Can i Host the KMS Server in the Server which is a KMS client of other KMS Server

Hi,
Is it Possiblei can Host the KMS Server in the Server(2012 R2) which is a KMS client of other KMS Server..?
If yes ... Do i need to do any special configuration for that or normal Host configuration is enough..?
Thanks
Balaji K

Hi Sir,
"The KMS service does not require a dedicated server. The KMS service can be co-hosted with other services, such as Active Directory® Domain Services (AD DS) domain controllers and read-only domain controllers (RODCs).
KMS hosts can also run on physical computers or virtual machines that are running any supported Windows operating system, including Windows Server 2003. Although a KMS host that is running Windows Server 2008 R2 can activate any Windows operating
system that supports Volume Activation, a KMS host that is running Windows 7 can activate only computers running Windows 7 and Windows Vista."
Based on this ,it should work .
If you want to activate a windows server please enable KMS on a server .
"By default, client computers connect to the KMS host for activation by using anonymous RPCs through TCP port 1688. (You can change the default port.) After establishing a TCP session with the KMS host, the client sends a single request packet.
The KMS host responds with the activation count. If the count meets or exceeds the activation threshold for that operating system, the client is activated and the session is closed. The KMS client uses this same process for renewal requests. The communication
each way is 250 bytes."
https://technet.microsoft.com/en-us/library/ff793434.aspx
Also you can change it if that port is used by other service :
https://technet.microsoft.com/en-us/library/ff793407.aspx?f=255&MSPPError=-2147217396
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

How can i host my own website through the server?

Hello,
I am very new to the server and I bought it specifacally because I thought I could host my own website and not have to go through something like godaddy.
How can I do this with the Mac OSX Lion Server? Have a domain name and publish it through something like iWeb?

you will need a static ip address that either points to the server with port forwarding or is on its nic card. You then have to set up your dns entries and point your domain name to your dns server. You can then turn on web services.

Best option for hosting forms online and archiving the completed forms?

Forgive the length of this post, but I feel it necessary to give a little background information into our problem.
We were looking for a simple solution to a seemingly simple problem: Host ~15 safety forms online for field technicians (electricians) to fill out via their netbooks and submit to some sort of repository for archiving with the ability for the technicians to reopen the forms and make additions over the course of the job / week as well as firing an email off to our H&S rep per form submitted.
Acrobat + Remote Desktop Services (SBS 2011 network) + Reader seemed like a good solution and does work, but it's somewhat cumbersome for the less computer literate techs and proving to be more time in support then we are potentially saving going with paperless forms. This is the system we have in place now.
We initially purchased Acrobat Standard and subsequently upgraded to Professional when we found some limitations we weren't expecting in Acrobat Standard. An Adobe Sales rep also suggested that we check out Livecycle Designer 9, which was included with Acrobat Pro which included even more nice stuff. I started re-authoring the forms in LCD9.
The issue now is that I have Dynamic XML forms with flowed content that cannot be submitted by Reader to sharepoint. Why? You can't reader extend livecycle forms with acrobat, which it is bundled with.....
Why exactly adobe has two different and somewhat incompatible forms authoring tools bundled in the same product is beyond me, especially when one of them requires what I would imagine is an expensive server product to enable it's full use?
So it seems I have a choice between having my employer purchase Reader Extensions ES2 to maintain the nice form design with flowed content, purchasing 12 copies of acrobat to put on the netbooks when Reader SHOULD be all that we need or converting all the dynamic XML forms authored in LCD9 into static AcroForms so they can be reader extended and deployed to sharepoint.
We envision our technicians browsing to and logging in to our hosted sharepoint server, selecting the appropriate form template from a drop down list in a doc library or list, which opens the form for completion in the browser and on submit posts the form to a list on sharepoint for completed forms, preferably with some key fields mapped to custom columns in said list AND with the ability for the submitting technician to re-open the submitted form from sharepoint and make additions as the week / job progresses.
What would be the best option given our current situation and needs? With all due respect, I am looking for suggestions from technically oriented or experienced persons, not sales reps that don't fully know the product.

Ok, so I have done some additional reading and I've found out that Livecycle forms can be submitted via reader without reader extensions so long as the submit is via HTTP Post or as XML data only.
This effectively means you can collect the data from the submitted forms for processing, but you can not re-render the form from the form template and the XML without the presumably expensive server component, Reader Extensions, which for all I know, requires other components to run.
This all seems awfully expensive for a solution to host a dozen or so forms and archive the submissions in one place where they can be re-opened and added to.
I don't undestand why it's so prohibitively expensive to submit dynamic PDF forms as PDF vs submitting static PDF forms as PDF, which can be done with Acrobat Pro all by itself at ~$500.

Getting the domain name of the Client PC using WebUtil

Hi Guys,
Is there a way I can find the domain name of the computer running the forms using webutil.
I use WEBUTIL_CLIENTINFO.GET_HOST_NAME to get the client computer name. I would also need the domain name.
Thanks!
Anand

Try this:
message(CLIENT_WIN_API_ENVIRONMENT.GET_ENVIRONMENT_STRING('USERDOMAIN'));I believe if no domain is defined, it will return the host name. Also, this obviously will only work on Windows clients.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

Activating MS Office 2013 ProPlus via KMS running on the same server

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

I have a mac mini server with leopard, macbook pro, imac and iphone 4 i would like to use the server as the host for all mail, contacts, directories, intranet etc i would like all devices to have mail pushed using outlook as the prefered mail client?

can anyone shed some light on how to do this i am currently using the server as a file storage system but feel it can deliver far more; ideally i would like the following;
email to push to all devices once sent form one device all devices have a copy of the sent item
accounting software that is shared on the server
access the files and directories securely form anywhere
create and host an intranet site
any ideas of how to setup easily or step by step guides
help would be greatly appreciated
regards
rd

Start by getting DNS properly configured. If DNS isn't properly configured, most other services won't work right.
http://labs.hoffmanlabs.com/node/1436
http://labs.hoffmanlabs.com/node/1594
Then, the OS X server documentation will provide a wealth of knowledge on configuring services.
http://www.apple.com/server/macosx/resources/documentation.html

The grace period for the Remote Desktop Session Host server has expired

<p>I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me please

Hello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

New M5000 server - Can't get bge0 to work in the OS

Just recently powered up a new M5000 server. Went through the setup process of setting the networking details of the management card - which I believe also works through ethernet0 (LAN#0). That is working just fine and is what I have used to access the system console. Single domain, nothing odd in the configuration.
The pre-installed Solaris sees bge0 and bge1. It also shows the ppp connection for the dscp.
if config shows a normal adapter config but without the RUNNING flag. cfgadm shows the drivers properly loaded. There are cables connected to both NIC cards. The same result, btw, on the bge1 card. The NIC's show activity LED's so there is definitely a physical connection there.
What else can I provide to get assist anyone in helping me solve this problem?
Thanks
Norm Dressler

Hi all, I'm new to the forum
Have installed the above mentioned server running the x86 platform with Solaris 10 1/08 with broadcom ethernet adaptor cards.
My network connections are giving issues. bge0 and bge1both show physical activity and these are my configs
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.170 netmask ffffff00 broadcast 192.168.1.255
ether 0:11:25:22:1f:26
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.0.0.1 netmask ffffff00 broadcast 10.255.255.255
ether 0:11:25:22:1f:27
My default router also exists
# vi /etc/defaultrouter
192.168.1.254
~
The hosts file
# vi /etc/hosts
::1          localhost
127.0.0.1 localhost
192.168.1.170 hostname1      loghost
10.0.0.1      hostname1
~
~
And the device files
# vi /etc/hostname.bge0
hostname1
~
~
# vi /etc/hostname.bge1
hostname2
~
~
All these including restart procedures aren't working.
I dont seem to be able to get to other devices on the network yet the local TCP/IP stack behaves just OK. I can ping all the interfaces but cannot ping any device on the network.
During install too, I attempted to acquire a dhcp address via the network from a dhcp server that serves IPs to our network but failed thus proceeded to static addressing.
Any advice please?

An FTP Error occured - cannot make connection to host. No response from the server

"An FTP Error occured - cannot make connection to host. No response from the server".
As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
See if the 'timeout' issue could be at play here:
http://forums.adobe.com/message/708941#708941

Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

Need to host a Chat Server on the web

Hi,
I've created a simple chat application, but the server I created needs to be run on a machine, its got the main method in it.
The client side is working fine, I've packaged it up as a jar file and got it signed so that i can use it as an applet on my website.
The problem is that the server needs to be running 24/7 in order for it to accept connections from clients, but I want to put everything on a web hosting site, is there anyway I can do this?
Thanks
Message was edited by:
Mozy420
Mozy420

Yes, you can. But it depends on your agreement with the hosting provider.
Basic service - not likely, you're too cheap!
Shared Host - most, you're in business.
Dedicated - 100% it's yours!
Your chat app will need to open port(s) on the host, and most providers only allow that from shared or dedicated accounts. For those, you will be paying more - that's how they make their moola.

Can I open a port range in the firewall for one host?

Can I open a port range in the firewall for one host? In other words, I want to be able to open ports 54001 to 54050 to allow one remote host in my LAN to access that port range in my Mac Server. Is this possible? Currently, the only option I see is to open individual ports for all external hosts (eg http or https)
Thanks in advance!

Which version of OS X Server are you using?
Server 2.2 and earlier includes an interface to a software firewall that can be configured to open specific ports very easily. Descriptions of how to configure the firewall can be found in the documentation for these versions.
Server 3.x no longer has an interface to the software firewall - it is still there, but you need to use other methods do configure it. A popular example of such a method is the icefloor utility.
Apple suggest that for Server 3 you delegate firewall duties to an external router. Server 3 includes the ability to configure the firewall component of Apple Airport routers 'automatically'
if you connect a machine running Server 3 directly to an Airport Router the router appears in the LH pane in the Server.app window (usually second line, below the entry for the server itself), and you can control what services are 'enabled' through the firewall there.
a more common solution perhaps is to use a non-apple router, and configure the firewall (and so open specific ports) through whatever control interface is provided for that router. There are many many kinds of hardware router you could use, and the control interfaces used vary widely - so you will have to consulting the documentation for your own router to work out how to do this.
If you post information about your software versions, and hardware configuration, it is possible that you can get more specific help with the tasks involved in opening the ports.
Hope this helps.

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Can i Host the KMS Server in the Server which is a KMS client of other KMS Server

Similar Messages

Maybe you are looking for