell people what follow? Why do you assume they are here to follow? Do you feel like you just led people to the right path? You feelin good? Because I think we both look like ********.

  • How can I have a canvas and external controls at the same time?

    Typically all the space of an applet is used for 2D or 3D; that is, the applet provides the canvas. I am trying to develop an applet where I only want to use part of the applet space for 3D, and then, outside that space (but still within the applet) I would like to add some controls (e.g. buttons or text fields) to provide some interaction. In other words, I want to have an applet that contains something like a frame for 3D, and some controls outside the frame.
    It may be quite easy, but I am very new to applets. Can anyone kindly give me some suggestions? Any help is highly appreciated!
    Regards,
    Hua

    I got it figured out. Thanks anyway!

  • HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

    I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
    Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

  • Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    Uh .... Yes you can. You just have to understand how the whole thing works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • Can oracle work in shared and dedicated mode at the same time?

    Hi All,
    can oracle work in shared and dedicated mode at the same time?
    Thanks

    A database can work only in one mode at a time.
    If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
    But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
    Thanks!
    M-

  • Can I run a podcast and an app at the same time?

    Can I run a podcast and an app at the same time?

    Yes for most.  You can run a regular app with an audio podcast.  I do not know what could run with a video podcast.

  • Can i run remote profiling and remote debugging at the same time

    can i run remote profiling and remote debugging at the same time .
    i am using jdev9.0.5 and oc4j9.0.4 standalone server.

    i think i am wrong

  • How can I connect to Oracle and SQL server at the same time?

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]
    As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
    SQL Server table to an Oracle table.
    1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
    separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
    your Oracle sales rep about it.
    2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
    version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
    and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
    check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
    as well as a Heterogeneous Connectivity forum on this site.
    3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
    Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
    into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
    this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
    the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
    5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
    additional information.
    HTH

  • Can you capture 1 video and author another at the same time?

    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?

    Wilderness08 wrote:
    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
    The short answer is yes.
    I have just done that and I am happy to report that it worked like a charm.
    I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
    No frames were lost during capture and my test blu-ray project was completed without a hitch.

  • How can I record a microphone and software instrument at the same time in Garageband 10.0.1?  It seems I can record one or the other, but not both at the same time?

    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.  It seems that I can't record the mic input and the software instrument at the same time.  I can record the mic input by itself, and I can record the software instrument by itself (if I don't have a mic input track created), but I can't record them together.
    It seems like this should be an obvious thing to be able to do, but I can't figure out how to make it work.
    Can someone help?
    Thanks,
    Kurt

    Kurt1997 wrote:
    I am trying to record a vocal mic and a keyboard (using a software instrument) at the same time using Garageband 10.0.1.
    you need to "record enable" both tracks:
    http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can i use both windows and OS X in the same hardisk

    I want to install windows 7 ultimate(64 bit) on imac but if i install it can i use both OS X and windows in the same hardisk or do i have to plug in an external hardisk and can i still use OS X or only apple??

    Welcome to Apple Support Communities
    Of course. You can install Windows and OS X in the same hard drive, because that's the purpose of Boot Camp.
    I see you are using OS X Mavericks, so you can install Windows 7 or 8 in Boot Camp > http://support.apple.com/kb/HT5634?viewlocale=en_US Then, follow these steps to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    After installing Windows, your Mac will start up in Windows by default. In order to choose in which operating system you want to start up, just hold the Option (Alt) key while your computer is starting up.
    If you do not want to do heavy tasks in Windows, another option you should consider is to install Windows in a virtual machine with the use of an app like VMware Fusion, VirtualBox or Parallels. This way is more secure and there's no risk to harm your Mac.

Maybe you are looking for