Can I have multiple different vlans in one Single Mode Transparent Firewall

Hi,
I am about configuring Data Center FW (ver 9.2) to protect multi tier Servers Farm; Web, Applications & Data Base. There is a requirement to set the FW in Transparent Mode, while the license is the base 2-contexts, only.
I wonder if One Single Transparent Context, with different bridge-groups, one for each vlan is a workable solution. I have pasted the configuration of the FW, it may help in understanding the setup.
======
firewall transparent
names
interface TenGigabitEthernet0/8
description To Nx7K-1 Port-8
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet0/9
description Nx7K-1 Port-9
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet1/8
description Nx7K-2 Port-8
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet1/9
description Nx7K-2 Port-9
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface BVI1
desc Services Zone
ip address x.x.41.250 255.255.255.0
interface BVI2
description WEB-APPS Zone
ip address x.x.42.250 255.255.255.0
interface BVI3
desc Oracle management
ip address x.x.43.250 255.255.255.0
interface BVI4
descr Oracle DB
ip address x.x.44.250 255.255.255.0
interface Port-channel9
description ECLB Trunk to NX7Ks
duplex full
port-channel load-balance src-dst-ip-port
no nameif
no security-level
switchport mode trunk
switchport trunk allowed vlan 41-44,141-144
interface Port-channel9.41
vlan 41
nameif Services-Outside
bridge-group 1
security-level 0
interface Port-channel9.141
description Services-Inside
vlan 141
nameif Services-Inside
bridge-group 1
security-level 100
interface Port-channel9.42
description WEB_APPS-Outside
vlan 42
nameif WEB_APPS-Outside
bridge-group 2
security-level 0
interface Port-channel9.142
description WEB_APPS-Inside
vlan 142
nameif WEB_APPS-Inside
bridge-group 2
security-level 100
interface Port-channel9.43
desc Oracle management
vlan 43
nameif Oracle_Mgmt-Outside
bridge-group 3
security-level 0
interface Port-channel9.143
description Oracle management Inside
vlan 143
nameif Oracle_Mgmt_Inside
bridge-group 3
security-level 100
interface Port-channel9.44
desc Oracle DB
vlan 44
nameif Oracle_DB_Outside
bridge-group 3
security-level 0
interface Port-channel9.144
description Oracle DB Inside
vlan 144
nameif Oracle_DB_Inside
bridge-group 4
security-level 100

it is possible but it is not scaleable. If I remember correctly you can only have a maximum of 8 BVI interfaces...so this means you can only have 8 subnets going across the ASA. You would also need seperate VLANs for the inside interface and the outside interface since you can not configure two interfaces to be in the same VLAN, and then assign these interfaces to the appropriate BVI group.
Please remember to select a correct answer and rate helpful posts

Similar Messages

Can I have multiple volume levels in one track?

I have a track composed of audio from a cassette recorder of a now deceased relative's voice.
Since the cassette was turned on and off during recording, the recordings are at different volumes.
I have been able to import the cassette into a GarageBand project, and delete dead space, but now I find that the volume is not consistent.
Any way to remedy that? I am wondering if I need to chop it up and make more than one track, and adjust the volume on each track? Will this work as long as the tracks don't overlap?
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
Or can I drag it right from GarageBand to iMovie?
Many thanks, I'm a very new GarageBand user.

JGolomb wrote:
Can I have multiple volume levels in one track?.
search GB's help for "curve"
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
"Share" it to disc
can I drag it right from GarageBand to iMovie?
no

HT4436 can I have multiple icloud accounts on one device

can I have multiple icoud accounts on one device (ipad)?

Are you sure only primary account can use Find my iPhone?
I added a secondary account to my daughters iphone and was able to use it for Find my iPhone.
It warns you that the Find my iphone service will be disabled on the other icloud account.
I think this is a good change so I can use a single account to track all the devices.
Looks like only photostream and documents/data are tied to the primary account.

Can you have multiple itunes accounts on a single computer? want to open a separate one for our daughter (but we will manage it).

just got our daughter a new iTouch, but want to try and keep hers separate from our iPhone stuff. can you have multiple iTunes accounts on a single computer?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

Can you have multiple iCloud's with one Apple ID?

Can you have multiple iCloud's with one Apple ID?

You can have multiple iclouds with multiple id's

Can i have multiple applications open on one page

can i have multiple applications open on one page?

JShimazaki wrote:
Mac OS X Mountain Lion supports multitasking like cbs20 mentioned. Just like MS Windows just press alt+tab to switch to whatever applications you have open.
Actually it isn't Alt-Tab on OS X, it's Command-Tab to use the Application Switcher.
Also, Control+ left/right arrow key will switch spaces if that's what's desired.

Can We have multiple SLEDs maintained in a single Batch

Hi all
Can we have multiple SLEDs maintained within a single batch. This SLED would be maintained at Quant level. One batch will have multiple quants and would be maintained in separate bins. However in LX27 i should see both the SLED for the same batch.
Please Help
Thanks & Regards
Jajati

My sources tell me that batch management is not a part of Retail but of logistics and unfortunately I am not able to move your post to a better thread. However, I suggest you please do a search of all forums using "batch management" as your search criteria.You'll see loads of hits. You might find your answer there or a better place to post your question.

Can you have multiple contact forms in a single Muse site?

I have a site created in Muse that needs to use multiple contact forms of a sort. One is a simple contact form. Two others are sign up forms. In two of the three forms I have to separate the First and Last names. Also in those there are multiple Custom fields and Message fields.
The original simple contact form is working fine and has been. However, I modified one of the pages by adding a second form, the first of the two sign-up forms. It looked great in Muse, but when uploaded to the site, all of the fields were gone, leaving only the Labels in a single paragraph.
Does this mean I can't have multiple contact forms in a single site? If I actually, can, then what might have caused the problem? And what could you suggest for me to try to fix it?
Thank you,
Laura

Thank you for the information, but I cannot find anywhere in help where to find the field names (if that is my problem). I changed all the labels and the corresponding text inside the field (remember, Muse does not give access to code as far as I can tell). When I preview the page in a browser (using FireFox as default, but also tried with IE), everything looks good. When I export to html and open the index.html on my computer, everything still looks great. But when I FTP the page to the website, this is what I get:
First Name:RequiredRescuer Email:RequiredOrganization (if any):RequiredSubmitting Form...The server encountered an error.Form received.Geographic Areas Covered:RequiredRescuer Cell Phone:RequiredRescuer Home Phone:RequiredRescuer Home Address:
RequiredRescuer City:RequiredRescuer State:RequiredRescuer Zip code:RequiredRescuer Country:RequiredVeterinarian Name:RequiredVet Address:RequiredVet City & State:RequiredVet Phone:RequiredRequiredServices Offered:RequiredAdditional Info About You:Required Rescuer (available to general public) RequiredVolunteer (available only to Rescuers)RequiredPhoneRequiredEmailRequiredOtherRequiredLast Name:RequiredImage Verification:Required
How would you prefer to be listed?
How would you prefer to be contacted?
However, this is how it looks on the preview:
So, what is my problem? And how can I fix it?
Thank you,
Laura

Can I have multiple TFS instances use a single SSRS installation

Can I have multiple TFS instances use a single SSRS installation?
Thanks

Hi Kim,
According to your description, you have multiple TFS instances using one Reporting Services instance. Right?
For installing TFS, to use a named instance with Team Foundation Server, you must install SQL Server by using a named instance, or move or restore Team Foundation Server data to a named instance, or create a team project collection on a named instance. Please
refer to the link below:
Work with SQL Server Named Instances
Reference:
Understanding SQL Server and SQL Server Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Can you have 2 different iPhones on one computer?

Can I have 2 different iphones linked to one computer?

Yes, you can. Be sure to give each a distinctive name so you can differentiate between them.
Here are some other tips: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

HT2534 Can you have multiple ITunes accounts under a single e-mail address (i.e. separate accounts for my children and myself?)?

Can you have multiple ITunes accounts assigned to a single e-mail address? i.e. different Apple ID's for my kids and myself, but all assigned to my e-mail address.

No. Each account must have uniquie email address.

Can I have multiple stream types in one object?

For my final project in my data commucnications class I'm writing a client/server socket application that will allow multiple clients to play TicTacToe simultaneously against the game on the server. The teacher is a C/C++ jock, and knows very little Java. We're free to choose any language that will do sockets, and I love Java and don't love C++.
I've built the GUI, and got it to the point that I can reliably connect multiple clients on different machines in the school lab to the Server object, which accepts the new sockets and creates a new thread of ServerGame to do the playing in response to the client's moves. A mousePressed() detects clicks in the grid, and modifies a string to contain the status of the game. I've used a BufferedReader and PrintWriter combination on both sides, to send the GameString back and forth, starting with "---------", then the client makes a move and it changes to "X--------" and the PrintWriter sends it over and the ServerGame makes a move to "X---O----" and send it back, etc, etc. You get the idea. I have a ways to go with the implementation of strategy stuff for the ServerGame's moves, but I like it so far. But now I realize it would be really cool to add to it.
What I want to do, since there can be multiple players, is have a way that it can be like a TicTacToe club. At any one time, it would be nice to be able to know who else is playing and what their won/loss record is. I plan a Player object, with String name, int wins, losses, ties, gets and sets. With Textfields and a Sign In button I should be able to send the Player name to the Server, which can look up the name in a Vector of Player objects , find the one that matches, and sends the Player object for that name over to the Client, and also provide it to the ServerGame. Each player's won/loss record will be updated as the play continues, and the record will be "stored" in the Server's vector when he "logs off". Updates shouldn't be too hard to manage.
So, with that as the description, here's the question -- most streams don't handle Objects. I see that ObjectInputStream and ObjectOutputStream do. So -- am I headed for trouble in using multiple stream objects in an application? I suppose I could just use the object streams and let them send out a serialized String. In other words, I want to add this to my program, but I don't want to lose too much time finding out for myself if it works one way or the other. I already have working code for the String. Without giving too much away, can anyone give me some general guidance here?

Anyway, here's the present roadblock that's eating into the time I have left. I've spent many happy hours looking for what I'm missing here, and I'm stumped, real-time.
I found it was no problem to just send everything over and back with ObjectInputStream and ObjectOutputStream. From the client I send a String with the state of the game, and can break it down and code for decisions in the server as to a response and send the new String back to the client. I now have a Player class with Strings name and password, ints wins, losses, ties. I have a sign-in in the client GUI and old "members" of the club are welcomed and matched with their Player object stored in a Vector, and new members are welcomed and added to the Vector. My idea is to make the Vector static so the clients can have access to the Vector through their individual threads of the Game in the server. That way I should be able to make it so that any one player can have in his client window a TextArea listing who's playing right now, with their won-loss record, and have it updated, real-time.
The problem is that in my test-program for the concept, I can get a Player object to go back and forth, I can make changes in it and send it back and have it display properly at either end after a change. What I'm aiming at in the end is the ability to pass a copy of the Vector object from the server to the client, for updating the status of everyone else playing, and when there's a win or loss in an individual client, it should be able to tell its own server thread and through that update the Vector for all to access. Sounds OK to me, but what's happening is that the Vector that goes into the pipe at the server is not the same as the Vector that comes out the pipe into the client. I've tried all the tricks I can think of using console System.out.println()'s, and it's really weird.
I build a dummy Vector in the constructor with 4 Players. I can send a message to the server that removes elementAt(0), and tell it to list the contents of the Vector there, and sure enough the first element is gone, and the console shows a printout of the contents of all the remaining Player objects and their members. But when I writeObject() back to the client, the whole Vector arrives at the client end. Even after I've removed all the Player elements one by one, I receive the full original Vector in the client. I put it into a local Vector cast from the readObject() method. I believe that should live only as long as the method. I even tried putting clear() at the end of the method, so there wouldn't be anything lingering the next time I call the method that gets the Vector from the server.
What seems the biggest clue is that now I've set up another method and a button for it, that gets the elementAt(0) from the server Vector, changes the name and sends it back. Again, after the regular call to get the Vector sent over, it shows in the server console that one element has been removed. And one by one the element sent over from (0) is the one that was bumped down to fill the space from removeElementAt(). But in the client, the console shows 4 objects in the Vector, and one by one, starting at (0), the Player whose name was changed fills in right up to the top of the Vector.
So something is persisting, and I just can't find it.
The code is hundres of lines, so I hesitate to send it in here. I just hope this somewhat lengthy description tips off someone who might know where to look.
Thanks a lot
F

HT204053 can I have multiple icloud accounts for one apple id?

I have multiple people in my family using our original apple id . As they have gotten iphones, macbooks, etc they register there devices under our originale apple id. over the holidays when my youngest child got her ipod touch and registered it for icloud, two of the children now are seeing each others texts? Is there a way to use the same apple id for the family and have seperate icloud accounts for each person or should we have a seperate apple id for each person?

Yes but the issue with receiving each other's text messages is not being caused by sharing the same iCloud account. To fix this, each person needs to be using a separate Apple ID for iMessage on their devices. (Note: you can continue to use the same iTunes account on all your devices but each person should use a different ID for iCloud, iMessage and FaceTime). There are a couple of things you need to do to sort all this out.
First decide who will be keeping the current ID for all services. On the device(s) belonging to the other people in your family, go to Settings>Messages>Send & Receive, tap the Apple ID, sign out, then sign back in with a saparate ID for each person. After doing so you will no longer be getting each other's messages on your devices.
Next, to avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime.
For iCloud, to avoid having merged data by syncing with the same iCloud account you will need to migrate each person to their own iCloud account. To do this, first decide who will be keeping the current account. On the other devices go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from the device, not from iCloud. The device(s) that will be keeping the current account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My [iDevice]. Next, set up a new iCloud account using a different Apple ID on the device(s) belonging to each person. Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data in your iCloud accounts you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting the other person's contacts from your account, and vice versa).

How can you have multiple, different css link styles?

Every time I want to create a different looking link just for some copy, it always reverts to the A:link style, even if I create a new style that looks just the way I want. How can I create multiple link styles and then be able to select the one I want at any time???
I would greatly appreciate any help.
Allan

How are you applying the different styles to your links? In most cases, it's easiest to wrap the link(s) in an element, like a < div > that has a class or ID assigned, for instance class="altLinks". Then, set up the CSS style names like:
.altLinks a:link
...and so on. Then, the styles would just apply to links within the element(s) with class "altLinks". Here's a tutorial that might also help:
http://www.golivecentral.com/pages/tutorials.shtml#basicCSSlinks2
Otherwise, if you're still having trouble, post back with a link to your page so we can see what's going on.

Can I have multiple different vlans in one Single Mode Transparent Firewall

Similar Messages

Maybe you are looking for