Can I import a Final Cut Pro X project back into Final Cut 7?

I want to go back to Final Cut 7 (Studio '09) from Final Cut Pro X, but I've already started work in Final Cut Pro X, and I'm worried that my FCP X timelines won't open in FCP 7. Does anyone know?

big no on that one Im afraid, at some point in the future FCPX may export xml but not yet, your project (timeline) is pretty much quarantined inside FCPX, I'd bite the bullet and finish it there if I were you
cheers
Andy

Similar Messages

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Can I import .MTS files from an external hard drive into Final Cut Pro X?

Luis Sequeira1 wrote:
b) Use an utility like Clipwrap or MPEG Streamclip to convert the mts file to a quicktime (mov) file
Luis,
Just to clarify one point…in order for Streamclip to convert the MTS I believe a plug-in like the AVCCAM QuickTime importer from Panasonic needs to be installed. (Credit David McClain over at the FCS boards for that info.)
Russ

Can you import video from dvcam using a dsr 2000 into final cut pro 10?

Can you bring video from a DVCam tape using a DSR 2000 into Final Cut Pro?

Should work OK with the iLink (a.k.a. Firewire a.k.a. IEE1394a) interface, but you may have to capture using iMovie, then ( in FCX) running File > Import > iMovie Events.)

Final Cut Pro to Motion - Back to Final Cut Pro

When I import back to fcp I now have black bars on the side of my import footage.
Am I not using the correct setting in Motion? Please advise or let me know if I need to provide more information. I am very new to this process and any help is appreciated. Thank you.

sounds like your settings in motion are incorrect re frame size.
if I were using motion to do things I would view "fields" and use field rendering of any project then import the rendered quicktime out of motion and drop that in my FCP sequence. If changes are needed i reopen motion fix the offending parts and output again. FCP renders frames and sometimes panning and zooming can stutter when frame rendered.

Importing fcpx project back into fcpx and having trouble

Please Help Me.
So I shared a project from Final Cut Pro X to my desktop so that it was the "Title" - Mac and PC.mp4 file. Then I put the project and all the event files onto an external hard drive and deleted the project and the event files from my computer. Since I did that, the mp4 files disappeared, and now I'm trying to retrieve it, so I plugged in my external hard drive to my computer, and tried to get the project back into Final Cut so I could export it properly this time. But although the project imports back into FCPX, it says all the files are missing. I'm trying to put the event files back into FCPX as well, but it doesn't seem to be synching with the project and now I'm scared that I'll either never be able to have this video again or I'll have to do a serious amount of manual re-editing to retrieve it. It seems that if I have the project file and all the original video files from each event, why would it not be able to be retrieved? Is there something I'm doing wrong or some other way I can retrieve this project and/or get my mp4 file back? Should I be putting the event files in a specific place? Please someone, anyone, help me and let me know if you have any useful advice asap.
Thank you.

here are the warning signs I get when trying to format......
Warning: The directory ‘/private/tmp/501’ will not be included in the final disc.
Warning: The file ‘objcsharing_ppc4294967294’ found in the VIDEO_TS folder will not be included in the final disc.
Warning: The file ‘objcsharing_ppc501’ found in the VIDEO_TS folder will not be included in the final disc.
Warning: The file ‘objcsharing_ppc92’ found in the VIDEO_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS folder will not be included in the final disc.
Warning: The file ‘WESLEY_GROUPS.layout’ found in the VIDEO_TS folder will not be included in the final disc.

How can i import old projects (Final Cut Pro 10) to the new (final cut pro 10.1.1)?

Hi everyone,
I have a folder full of backup projects and events of Final Cut Pro X.
Now, I have Final Cut Pro 10.1.1 and I don't know how to use those projects, since they were in a different folder.
Yhanks very much
Bruno

I'm assuming these are on a secondary drive. At the drive's root level make folders called Final Cut Projects and Final Cut Events. Move the projects and events you want to work with into those folders. In FCP use File>Update projects and events. Select the drive you want to update and FCP will update the projects and events in those folders. Save the originals as backups.

Error sending multi-track project back to Final Cut Pro, can't open XML

I am an experienced Final Cut Pro user but just tried using Soundtrack Pro for the first time on a real project. I sent the audio from my Final Cut sequence to a Soundtrack Pro multi-track project, added a few effects and created some fade-ins and fade-outs, and then tried to Export back to Final Cut.
I selected "File > Export", named my file and selected "After Export > Send files to Final Cut Pro sequence."
Now in Final Cut an error appears that says "The document “Name.xml” could not be opened. Final Cut Pro cannot open files in the “Final Cut Pro XML File” format."
Am I crazy or is something wrong happening here? I can get the exported audio files to appear in my sequence if I select "File > Import > XML" in Final Cut, but after this whole process Final Cut seems to be functioning unreliably (after closing Final Cut and re-opening, I even once got a similar error that said "Final Cut cannot open files in the Final Cut Pro Project File format", which is obviously crazy).
Am I doing something wrong? Any advice would be greatly appreciated.

hi,
i have the same situation. expirienced in fcp, new in soundtrack pro.
similar message. did you find an solution ?

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove wires/rig? Are there any rig removal plugins for final cut pro? Thanks!

I need to remove a rig/wires from my final cut pro 7 project. Can Apple Motion 4 remove them? If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them. Thanks!!

In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this. But I don't know anything in Motion 4 that will do it. You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

Canon hfs20 1080 50i vs 25PF Final Cut Pro X Project settings

I apologise in advance if this is a newbie frustrating question....
But I have been searching and reading....and reading....and just cant seem to work it out.
I have a Canon hfs 20 legria (PAL version) camera.
I have purchased Final Cut Pro X.
The camera highest quality settings are 1080 50i or 1080 25pf.
Now, I think I understand the difference between interlaced and progressive (did some reading on the net).
What confuses me, is when I import the footage from the camera...into final cut pro X
I shot some footage at 1080 50i. ( it is intended to be used as a music video, eventually)
When I imported the footage into FCPX i let it set the project properties, taking it from the footage shot.
Expecting the project would set itself, to 1080i 50i.
I check the project properties, and they say its 1920 X 1080i 25i ( now from my reading, i assumed if it was gonna set 25 anything, it would have been 25p)
I then copied the project, and manually set its settings, to 1920 X 1080p 25p
When I play either project, and look at them in the viewer, I cant see a difference. (Now that is probably attributed to the fact that I am a newbie and dont know what I am looking for in the first place)
Now, also during my searching, I came across a plethora of people, selling coversion software, for the canon hfs20 to get it into FCP. Now I cant tell if this was prior to FCPX , and now FCPX handles my cameras footage. To be honest, from what I had read, I kinda didnt expect my footage to import, and was pleasantly surprised when it did.
So, on to my questions, you say...8)
My cameras highest quality settings, are 1080 50i or 1080 25p
I wish to get the best footage I can, and have it set so it works well with FCP X.
I dont shoot, sports, hummingbirds etc...its mainly me, sitting playing the guitar, long walks on the beach, looking longingly into the distance...8)
Which settings would work best, and what should my project be set at , in FCPX to deal with those settings.
Final delivery, will be, internet, Beta tape for TV broadcast, possibly DVD but that is a distant 3rd.
Look, I know this is probably a frustrating question, but I would really love some help. Audio, i get, Video makes my head spin..8)
thanks in advance
Wiz

Hi Tom
and thank you very much for your reply.
Okay, I will shoot in 25FP from now on...8).
I also made the change to the viewer settings, though I cant find anything in the online help manual about what it is or what it does...
thanks mate
cheers
Wiz

How to rename folder in Final Cut Pro X project library?

How to rename folder in Final Cut Pro X project library? I can't double click on folder, when I right click it just gives options to erase. Can someone help?

I think you may have misunderstood - the question is regarding renaming a project "folder", not a project name.
Still, the accepted answer here makes no sense to me at all - it's about renaming an event. So we're all confused ;-)
BTW as of 10.0.5, I still cannot rename a project folder while background tasks are running - no clue is given that this is what's going on, second-clicking on the folder just (frustratingly) does nothing. When background tasks finish, it works again.

Will the new final cut pro x work with my Final cut pro version 6.0.6 data

will the new final cut pro x work with my Final cut pro version 6.0.6 data

Thanks Tom.
So I will need upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
Roger

I am not able to share final cut pro x project to iTunes. it continues to say waiting.

I have not been successful in sharing a final cut Pro X project to itunes. It says waiting.   I can cancel it, of which I have canceled about ten submissions now, but each time it says waiting. What am I doing wrong here?

I am not running a compressor.   I am running the 30 trial version of Final Cut Pro X. I have created and finished a project.
I am running a brand new iMac with the latest OS version.    First I a highlight the project to share. I assume just by clicking on it.   click share - apple devices - then i select for which machine, (imac) i want it to render it for-select add to itunes- and click share.
Then it opens up the share monitor shows the project in question and says waiting. I can pause it, cancel it but I can not get it past waiting. the time registry under the info selection says 0.00 minutes but still waiting..
I am selecting the project correctly?   I have made only one project.

HT3775 I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Export Final Cut Pro 7 project to open in FCP 6?

Is there any way to open a final cut pro 7 project in final cut 6?
We have a bunch of older Macs that won't run FCP7, but we use for training but our hope was to upgrade the newer machines to the new Final Cut Studio, but it would be great if we could create something on the newer machines, that we could transfer to the older ones.
We tried XML export, but it didn't look like it included filters and such, so we are wondering if there is any other way?
Regards,
Karl M. Moberg

Nope. no other way.
Shane

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

Can I import a Final Cut Pro X project back into Final Cut 7?

Similar Messages

Maybe you are looking for