Can I hide data forms from users in Smartview?

I thought the "Allow offline usage" option was what controlled whether or not a form could be accessed in Smartview, but I appear to be wrong. Is there a way to limit the forms that users can see in the Open Forms option in Smartview?
We have a small set of forms we are thinking of allowing users to use Smartview to enter data in, but do not want to have them all visible. I can't find this topic in the documentation or in any of the other posts.
11.1.1.3.
Thanks.

Go to Display Properties and check the box "Make data form hidden". Before that you could export the form to Excel as a Smart View worksheet and keep that for distribution to your users.

Similar Messages

Unable to Access Data Form with Users Provisioned as 'Planner'

Hello,
I am currently experiencing an issue that I can't seem to resolve. I was hoping someone else might have some insight and/or have come across this issue.
I created two data forms. Users have been assigned permissions to the dimensions included in the data form. I have also assigned users access to the data form. The model is a single currency model.
Upon logging into the application, the user is unable to open the data form unless he/she is provisioned as an 'Administrator'. Provisioning the user as a 'Planner' or 'Interactive User' does not allow the user to open the data form. The following message appears:
*"Security and/or filtering has resulted in a required dimension not being represented on this data form."*
My data form uses the following dimensions:
POV: ELEMENT
PAGE: SCENARIO, YEAR, VERSION, ENTITY
ROWS: ACCOUNT
COLUMNS: PERIOD
We are currently implementing Hyperion Planning 11.1.2.0. The operating system is Windows Server 2008 64-bit R2.
Any advice/suggestions on how to resolve this would be greatly appreciated. Thank you.
Corey

I went ahead a created a data form that just used level 0 members and confirmed that the user had access to the members defined in the form. Still no luck.
I also checked to make sure the filters existed in Essbase. Here is what I found in Essbase:
Access: None
Member Specification: @IDES("Account"),@IDES("Scenario"),@IDES("Version"),@IDES("Entity"),@IDES("NTTA_ELEMENT")
I have no issues accessing the data through the Essbase Add-in.
I did notice some additional items in my Planning setup:
1. Task>Manage Process - Sub-Status states 'Failed' when I attempt to validate
2. Task>Manage Process - Status changes from 'Not Started' to 'Under Review' when I start the cycle.
3. Dimension Security - Users are attached to a group that has write access at the Descendent(Inclusive) level.
4. In the Account, Department, Scenario and Version dimensions I also setup the user to have write access at the member level.
As for my earlier post with the data forms, that was just my way of showing the dimensions used. I do have two data forms, 1) with top level and descendants/children and 2) with level 0 members only.
I checked the logs and there isn't really much info there. I have a case open with Oracle and a webex scheduled for tomorrow.
Thoughts?
Thanks
Corey

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

How can I hide the password and user name in url???

Hi experts,
I'm creating a login page and know I have a problem.
The Username and password are verified in a Java class, after checking the user and password, the user should be linked to the portal.
So far everything has worked well.
But when I call the lin like this
res.sendRedirect ("/ irj / portal j_user =" + UserN + "& j_password =" + passw);
then the user name and Pwasswort appears in the url.
Can someone tell me how can I hide the password and user name???
It will be very helpful.
Thank you
Edited by: Cilvaring on Aug 5, 2011 12:00 PM

If there is no specific reason that you have to use sendredirect...thne you can try request.forward.....
RequestDispatcher rd = request.getRequestDispatcher("pathToResource");
rd.forward(request, response);

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
If you have a Time Machine backup you may also be able to use that to retrieve them.

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

Can't create Data Set from BI analysis

Hi,
I use BIP 11g and I want to create new Data Set based on Oracle BI Analysis. But when I choose my analysis (query) in BI catalog and click Ok button it show me Processing.. and then... nothing happends (Browser still show me window Create data set - Oracle BI Analysis )
So I can't create Data Set from BI analysis.
Is there anybody who made this well?
Any one has idead on how to resolve this?
Thanks,
Dmitry

Hi,
Could you explain how you solved this issue. I am having the same problem but I am not using cyrilic symbols.
Regards.

I can buy an iPhone 5 from users and it has been icloud, now I can not find it's owner, so anyone show me how to open it not, sir, thank you

I can buy an iPhone 5 from users and it has been icloud, now I can not find it's owner, so anyone show me how to open it not, sir, thank you

There is nothing you can do then. You have a brick.
The phone has an Activation Lock on it, and there is no way to get around it:
http://support.apple.com/kb/ht5818
Sorry,
GB

Export data forms from unix

Hi,
we have installed planning in Unix,Can any body help on, how to export data forms?
we have tried to export as normal way...but its not wrking....see below wt it is giving after enter the correct format...
server(user):./FormDefUtil.sh export "Form1" localhost admin passwrd TestApp
Usage: HspFormDefUtil <import/export> <filename/formname/-all> <server> <username> <password> <application>
Please help on it....
Note: i heard that we can't run from unix box? if it is correct then how can we export the forms?
Thanks,

Hi John,
Thanks for quick reply.
we are using Planning 9.3.1.1 version.
Its not updating any log...its just giving like below.....
just its coming out.that's it. its not updating any log(planning log/FormDefUtil.log)
server(user):./FormDefUtil.sh export "Form1" localhost admin passwrd TestApp
Usage: HspFormDefUtil <import/export> <filename/formname/-all> <server> <username> <password> <application>
server(user):
Even FormDefUtil.log also not updated anything...
Please help.

Excel data read from users and upload in to Oracle DB using custom webpart

Hi Team,
I need to get the excel date from user using file upload control and read the data from the excel using custom webpart and validate the each rows whether having the values or not and need to upload the data to the oracle database.
Can you please let me know the best approach to read the data from excel using sharepoint custom webpart.
Thanks,
Mylsamy

Hi,
According to your post, my understanding is that you want to read excel data from the uploaded file and insert the data into Oracle Database.
The following way for your reference:
1.Create a Visual Web Part using Visual Studio.
2. Add an asp.net upload control into the .ascx file.
<div>
<asp:FileUpload ID="fileupload" runat="server" />
<asp:Button ID="btnUpload" runat="server" onclick="btnUpload_Click" Text="Upload" />
</div>
3. Add some logic methods into .ascx.cs file.
protected void btnUpload_Click(object sender, EventArgs e)
//read data and insert the data into Oracle database.
4.We can create a web service for adding data to Oracle database, then consume this web service in the visual web part.
More information:
http://msdn.microsoft.com/en-us/library/ff597539(v=office.14).aspx
http://manish4dotnet.blogspot.in/2013/02/upload-ans-read-excel-file-using-c.html
http://msmvps.com/blogs/windsor/archive/2011/11/04/walkthrough-creating-a-custom-asp-net-asmx-web-service-in-sharepoint-2010.aspx
Best Regards
Dennis Guo
TechNet Community Support

How can I transfer data form one data store to another iview /dats store

Hello,
I have two iview and want to transfer the data from my data store (main iview) to the nested iview (or the data store in nested iview)
Can you give me instructions, how I can implement this with the signal in and outports.
Thanks
Bst regards
thomas
I

Hi Thomas
Pass the output data of one iview to another(by connecting the output of the 1st to the input of the 2nd) and then Signal Out the combined data of the two iviews from the 2nd iView using a event(say, a submit button) from the 2nd iView.
Connect the signal out to the nested iView(main iView) by composing a Signal In on the nested iView.
Next, inside the nested iView design layout push the values from Signal In to a data store.
Now you could access all the data @datastore from any no. of forms inside the nested iViews.
Regards
Navneet

How can we hide userid & password from browser

How can we hide the userid,password and connectionstring from the address bar of explorer when we run 9i forms on browser

Ok - I have 9.0.4 and I want to disable this hiding of password, as I have the follwing problem: Forms creates a temporary local file which contains javascript. Per default in xp service pack 2 it is not allowed to run javascript from local file. Is there any parameter in webforms.cfg to disabel the creation of this temporary file?

Can i create a form from one that i had done before

Can i convert a form that i had already created in word or excel?

Thank youthat was the first post I ever submitted.
I think I figured it outI was referring to Forms Creator. I want to use
this tool to create forms for a Policy and Procedural Manual and Forms that
I am creating. I want the forms to be ³active² so that the user can fill out
the proper documents on the computer as needed instead of transferring info
from a paper filled out form or document. Does that make sense? I
discovered that I needed to save the form or document that I have already
created to a PDF format. The allow Adobe to identify the fields
automatically then I can tweak from there. I am in the process of doing one
now.
If you any suggestions/short cuts, etcfeel free to let me know.
Thank you for your response.
Frank

Triggering a smart form from User exit

Hi Gurus,
I need to trigger a smart form from a user exit.
The tcode name is COR1.there is a exit for this tocde.
This exit should be used to trigger the smart form.
User exit to be executed upon saving the Process order number.
Thanks in advance.
Edited by: vinay raj on Apr 13, 2009 9:38 AM

Hi,
You can write a Custom program i.e. the driver program for your smart form.
And submit that program in the exit. i.e. use the submit statement to run that program.
I hope this might help you.

Can i exclude data file from recovery

Hi
i am on 8.1.7.4
i had a test offline datafile which causes problem when i restore recover my db
i restored my db
recover it , but i am missing an archivelog , which prevent me from recovery of the whole of my db
i can't open resetlogs;
can i exclude this datafile from recovery , or deleted completely
i tried alter database datafile 81 offline;
but still the db feels it needs to rcover it
Thanks

Hi,
Its not like to try one by one command, do you check what the errors he have post?
SQL> Alter database open resetlogs;
Alter database open resetlogs
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'F:\ORADATA\DB\TCOR_SYSTEM_01.DBF'
SQL> user,
can you check these two views?
select file#, status, checkpoint_change# from v$datafile;
select file#, status, fuzzy, checkpoint_change# from v$datafile_header;Then we can find which one is new one which one is old?
Thanks.

Can I hide data forms from users in Smartview?

Similar Messages

Maybe you are looking for