Can I hide or remove the bootcamp assistant launch icon?

I clicked the bootcamp assistant icon and it opened a window that will not close.  How do I get rid of it?

I don't know if this is still an issue for you if so, then hopefully this will help. Place your mouse over the icon, press down and a menu should pop up that has the offer to "quit" select it and it is gone from your launchpad!

Similar Messages

  • How can I remove the BootCamp partition? as the size i created ws too small to install MS Office on 64Bit Windows 8.1 on MacBook Pro (Aug'13)

    How can I remove the BootCamp partition drive for Windows 8.1, as the size which I created was too small for me to install Microsoft Office onto Windows 8.1 64-BIt. The machine which I have is the MacBook Pro 13' inch purchased in August 2013.

    Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

  • Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.

    I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.

    Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.

  • When I ran the bootcamp assistance for software update I get an error that it can't download from the server

    Install Mac OS X lion fine without any issue
    I'm trying to dual boot Lion and Wind 7 on different HD but when I ran the bootcamp assistance for software update I get an error that it can't download from the server.
    I also try without downloading the software and do the installation but it fail. It seem that this bootcamp is giving problem so I revert back to SN leopard and it does the same. Why can't the bootcamp assistance update the software, is it something that I did wrong or my system is not supporting dual booting.
    Here is my spec
    Apple Mac Pro "Quad Core" 2.66
    Identifiers: Mac Pro - MA356LL/A - MacPro1,1* - A1186

    MacPro1,1 has EFI32 and does not support Windows 7 very well, can't boot 64-bit, can't use all your RAM.
    There have always been trouble and issues, ways around those, but a big PITA too.
    Select CD-ROM Boot
    Select CD-ROM Boot Error Apple
    Nothing to do with Lion actually. Other than downloading drivers from Apple servers has been mostly hit or miss, with miss being 90%.
    I have rebuned the DVD (make a new ISO image using Imgburn etc) but now I just install Windows on PC then move the drive to the Mac. A lot easier.
    Without 64-bit you can't use more than 1.9GB RAM. And you need Windows 7 Pro to use both processors.

  • I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

    As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
    P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

    You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
    I think the following may help me (In case anyone els is looking):
    http://support.apple.com/kb/DL830

  • I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive. What do I do?

    I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive but I am not sure. What do I do? I haven't ruined my iMac have I?

    Help! I can't do my college homework if I can't run windows on my iMac! (school is on windows, limited access to the library)

  • Problem after the uninstall  of windows with the bootcamp assistant!!!!

    I have too problems: The first is my bad english i like to excuse for that. I hope you can even so understand my main problem. I try to describe it to you: I install windows on my mac. After a short time i decide, i don't like it and i uninstall it with the bootcamp assistant. Than i want to start my mac but it didn't work. My mac want to start windows even though I install windows.
    I think there is something that isn't uninstall but i don't no where and what i can do against this problem???

    If you can't boot into OS X, then hold down the Option key on startup, and select your OS X partition.
    After that, do what the above poster said, so that the Mac knows to always boot to that volume.

  • How can I erase (or remove) the hard drive from a dead Time Capsule?

    How can I erase (or remove) the hard drive from a dead Time Capsule?

    I found this having had the same problem...
    http://forums.macrumors.com/showthread.php?t=553818
    Having removed the hard drive I'm finding I can't reformat it. I manage to mount the HD but Disk Utility crashes when trying to format (HD attached to Mac via Newer Tech. SATA cables to USB) and causes what I think is a kernal panic on my Mac which hard crashes. I see 3 partitions when attempting to mount one of which is AFP. Anyone got any ideas about how to do this? I've dug around but the only progress I've made is to note others have had to work around ACL's when replacing the logic board of the TC. Not sure if this even relates to the problem. However the tool for doing this seems to have been removed from SL. (Forum references to this procedure all relate to 10.5).

  • How can i hide or lock the apps on ipad

    How can i hide or lock the apps on ipad, i don't want anyone to see some apps when my ipad was used. Without Jailbreak.

    It depends what you mean by 'lock' if you mean keep the iPad on a specific app that's easy to do as long as you are updated to iOS 6 which from your device information I can see your iPad is updated to iOS 6.0.2. All's you have to do is go to Settings > General > Accessability > Guided Access > ON > Set Passcode (Set a passcode to lock an app onto the screen). Go back to the home screen and click the app you would like to lock onto. Press the home button three times quickly. You can then highlight certain parts of the app you would not like them to be able to press, disable touching or motion if thats what you need. Press start. To exit the locked app triple press the home button again and type in the passcode you set earlier. Press end in the top left corner. I hope this helped you but if by 'lock' you meant don't allow on the app this is not possible as of yet with the iOS software although some apps do allow you to lock them with a passcode or you could try restrictions in the settings menu but this only works with built in apps such as; camera, facetime, safari, downloading apps, siri etc.

  • Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
    It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
    Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
    Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
    Dual 1.8 G5   Mac OS X (10.4.3)   1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

  • HT201304 how can i disable or remove the private browsing in safari on my childs iphone

    how can i disable or remove the private browsing in safari on my childs iphone

    By voiding your warranty and hacking it. There may be other fixes though. Try resetting network settings in settings>general>reset. If that doesn't work try a hard reset. If that doesn't work then backup, restore as new, then from backup

  • How do I remove the "TOC" btn in the playbar WITHOUT removing the TOC "Expand/Collapse" icon?

    I am working in CP7 on a project with a Table of Contents that is set to 'Overlay'. The client has requested that I remove the "TOC" button in the playbar, without removing the TOC "Expand/Collapse" icon, so that the user can still hide/reveal the TOC when necessary. The only control I can find is the "Show TOC" checkbox under Project > Table of Contents. However, un-checking this option removes both the "TOC" button AND the "Expand/Collapse" icons. Is it possible to remove just the "TOC" button in the playbar?

    If you are using SWF output you can always edit the playbar in Flash and remove it.
    If HTML5 you can edit the JavaScript out put to remove the button from the playbar.

  • Can we hide or delete the standard BO link that shows up in SAP Inbox & UWL

    Hi,
    Is there a way to hide or delete the standard BO link that shows up in SAP Inbox & UWL ?
    I have already gone through the following threads.
    Objects and attachments in workitems..
    No standard object's link in the workitem
    But, i have this requirement to hide atleast on UWL side the link for the std. BO.
    I am working with ECC 6.0 & E.P 7.0 , SP 10.
    Jocelyn,
    You were mentioning about some UWL XML configuration to hide this in the first thread. Can you elaborate on this please.
    Anybody,
    Any idea on how to achieve this ?
    I really appreciate your immediate reply.
    Regards,
    venu

    Guys,
    Luckily, for this, i was using a user-decision step which uses DECISION --> PROCESS method. So, I could remove the BO:TRIP that i included earlier. But, for other tasks, where if we use a method from our BO, we cannot remove this std. BO link that shows up in "Objects & Attachments"...to my understanding.
    Thanks for all your info on this question.
    venu

  • How can I select and remove the football net behind the goalkeeper with Photoshop CS5?

    Hello,
    Could you please help me with the following case. I have a photo of a football game and I would like to select and remove the football (soccer) net behind the goalkeeper. Do you know what is the procedure for selecting and removing of the net so as to "clear" the goal showing only the goalkeeper in the frame of the goal?
    Thank you in advance,
    Petar
    Product: Photoshop CS5

    Hi Petar,
    You're in luck. Photoshop CS5 was the first version to come with Content Aware Fill. You can use this to seamlessly erase objects, like your net. Try taking a look at this video, which should help you do just that:

  • Is there any way to hide or remove the scroll bars when programming?

    I wish the vi which builded by app builder can display a interface without the scroll bars even before it runs. Thank you very much!

    As was answered here, you can only hide the scoll bars when the VI is running. If you need to enter data or set options before running, then you should redesign the application with a "Go" button or a pop-up and not rely on the user to press the run arrow. Putting the controls inside a while loop would be sufficient and should be easy to do. It's that or live with visible scroll bars.

Maybe you are looking for

  • Gl report requirement

    Hi All , We have a requirement as mentioned below ,could you please help me out , I thought FS10N will help me out but FS10N does not allow company codes with different currencies. requirement : A REPORT NEEDS TO BE DESIGNED TO CAPTURE ALL TRANSACTIO

  • SM13 - Update was terminated - ISU_S_LOYALACC_CHANGE

    Hi, There is custom report for loyalty points calculations. it calculates and saves record in ELACCZ table. When we run report for large numbers of CA, it gives SAPoffice express info - Express document "Update was terminated received" from .. This e

  • Anyway to add PSD files to bundle?

    Is there anyway to add PSD files to bundle? I have a panel for textures that require psd files to execute. Anyone know how I could add these to the zxp file?

  • HT4059 Can I send a recommendation from within iBooks to friend?

    I wanted to recommend a book I'm reading to a friend via email. Seems like a natural function to include but can't do it.  There's a "share" icon in the table of contents view but it's frayed out. What's it for?

  • Add timestamp using variable

    Date stamp was easy to create using a custom format variable, but I cannot see how to do the same for a time stamp.  I would need a time stamp format without colons or slashes that would be rejected as a filename.   Can a custom format Time variable