Can I have multiple TFS instances use a single SSRS installation

Can I have multiple TFS instances use a single SSRS installation?
Thanks

Hi Kim,
According to your description, you have multiple TFS instances using one Reporting Services instance. Right?
For installing TFS, to use a named instance with Team Foundation Server, you must install SQL Server by using a named instance, or move or restore Team Foundation Server data to a named instance, or create a team project collection on a named instance. Please
refer to the link below:
Work with SQL Server Named Instances
Reference:
Understanding SQL Server and SQL Server Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

  • Can We have multiple SLEDs maintained in a single Batch

    Hi all
    Can we have multiple SLEDs maintained within a single batch. This SLED would be maintained at Quant level. One batch will have multiple quants and would be maintained in separate bins. However in LX27 i should see both the SLED for the same batch.
    Please Help
    Thanks & Regards
    Jajati

    My sources tell me that batch management is not a part of Retail but of logistics and unfortunately I am not able to move your post to a better thread. However, I suggest you please do a search of all forums using "batch management" as your search criteria.You'll see loads of hits. You might find your answer there or a better place to post your question.

  • Can you have multiple contact forms in a single Muse site?

    I have a site created in Muse that needs to use multiple contact forms of a sort.  One is a simple contact form.  Two others are sign up forms. In two of the three forms I have to separate the First and Last names.  Also in those there are multiple Custom fields and Message fields.
    The original simple contact form is working fine and has been.  However, I modified one of the pages by adding a second form, the first of the two sign-up forms.  It looked great in Muse, but when uploaded to the site, all of the fields were gone, leaving only the Labels in a single paragraph.
    Does this mean I can't have multiple contact forms in a single site?  If I actually, can, then what might have caused the problem?  And what could you suggest for me to try to fix it?
    Thank you,
    Laura

    Thank you for the information, but I cannot find anywhere in help where to find the field names (if that is my problem).  I changed all the labels and the corresponding text inside the field (remember, Muse does not give access to code as far as I can tell).  When I preview the page in a browser (using FireFox as default, but also tried with IE), everything looks good.  When I export to html and open the index.html on my computer, everything still looks great.  But when I FTP the page to the website, this is what I get:
    First Name:RequiredRescuer Email:RequiredOrganization (if any):RequiredSubmitting Form...The server encountered an error.Form received.Geographic Areas Covered:RequiredRescuer Cell Phone:RequiredRescuer Home Phone:RequiredRescuer Home Address:
    RequiredRescuer City:RequiredRescuer State:RequiredRescuer Zip code:RequiredRescuer Country:RequiredVeterinarian Name:RequiredVet Address:RequiredVet City & State:RequiredVet Phone:RequiredRequiredServices Offered:RequiredAdditional Info About You:Required Rescuer (available to general public) RequiredVolunteer (available only to Rescuers)RequiredPhoneRequiredEmailRequiredOtherRequiredLast Name:RequiredImage Verification:Required
    How would you prefer to be listed?
    How would you prefer to be contacted?
    However, this is how it looks on the preview:
    So, what is my problem?  And how can I fix it?
    Thank you,
    Laura

  • Can you have multiple itunes accounts on a single computer?  want to open a separate one for our daughter (but we will manage it).

    just got our daughter a new iTouch, but want to try and keep hers separate from our iPhone stuff.  can you have multiple iTunes accounts on a single computer?

    This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

  • Can I have multiple Ipad airs using the same i tunes account?

    Can I have mutiple Ipad Air using the same I Tunes account?

    Yes. Are you also talking about them using the same Apple/iTunes/iCloud ID for signing on?
    GB

  • HT2534 Can you have multiple ITunes accounts under a single e-mail address (i.e. separate accounts for my children and myself?)?

    Can you have multiple ITunes accounts assigned to a single e-mail address?  i.e. different Apple ID's for my kids and myself, but all assigned to my e-mail address.

    No. Each account must have uniquie email address.

  • Can I have multiple iChat users under a single Mobile me account?

    I set up iChat with my Mobile Me account. But we have multiple users of iChat in the house, and each have their own MacBook log-in, etc. Can I set up each of the other users using a single Mobile Me account? {does this make sense?}

    Can I set up each of the other users using a single Mobile Me account?
    No. Use an AIM account instead.
    (47850)

  • Can I have multiple different vlans in one Single Mode Transparent Firewall

    Hi,
    I am about configuring Data Center FW (ver 9.2) to protect multi tier Servers Farm; Web, Applications & Data Base. There is a requirement to set the FW in Transparent Mode, while the license is the base 2-contexts, only.
    I wonder if One Single Transparent Context, with different bridge-groups, one for each vlan is a workable solution. I have pasted the configuration of the FW, it may help in understanding the setup.
    ======
    firewall transparent
    names
    interface TenGigabitEthernet0/8
     description To Nx7K-1 Port-8
     channel-group 9 mode passive
     no shutdown
     no nameif
     no security-level
    interface TenGigabitEthernet0/9
     description Nx7K-1 Port-9
     channel-group 9 mode passive
     no shutdown
     no nameif
     no security-level
    interface TenGigabitEthernet1/8
     description Nx7K-2 Port-8
     channel-group 9 mode passive
     no shutdown
     no nameif
     no security-level
    interface TenGigabitEthernet1/9
     description Nx7K-2 Port-9
     channel-group 9 mode passive
     no shutdown
     no nameif
     no security-level
    interface BVI1
     desc Services Zone
     ip address x.x.41.250 255.255.255.0
    interface BVI2
     description WEB-APPS Zone
     ip address x.x.42.250 255.255.255.0
    interface BVI3
     desc Oracle management
    ip address x.x.43.250 255.255.255.0
    interface BVI4
     descr Oracle DB
     ip address x.x.44.250 255.255.255.0
    interface Port-channel9
     description ECLB Trunk to NX7Ks
     duplex full
     port-channel load-balance src-dst-ip-port
     no nameif
     no security-level
    switchport mode trunk
    switchport trunk allowed vlan 41-44,141-144
    interface Port-channel9.41
     vlan 41
     nameif Services-Outside
     bridge-group 1
     security-level 0
    interface Port-channel9.141
     description Services-Inside
     vlan 141
     nameif Services-Inside
     bridge-group 1
     security-level 100
    interface Port-channel9.42
    description WEB_APPS-Outside
     vlan 42
    nameif WEB_APPS-Outside
     bridge-group 2
     security-level 0
    interface Port-channel9.142
     description WEB_APPS-Inside
     vlan 142
     nameif WEB_APPS-Inside
     bridge-group 2
     security-level 100
    interface Port-channel9.43
    desc Oracle management
     vlan 43
     nameif Oracle_Mgmt-Outside
     bridge-group 3
     security-level 0
    interface Port-channel9.143
     description Oracle management Inside
     vlan 143
     nameif Oracle_Mgmt_Inside
     bridge-group 3
     security-level 100
    interface Port-channel9.44
    desc Oracle DB
     vlan 44
     nameif Oracle_DB_Outside
     bridge-group 3
     security-level 0
    interface Port-channel9.144
     description Oracle DB Inside
     vlan 144
     nameif Oracle_DB_Inside
     bridge-group 4
     security-level 100

    it is possible but it is not scaleable.  If I remember correctly you can only have a maximum of 8 BVI interfaces...so this means you can only have 8 subnets going across the ASA.  You would also need seperate VLANs for the inside interface and the outside interface since you can not configure two interfaces to be in the same VLAN, and then assign these interfaces to the appropriate BVI group.
    Please remember to select a correct answer and rate helpful posts

  • Cannot have multiple flvplayback instances using fullscreen

    Hello,
    I am using AS3 with CS5. I created a flash project which contains multiple instances of flvplayback. Each plvplayback plays a separate video and each has its own controls. It all works fine when playing, pausing and controlling the videos. The problem is with the fullscreen functions. If I click the fullscreen button on the first flvplayback, it makes the second video go full screen. If I click the second video fullscreen button, it opens fine into its own video except when I do it three to four times. After three to four times of toggling fullscreen on the second video, it opens the first video into the browser larger than its original size but not full screen. I have tried recreating the flvplayback instances by re-importing the video files. Each flvplayback has been given its own instance name. Even when I create a separate custom button, not part of flvplayback, and give it the command to launch fullscreen on the first video, it still opens the second video to fullscreen. When I use just one video and remove the other ones, toggling fullscreen works fine for that particular video.
    I don't understand what it is going on. This is a very strange problem. Maybe I'm missing something basic so if someone can please help me on this I would greatly appreciate it.
    Thanks,
    Kris

    Using fullScreenTakeOver=false prevents only the case that flvplayback become fullscreen by  stage.displayState='fullScreen' .  
    I'm also seeking for a solution for this bug, unfortunately no luck so far.

  • Can you connect multiple VMM Instances to a single Operations Manager 2012/R2 Deployment

    Hi Everyone,
    Just seeking some clarification around the Operations Manager and Virtual Machine Manager integration.  Is it possible to integrate multiple Virtual Machine Manager 2012 Deployments with a single Operations Manager 2012 Deployment or is the connection
    between VMM and OM a 1:1 relationship?
    Thanks in advance,
    Hayden

    Yes VMM and OM 1:1 is supported. 
    Theoretically many VMM can integrate with single OM but its not very realistic and well tested as it puts several configuration and performance constraints on each of the VMMs.
    I’d recommend installing SCOM (inside a VM is fine)  per VMM if possible .
    [Disclaimer] This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all.

  • Multiple ASM instances on a single node

    Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc
    Thanks
    Sannidhi

    I had been discussing the same issue with someone from Oracle. I asked for multiple ASMs on a server so that we could have seperate ASMs running for, say, 10g and 11g.
    He explained that we should think of ASM as being the same as Veritas FileSystem. We don't run multiple instances of Veritas on our servers. On single Veritas "instance" (set of drivers) provides all the Veritas Fx mountpoints on the server. Similarly, there should be only 1 ASM instance on a server.
    (substitute UFS or ZFS or CFS for Veritas in the above example and you still have only 1 filesystem manager on a server providing one type of filesystem, although you could have, say , UFS and Veritas co-exist ; just as you could have Veritas, ASM and Raw co-exist on a server).
    Hemant K Chitale
    Edited by: Hemant K Chitale on Sep 29, 2009 11:50 AM

  • Can there be multiple ASM instances on single node?

    Hi,
    Can there be multiple ASM instances on single node?
    This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
    And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
    Thanks in advance.
    Thanks,
    Harsha
    Edited by: user498756 on Sep 11, 2008 2:23 AM

    ...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
    The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
    Again - I cannot think of a good reason to do so though!
    -Bob

  • How Can I Use Multiple Weblogic Instances in a Single OS

    Hello Everyone,
    Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle  Enterprise Linux 5.
    Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
    I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
    The main problem here is :
    In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
    What might be the issue?
    I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
    Can anyone suggest a resolution for this please ?
    Thanks in advance.

    Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

  • HT204053 can you have multiple apple id's for the family but we all use the same iCloud?

    Can you have multiple apple id's for the family members but we all us the same iCloud account?

    You'll have to have an ID you all share in order to have a shared iCloud account. It would be sensible for each person to have their own ID and their own iCloud account for email and their own data (each would be on their own computer/iOS device or user account on a Mac) and then have a common account which everyone would sign into in System Preferences>Mail, Contacts and Calendars to access shared data.
    You don't want to be all using the email in a common account - if people are using email aliases remember these can't be detached from the account and transferred to another one. Having all your emails mixed up together can be somewhat impracticable.

  • TS5223 can I have multiple users use one apple account?

    can I have multiple users use one apple account?

    I interpreted his post to mean that he meant multiple human users, not multiple devices.  Hopefully, he'll clarify.

Maybe you are looking for