Can I hold an audio conference call and record it ...

Can I hold an audio conference call and record it on Pretty May Call Recorder?Thanks!

My solution was to store the thread reference. At any step, I can retrieve the current context. This is only valid within a thread, but meets my needs. I could also pass something at a higher level, but that would require knowing which thread I am interested in anyways.

Similar Messages

I pre order an iphone 6 but its on hold it says to call and i tried but it says it can't be located

I pre order an iphone 6 but its on hold it says to call and i tried but it says it can't be located

I'm not sure that answers the question Candice.
I'm in the same situation. I was up trying to get on the Verizon page at 11:55, kept getting the ECPD error. When finally got through, the Silver Iphone Plus 64 showed arrival of 9-19. At every step of the process, it seemed that I was ordering a phone that would arrive on day1. At no point did it say this was an estimate. At no point did it say it might change. In a big yellow box, it said "9-19". Ordered it, then got confirmation email stating it should arrive at 9-19. Seems like all should be good, right? Order site said 9-19, I've got a confirmation email saying 9-19, done and done.
Then I check the website, and suddenly it changed to 10-14?!?!?!? I feel like this was a bait and switch. I was able to pickup an iphone5 in a local store on launch day, and would not have locked myself into a preorder through Verizon if I had known this would happen!
So, that leads back to the original questions. Lets assume I walk into a Verizon store on 9-19, and there is an available iphone6 plus just sitting there, can I either get that phone as fulfillment of my pre-order. Or, cancel my pre-order and buy that phone right then and there?
JJK
PS: It seems there are many people you misled this way. For every person who takes the time to post on this site, there are going to be many many more who are silently ****** off.

How can I set the audio conference to automatically start AS HOST when the meeting starts?

I can easily setup an audio conference for any meeting, and set that conference to start. However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts. This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
The only audio conference provider at my company is The Conferencing Center. I don't seem to have a TCC account. What do I do to get this working? It's nuts to have to use a land line just to get the audio going.

There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
The downside to this is that there will no longer be a dial out option for participants.

How many people can be added to one conference call using verizon?

How many contacts can be used in one conference call?

Thank you, Meg. Appreciate the quick response.
Jim

Can not hear the voice of caller and caller can not listen me

hi
i got iphone 4 can not hear the voice of caller and caller can not hear me while head phone and i pod working perfectly.

You may try using a different headphone to isolate the issue. And test your headphone as well with a different device like an iPod or other device, if it works then it's with the phone, that may needs service

HT5205 I am in Ecuador, I have an A1430 iPad using a 3D micro sim card, when they call me it sounds like busy tut tut tut tut how can I do to receive phone calls and sms

I am in Ecuador, I have an A1430 iPad using a 3D micro sim card, when they call me it sounds like busy tut tut tut tut how can I do to receive phone calls and sms

iPad are not telelphones. They do not receive calls nor do they receive or send SMS messages.

HT201413 after up dating to IOS 6 i can no longer make or recieve calls, and restore won't work. What can I do?

after up dating to IOS 6 i can no longer make or recieve calls, and restore won't work. What can I do?

The iPhone is telling you to connect to computer iTunes because it's in recovery mode.
http://support.apple.com/kb/HT1808

How can I merge conference calls and hang up on one of the instead of both on iOS 8.1.1

How can I merge phone Calls and make conference calls with iOS 8.1.1 and hang up on one instead of both of them , it's not giving me an option like before on iOS 7 ?

The following from the 8.1 user manual (http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf) may help
Create a conference call. While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference.
    Drop one person: Tap next to a person, then tap End.
    Talk privately with one person: Tap , then tap Private next to the person. Tap Merge Calls to resume the conference.
    Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls.

Number of concurrent a/v conference calls, and its bandwidth consumed.

I have two central sites and multiple branch sites. Each central site has one Front End pool. we are planning to replace Lync 2013 servers for hosting meetings, conferences ( audio, video and web)
My manager wants to know the number of concurrent audio/Video conference calls that our Lync Front End pools can handle and the bandwidth consumed by these calls. Can anyone here help with this or point me to where to find the right tool. I have tried using
Bandwidth calculator, it was not working well for me.

For Audio, assuming G722 (without FEC) it will be about 96Kbps per stream. So in theory that would be
over 1000 calls on 100Mb, however that doesn't take into account any other traffic that would be on the link.
For H.264 Video it can be anywhere up to 4000Kbps (HD), but it's unlikely that all your end points would be running 1920x1080 resolution and they will all negotiate differently. So without knowing a lot about your environment I would say on average (which
is just that between min to max around 50 video streams) or 128-250 streams at lower resolutions - so traffic through phones and slow connections (320x180-16:9/ 212x160-4:3 to 640x360-16:9/640x480-4:3) and
25-50 streams at the higher resolutions. So HD cameras and rooms systems, etc. Once again not taking into account other things on the network.
With regards to the pool themselves, follow the hardware specifications required which you can check using the capacity planning tool http://www.microsoft.com/en-us/download/details.aspx?id=36828 the
supported maximum however for a large conference on a single pool is 250 participants.
As I mentioned it's almost impossible to give definitive numbers because there are so many variables, but hopefully this helps a little.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

Conference call and get disconnect tone

Hi,
I had a issues as below:-
Now have 5 party in conference call, 2 from internal and 3 call to PSTN's user. Suddenly one of the PSTN user call are drop then the remaining user in conference call are hearding the disconnect tone for few minutes. May I know how to shorted the disconnect tone or totally no disconnect tone after the PSTN user disconnect? Please let me know how to solved this.
I using CUCM 6.1 and conference station 7936.
Thank you.

Hey! Most likely it is an engineering issue, should be fixed soon with the newest update.
Check this related thread: How to add caller to Facetime audio call in ios8?

Conference call and number of attendees

Hi
How many participants can join conference . Does it matter no of participant if phone using sccp .
each phone can only have two audio legs up at a time
What does the above statement means
Thanks

HI,
Messages beta (and therefore Messages in Mountain Lion) can do all the things iChat can do.
Messages Beta adds an "Account" (But not a Buddy List) that allows you to use any Apple ID to be linked to your iMessages Account.
iMessages allow you to send messages to your iPhone or iPad or rather to other people's using either thier Apple ID or their iPhone Number and for the messages to sync across all your devices.
i.e. you can link your Apple ID to your iPhone Number and use the Apple ID on an iPad and in Message (beta) as well as the iPhone and messages will be synced.
Another way to say this is that iMessages have been added to iChat and that the basic iChat Engine remains as the main component.
8:34 PM Sunday; July 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I still can't be on a phone call and use data without wifi on my Droid Turbo. I thought this was going to be fixed by late November.

I am so disappointed. I am a long time Droid user and research the Droid Turbo for several months before purchasing. I even read the reviews that indicated that there was a issue when attempting to use the phone calling feature and data at the same time. I called Verizon and talked with a rep. who indicated that he had the new phone and assured me that this issue had been fixed. Unfortunately, when I received the phone this was not the case. Even an update shortly after purchase still did not fix this issue. All of my Droids before this did not have this issue...how can a newer more improved phone? I even called Motorola and the English of the representative was so bad that I could not overcome the language barrier therefore no solution was reached. Wish I had my Razr HD back :{

I can understand the concern CCONLEY. Go to Settings>Advanced Calling> and select Activate Advanced Calling or contact Customer Service to get the features added. Once added Reboot device and go back to Setting>Advanced Calling>and ensure the Advanced Calling switch is set to On. Ensure you are in a 4G LTE service area and test again. If there is still an issue, please let us know so we can forward your findings to the software team. TamaraH_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I have a Zune. Can I transfer my audio books, music, and pics to a iPod? How?

I have a Zune. I want to buy an iPod. Can I transfer all my audio books, music, and pictures onto the iPod and if so how?

For the music and audio books it depends upon where they came from. If they have DRM protection and the DRM is not compatible with the iPod/iTunes then you are out of luck. Audible.com audio are compatible with iTunes/iPod and you just add them to the Books library of iTunes. Music, if compatible, is just added to the iTunes Music library. Phots will sync just fine to the iPod. See:
iPhone, iPad and iPod touch: Syncing photos via iTunes

Brand New Iphone 4 - can not hear when on a call and they can't hear me!!!

Please Help. I got an Iphone4 2 hours ago. Tried to make my first call and i hear nothing. I can see they have picked up but they can't hear me and i can't hear them!! Help!!
Thanks

Sometimes when I make a call, the other persons phone rings, they answer and they can hear me, yet I hear nothing, not even the dial tone, the other day I tried calling my husband 4 times and everytime his phone rang, he answered and could hear me cursing about the phone yet I heard nothing

How many phone lines can i add to my conference calling feature.

How many phone lines can I add to conference calling on my iPhone?

That depends on your cellular carrier. Ask them.

Can I hold an audio conference call and record it ...

Similar Messages

Maybe you are looking for