Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

Similar Messages

Can i transfer a project from premiere elements 13 to premiere elements 12?

i am working on a project in a free trial of premiere elements 13. i am going to buy premiere eements 12. will i be able to open my project from premiere elements 13 in premiere elements 12?

mefe
It has been the case that you cannot open a Premiere Elements project file (.prel) created in a later version in an earlier version.
And, you cannot open a Premiere Elements Windows project file in Premiere Elements Mac and vice versa.
ATR

Can't export MP3 audio from Premiere Elements 9

I want to export the audio from my movie. The File, Export option appears to be unavailable, regardless of what I do; I saw elsewhere on the forum that all exporting is now done through the Share tab, and referring to PE8, the post recommended the "share to computer" tab. Under advanced options, I set the audio to be exported as an MP3, with no video. However, the "advanced" button leads to a screen with 3 tabs: "Format," "Video," and "Audio." I can make those changes under the "Audio" tab with no problem, and because I have chosen to export only the audio, there is no information under the "video" tab. The problem is that the "Format" tab only gives me two options, ".flv" and ".fl4" or something like that, and the resulting file appears to be a 7 second long, blank and silent video, played by Windows Live Movie Maker. How can I get my audio exported?

Are you using version 8 or version 9? It's hard to tell because you reference both.
In version 9, if you go to the Share tab and select the Computer option, you'll be taken to a screen with seven output options.
Audio wil be listed as your last option. (You do have to click on the Audio listing to select it.) and MP3s are certainly among the options listed on the Preset menu.
If you can't see it, you need to scroll down or resize your panels -- or your computer monitor may not be large enough. But it's there.

HELP I can't import my photos from my Cannon to the Cannon app on my imac on Snow Leopard!

HELP - I just installed Snow Leopard & though I've uploaded photos from my Cannon Power Shot A590, since then ... But today while it opened the Cannon "Camera WIndow" & looks like the photos are being uploaded, an iMac box appears showing a: "failed to initialize program" message!!! Why
I've tried several times & can't import my latest photos from my Cannon to the Cannon app on my iMac, it doesn't recognize it? (I look at them there & often delete photos from the camera, then I import them to iPhoto.)
I've had a number of problems with Snow Leopard - in iPhoto, iWork, etc, since installing it. What gives?

I would also suggest that you check out iPhoto or Image Capture - both already in the Applications folder on your Mac - which should be heaps better than the Canon software. And, for what it's worth, you actually do not need any software to get pics onto your Mac - if you have your preferences set to display external drives on your desktop, the Canon icon should show up as soon as you plug it in. You can simply double click the icon and then look at the pics with Preview to decide if you want to keep or ditch it.
And the problems with your SL install most likely are the result of other apps not being up to date or compatible with SL - that happens every time. You need to check on compatibility of all the apps you have to you'll know what needs to be updated.

How can I import my iphotos from one account to the other?

Someone knows step by step iphoto from one account to the other. I am admin but still I do not know how to bring my iphotos to a different account
thanks for help
marc

Just the Photos?
Export them from iPhoto to a folder on the desktop
Put that folder in the Users/Shared folder.
Switch User.
Drag the folder from the Shared folder to whereever you want it.
Share the Library?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder (but note: some users find ongoing permissions issues with the Library in this location. It might be better to use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

Can I import a catalogue from Photoshop Elements to Photoshop CS5

I have 5000 photos organised in catalogues in my old Elements and have just upgraded to Photoshop CS5 Extended edition running under Windows 7 64 bit. Is it possible to import my existing catalogues into CS5 or do I need to recreate them all again?

Probably not... most DVR makers code to the hard drive in a proprietary format that will not work in any other DVR
You may be able to PLAY the video out to an external recording device, such as a VCR or a DVD recorder
Or, for a computer, you may be able to use a converter such as at http://www.grassvalley.com/products/converters

Can't import big files from my camera to the laptop

hey guys.
i take movies with my digital camera, and so far all the movies shorter than 3 minutes long import without a problem, but anything above 5 minutes just refuses to get imported into iphoto. the "importing screen" will show, but after a long time it will just end and the movie will stay in the camera.
because i can't "see" the camera in Finder, there's no way to access the long movie files on the macbook.
anyone have any ideas?
thanks.
Ronny.

well one way of taking out the large file is to read the camera like a hard drive, and mounting it to the desktop. this is done by changing the transfer settings in the camera itself, so that it reads like a SD card reader.

I can't import any files from itunes... the click and drag isn't working...

I've tried clicking and dragging my mp3 from the desktop, from the finder, and straight from itunes, but i can't get it to be in garageband... at all...
I feel like i'm doing the same thing i was doing even just earlier today, but it isn't working anymore...

Is your mp3 maybe called .MP3? Then try to change it to lowercase.

How can I import my playlist from a nano and an iphone 3 into itunes?

I have playlists on an ipod nano and an old iphone 3 that are slightly different and no longer on my hard drive that was wiped by Best Buy during a repair.
My ipod is 'enabled for disk use' but import a playlist doesn't seem to work correctly.
Help?

There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
There are also these guides:
How to move music between authorised computers
Networking with a Windows PC

Import photo's from IPhoto while keeping the created albums alive?

Can I import photo's from IPhoto while keeping the created albums alive?

Can I import photo's from IPhoto while keeping the created albums alive?

Premiere 6.02 - can't import video clips from a different editing program

If anyone has an answer I would really appreciate it. I am using Premiere 6.02 and XP. I have a 80 GB hard drive, 256 mb ram, and 1.7ghz. I have about 9 minutes of footage that I captured on MGI's videowave 4, which came bundled with my computer from Dell. It seems that I have to import the entire 9 minute clip from videowave into premiere to be able to edit it with premiere. I have been able to carefully make a few very broad edits of this 9 minutes in my premiere timeline, however, everytime I try to open it up I can't even make a single move before premiere is not responding and it has to close down. Is there anyway around this so I can utilize this 9 minutes by adding audio tracks, fades, and specific cuts? I have to be able to use this footage. Any suggestions would be great. Also, are there any chat rooms that exist where people discuss troubleshooting issues with premiere? Thanks for taking the time to read this.
Ryan
[email protected]

Thanks for the help. I'm in a bit of a tough situation right now.Again I have xp with 1.7 ghz, 256 mb ram, and 2 hard drives ( 40 gb and 80gb) with approx. 75 gigs free space. I'm trying to save about 12 minutes offootage that i captured with videowave 4 from being totally useless. I know you suggested to me that i convert from avi 1 files (videowave) to avi 2files (the only files premiere 6.0 accept apparently). I haven't been able to find anywhere online that has the software to do that with. My other alternative, considering the original footage on my camera has long since been erased, is to export from videowave to my camera and then import that footage into premiere and then i would be set. I wish I could. I couldn't get videowave to recognize how to "produce video" so I uninstalled and reinstalled. Now I am able to get all the way to the point where I'm simply supposed to choose "output to dv" under the output menu. When I click the dropdown menu the only option available is "full screen", which I tried anyway. It does play the footage on full screen, but it certainly doesn't capture the footage to my camera. I've looked everywhere on the videowave web site and their solutions are brief, difficult to understand, and inconclusive. Oh, something that sounds like a problem is when I reinstalled videowave it said something about missing a indeo codec. I looked for it in my video codec properties and found a couple of versions,but what I gathered from online research was that I might need indeo codec xp 5.2 (seeing as how I'm running xp) which costs $15. I thenlooked onlineto find that codec for free somewhere to no avail. HELP!!!! THANKS!!
RYAN

Can I Create a Custom Menu In Premiere Elements 12?

It's great that Elements 12 has a way to automate menus for a DVD, but so far I can't find one I like. Specifically I want a picture background to fill up the whole screen, just like I can do with a title. Maybe my question should be can I turn a title into a menu by adding markers?
And a related question is do I have to have a main menu and a separate scene selection menu? I am used to creating menus (with Pinnacle) that allow just one menu screen and buttons that can be added (and the "button" can be text or a picture).
Now I'm getting ahead of myself but if I have a scene menu and someone selects a scene, at the end of the scene will it just continue playing or return to the scene menu? It's an option in Pinnacle. I'm hopping it is in Premiere as well because once the scene is done I would rather have it continue to play on like commercial DVDs would if you jumped to a scene in the middle of the movie to continue watching.
Thanks for any comments.
Rick

Rick
The disc menus come as a set of main menu page and scene page.
The main menu page has buttons for Play All and Scenes Selection (to get to the scene menu page if the viewer does not want Play All.
The scene menu page has buttons for the Scenes for the viewer to select what to view first. But, remember that after the viewer watches the selected scene, the viewer in not going to be taken back to the main menu unless he/she selected the last scene to watch.
The number and sequence of the scenes in the scene menu page will be directed by where you place the
menu markers on the Timeline content. The main action for disc menu set up is going to be in Tools Menu/Movie Menu/Movie Maker Customization.
The main menu page comes with a designed in number of buttons. So does the scene menu page.
a. main menu markers on the Timeline to place main menu buttons
b. scene menu markers on the Timeline to place scene menu buttons.
Now here is the consideration. If the number of scene markers on the Timeline exceeds the number of designed in button for the scene menu, then the excess spills over to additional pages. Same situation for the main menu and main menu markers.
Example...if you have 6 scene markers placed on the Timeline and you use a menu with a scene menu with only 4 spots for buttons, then you are going to end up with 2 scene menus, the first with 4 buttons/page and the second with 2 on the page. In the end
a. 1 main menu...Play All Button and Scene Selection Button
b. 2 scene menus....lst with 4 buttons
Let us try this. Go back to my blog posts and see if the introduction in any of them describes what you want to do.
If one looks promising, then we can go step by step through the how to provide for smoother sailing through the details. The details may look better on the second read.
Based on all that I will see if I can customize something beyond which I have already written about.
Right now for practice look at 8 Timeline scene markers for the Memories/Memory Box theme which should give you
1 main menu page with a spot to insert a picture
2 scene menus page (each with 4 buttons per page)
ATR
Note: If all your scene markers appear to have similar scenes, make sure you have put a few frames distance between menu makers.
Also, in the Marker's dialog, use the Offset to move the view a little. This will not affect the position of the marker on the Timeline, just the
view of what you are seeing in the scene thumbnail.
We can get rid of thumbnails but it will take us into the theme's psd editing in Photoshop CS or higher or depending on the circumstances
Photoshop Elements.

How can I export a completed project from Premiere Elements?

There are a number of formats you can export from Premiere Elements. All are available under the Share tab and the major output formats are available under the Personal Computer option.
To export your completed video for use in another project, use the DV-AVI output option.
To export your video for display on the internet, use the WMV or MOV output options.

I experienced the same problem as mreingrover. The Share features of iMovie appear to be completely unimplemented.
I had had MacKeeper installed for a short while on my previous Mac; never on my new MacBook Pro. I could not find any trace of it in Application Support, Launch Daemons, or LaunchAgents, in either my user Library or the root Library. But I figured maybe there was some trace somewhere that had been copied over from the old system, so I deleted iMovie and went to reinstall it from the App Store.
Now the App Store wants $14.95 for an app that has never worked right, and which is (I think) supposed to be free with my new MacBook Pro Retina.

Moving menu template from premiere elements 4 to premiere elements 9

Last year I upgraded from premiere elements 4 to 9. I could not find a generic menu template in premiere elements 9 so I moved one from the program files of premiere elements 4 to the program files of premiere elements 9. This seemed to work okay except that the background art that I used for the main menu does not show up on the burned DVD even though it is there when viewing the project. I'm using a PC with Windows 7. Any suggestions would be greatly appreciated.

Several of the menu templates for PRE9 had problems, such as custom backgrounds ignored. A. T. Romano did a lot of work on investigating these issues.
For example:
Premiere Elements 9 Disc Menu (main/scene)
PE9 Menu background
It seems likely that whatever caused the faults in PRE9 is also tripping up with your PRE4 template. Others have reported that the problems were fixed in PRE10.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Can't upload from premiere elements to youtube

I'm trying to upload a 25 minute video to youtube. It says the following: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of the video and try again."
youtube supports videos of this size now. How can I get past this? Thanks!

Thanks A.T. So far the default setting are working just fine, but this is good info in case that changes.Jan
From: A.T. Romano <[email protected]>
To: Janice Yuvan <[email protected]>
Sent: Saturday, May 2, 2015 11:30 AM
Subject: can't upload from premiere elements to youtube
can't upload from premiere elements to youtube
created by A.T. Romano in Premiere Elements - View the full discussionjanicey For your workaround, you have been pointed to Publish+Share/Computer/AVCHD with Presets = YouTube Widescreen HD.The default for that preset is 1280 x 720 @ 24 progressive frames per second with a bitrate of 8 Mbps (megabits per second). If you want other than that default setting, you can customize that preset to 1920 x 1080 @ 29.97 or 25 progressive frames as well under the Advanced Button Video tab of the preset. Determine if the bitrate needs adjustment and the file size is acceptable You might also want to explore using Presets = MP4 - H.264 1920 x 1080p30 (or 25 as appropriate) and customize the preset under the Advanced Button/Video Tab of the preset. Watch the file size. If you are OK with the 1280 x 720 for quality and file size, then please disregard the suggestion for this. If you are interested in the suggestion, do not hesitate to ask questions or ask for clarification if needed. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505552#7505552 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505552#7505552 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Similar Messages

Maybe you are looking for