Can I have unique decision table name in the BRF Plus System?

Hi All,
In BRF Plus , we can create more than one decision table with the same name in the same application or across different applications.
We have a requirement were in we have to setup a framework so that we don't have duplicate decision name or any expression name across system. We need to maintain unique name.
One way is to control this by having particular naming conventions but still there will be room for errors.
Is there are way to activate the unique name for decision table name across or within application?
Thanks.

Hi Sainath
Carsten is of course always correct.  That said I can understand the desire - if only to avoid confusion for business users.  Sounds like a good use case for the new DSM deployment approval workflow perhaps? But in the short term either application exits or custom programs are the most likely solutions
Hope that helps
Jocelyn

Similar Messages

  • TS2972 can i have two apple id's on the one mac system?

    I have an iphone 4s and my husband just got the new iphone 5.  I have created him a new apple id. is it possible for us both to use the same itunes library i we have different id's? 
    thanks

    iOS does not support multiple users like a desktop OS does.
    You can use a web interface to your respective email accounts
    to keep things separate; but there is no provision for otherwise
    separating photos, media, etc.
    If you wish, you can contact Apple to let them know of your desire:
         www.apple.com/feedback

  • Can anyone tell me the field name, table name for the following scenario?

    Hi All,
    Can anyone tell me the field name and the respective table name for the following scenario's?
    1. A report to list all the materials to which Invoice is done and delivery is pending.
    2. A report for Order tracking.
    3. A report, which gives PO(Purchase Order),  Pricing details.
    4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from  stock.
    Thanks & Regards,
    P.Gowrishanker
    Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

    I believe that OmniVision Technologies has the contract for the 3gs.

  • I have downloaded the SMS in Iphone to my PC. I am able to seen the other person photo in the conversation but my photo is missing can i attach my photo and name in the message?

    hi,
    I have downloaded the SMS in Iphone to my PC. I am able to seen the other person photo in the conversation but my photo is missing can i attach my photo and name in the message?

    I would think that would be something to ask the support for the software you used to download the SMS to the computer with.

  • Can I rename a exisiting table name ???

    Dear All,
    Can I rename a exisiting table name ???.
    Thanks You!!
    Regards
    Venkat

    u cannot rename a table. only you can copy the table you want to one with a name of your wish.
    go to se11.
       enter the table name(source)
           press (control+F5)
    enter the target table name.
    regards,
    srinivas
    <b>*reward points for useful answers*</b>

  • How can one find the table name of the Delta Que and setup table?

    Hi !
    Is there any method to find the table name of the delta que and Extraction que ?

    setup table = <extract structure>_setup
    example: setup table for MC11VA0ITM = MC11VA0ITM_SETUP
    Delta Queue is based on following 3 tables:
    ARFCSDATA
    ARFCSSTATE
    TRFCQOUT
    assign points if useful ***
    Thanks,
    Raj

  • Bex Query: Too many table names in the query The maximum allowable is 256

    Hi Experts,
    I need your help, Im working on a Query using a multiprovider of 2 datastores, I need to work with cells to assign specific acconts values to specific rows and columns, so I was creating a Structure with elements from a Hierarchy, but I get this error when I'm half way of the structure:
    "Too many table names in the query. The maximum allowable is 256.Incorrect syntax near ')'.Incorrect syntax near 'O1'."
    Any idea what is happening? is ti possible to fix it? do I need to ask for a modification of my Infoproviders? Some one told me is possible to combine 2 querys, is it true?
    Thanks a lot for your time and pacience.

    Hi,
    The maximum allowable limit is 256 holds true. It is the max no. of characteristics and key figures that can be used in the column side. While creating a structure, you create key figures (restricted or calculated) and formulas etc.. The objects that you use to create these should not be more than 256.
    http://help.sap.com/saphelp_nw70/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/frameset.htm
    Not sure if combination of 2 query's is possible.  You can use RRI. Or have a woorkbook with 2 queries.
    Hope it helps.

  • Table name for the status Cstd

    Hi
    Need the table name for the sales order line item status Cstd
    Steps
    Go to the sales order line item
    go to the Tab status
    under that in processing status--> system status
    here Cstd is there but we are not able to find the table name for that
    Strecture is RV45A and field name is STTXT
    we are planing to restrict the PP order being released if the status is not Cstd
    PP order should release if the status in Sales order line item is Cstd
    Can you help to findout the table name foth above field
    Thanks
    Kameshwar Rao

    Hi
    Table name is VBUP and the method to check the  creation of Production order is BADI workorder_update
    I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
    OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
    br, Ajay M

  • Table name for the transaction data

    Hello Gurus,
        what is the table name for the transaction data which we have created through t.code PRO5. we are generating report for the total kms per vehicle type for a employee. these data in which tables can i get? the data related to trips ? 
    thanks in advance
    regds
    ramachandra

    Hi,
    Pl use RPR_TRIP_HEADER_DATA programme for getting general trip data, which will have details about number of KM travelled by employee for each trip, amount to reimbursed to the employee etc.
    Thanks,
    Nandagopal C

  • Table name where the text attachments stored

    Hi folks,
             I have created an text attachment while creatng PR. where do these attachments store. In which table can  i see the attachments that i have made while creating PR.Please suggest.
    Shyam.

    Hi Abhishek,
                   thanks for your anshwer. But, If it is just text we can read using READ_TEXT, but i need to check whehter is attachment is created for a specific PR or not. Any input on the table name, where the attachments are stored..
                        Thanks,
                        Shyam.

  • Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • Using column value is it possible to find the table name in the database?

    Hi all,
    using column value is it possible to find the table name in the database?
    guys i need the table value
    Note:
    oracle-9i
    for example:
    i don't know NIC(column value) in which table in the database.
    Thank you,
    with regards,
    JP.
    Edited by: Guest on Feb 27, 2012 5:42 AM

    Hi,
    As far as I understand what you are asking for I would suggest 4 data dictionaries that will help you to know the table name from the column names
    1. USER_TAB_COLS
    2. ALL_TAB_COLS
    3. DBA_TAB_COLS
    4. COLS
    These can give you detail information about the columns and respective tables at user, schema, dba level. Further information on the table can be found by querying ALL_OBJECTS table giving table_name as Object_name, or you can join the data dictionaries too.
    To know about various data dictionaries avalible in Oracle please query select * from cat;
    Let us know if you need further assistance.
    Twinkle

  • How can i receive the user name of the present operating system

    HI,all.
    how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!

    use sy-uname system field.
    report ztest.
    write:sy-uname.
    thanks.
    reward if solved.

  • Can I have more than 1 susbcriber with the same email address?

    I have developed a BC secure zone in Muse as a members only area. This works fine. I have subscribed all the members and all is OK except that I find if I try to subscribe 2 members with the same email address (e.g. a married couple with a shared email address), the first subscription is overwritten by the second. Is there a solution or do I just live with it?

    Hi Neil,
    This is the default behavior of the system because email is the unique identifier. You can't have more than 1 subscriber with the same email address.
    Regards,
    Aish

Maybe you are looking for

  • InDesign crashes on export to IDML. Both Mac and Windows

    Hello, We are working on a book. Now that we've started indexing, we've run into a nasty bug that corrupts our file and causes InDesign to crash. We saw suggestions to export the file to IDML and then reopen in InDesign. We've done that several times

  • A unique library for each iPod, but still sharing content

    Each member of our household has an iPod, four in total, and their own HP laptop, one running Windows 7 and the others running Vista. Currently I synch all to an iTunes library on my laptop (Windows 7), with everyone sharing the same Apple ID for pur

  • Problem with note 407975

    Hello, I'm tried to follow the steps of note 407975, to apply  the enhancement MM06E005. In that document specify that some EXITS of the enhancement, are in the INCLUDES listed below. EXIT_SAPMM06E_006 --> LXM06F36 EXIT_SAPMM06E_007 --> LXM06F38 EXIT

  • Failed to play test tone

    When ever I try to play any sound, nothing happens.  When I go into the control panel and double click on the "sound" icon, it shows my speakers.  And when click on my sound device or speakers, and hit test, the message I get it "failed to play test

  • Error adding editable region in nested template Header

    I have a base template for the website (establishing basic menus), and a secondary template using that base template, which establishes a common table layout for one part of the site. Having created the PHP to drive the page, I need to lock down that