Can I import a request in 3.5 to 7.0
Hi Guru's,
<b>Whether it is possible to import a request in 3.5 server to 7.0 server....</b>
I'll assign the full points.
Regards
Manoj
hi manoj,
yes, it is possible...
to get some idea regarding this, use the links...
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
with regards,
Raja Singh
Similar Messages
-
Importing transport request bypassing quality system
HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul SHi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V -
How can I import a change request to a system which is not in the domain
how can I import a change request into a system which is not part of the transport domain?
Hi,
You can transport any requests to any systems even though they are not in the transport domain.
1) Move the corresponding data & cofiles( in /usr/sap/trans/data & /usr/sap/trans/cofiles directories) to the same location in the target system.
2)Add the request to the queue from STMS ->Import Queue ->Extras ->Other Requests - >Add.
3)The execute the transport as usual.
Regards,
Sam -
I can't import photos from a card, file or anything. I get "could not copy a file to the requested location". I have never had this happen before. I use a MacBook Pro
I also have the exact same issue. New IMac, installed LR, imported approximately 900 photos no problem, across the network from a Windows PC. The import stopped when the network connection was lost. Now I cannot import for the same reason "could not copy a file to the requested location". I have plenty of disk space and i have permission to the needed folders. I cannot even import from a folder already on the IMac.
-
i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?
Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.
-
I can't import .ics meeting requests to iCal (currently using iCloud)
I can't import .ics meeting requests to iCal (currently using iCloud). Every time I drop it in or double click or import it it just doesn't show up. Is there a way round this or a setting I've not set up correctly?
Greetings Gillian,
Try dragging one of these invites out of Mail to the desktop. It should show up with a ".ics" extension as you indicate in your post. Double-click this file and see if iCal launches and offers you the invite in the lower left corner (or anywhere else for that matter).
If nothing happens when you double-click the file from the desktop try the following:
__Create a new user account on the Mac: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
__Put the .ics file you dragged to the desktop into Macintosh HD > Users > Shared
__Log out of the current user and login as the new user you created
__Go to Macintosh HD > Users > Shared in the new user and drag the .ics file to the desktop
__Double-click the file on the desktop and see if iCal opens and offers to add the invite
Let us know the results. -
(How can we) Import Flash Professional .FLA file format?
How can we import a Flash Professional .fla file format into Flash Catalyst? It would appear that we can't...at least not yet! I have added this as a feature request within the adobe labs site for Catalyst. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the
idea.
Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects.
Now that we are looking to migrate to FlashBuilder 4, and start to use Spark components, we are trying to find a workflow that allows us to use Adobe tools and to reuse our existing vector artwork. Since we have such a large number of assets, we are exploring various approaches, including the use of JSFL. So far we haven't found a good way to migrate from Flash-built skins for Flex 3 to Catalyst-built skins for FlashBuilder 4.Hi Ajay,
See attached V 7.0 example...
Hope it helps,
Nick
Attachments:
Read_txt_File.vi 20 KB -
Getting error message "Only a type can be imported-" when trying to execute jsp page
I get the error: "Only a type can be imported. com.adobe.cq.TestServiceImpl resolves to a package in adobe day cq5
I have created one bundle and installed in felix console. The status of the bundle is also Active. And also it is available in both service and component console.
Here is my TestServiceImpl class in com.adobe.cq bundle
package com.adobe.cq;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.BundleContext;
import org.osgi.service.component.ComponentContext;
import javax.jcr.RepositoryException;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Properties;
//src.component
//declares the class component. This will provide a wrapped ManagedService component in the OSGI container.
//src.service interface="SampleService"
//declares the service we are offering. Actually, the interface attribute is superflous, as by default, all implemented Interfaces are used.
@scr.component
@scr.service interface="testService"
@Component(immediate = true, metatype = true)
@Service
@Properties( {
@Property(name = "service.description", value = "abcd"),
@Property(name = "label", value = "myLabel") })
public class TestServiceImpl implements TestService {
public String sayHello() {
return "Hello World!";
Here is my jsp code
<%@include file="/libs/foundation/global.jsp"%><%
%><%@include file="/apps/mine/includes/functions.jsp"%><%
%><%@ page import="com.adobe.cq.TestServiceImpl,
org.apache.sling.api.SlingHttpServletRequest,
java.util.List"%><%
%><%
SlingHttpServletRequest r = (SlingHttpServletRequest)request;
TestServiceImpl testService = sling.getService(TestServiceImpl.class);
out.println("testService:::"+testService);
%>
<div id="te-nav" style="display:block !important;">
</div>
Is it because of am using annotation in TestServiceImpl class?
Could you please tell me how to fix it?
Regards,
AndersonHi Pawan,
Thanks for your information. It was problem with my pom.xml It started to work after changing my POM.xml
I am not able to get sling service for TestServiceImpl. But I am only able to create TestService which is my interface. I need to get reference for TestServiceImpl class not for TestService interface. Please help me to make it.
i have created TestServiceImpl and TestService class for testing whether my bubdle is crating all the folder structure or not.
But my requirement is like assume class A has some methods like getMenuLink, setMenuLink.. And In class B i am calling some methods in class A and doing some manipulation in createLink method.
Here class B does not have any interface. Not implementing any interface. But I need to get class B refererence via sling.getService.
I know that if we are using maven SCR plugin..we need to have @component, @service. And All java classes are not services. Will it work if I add activate, deactivate method in class B?
Could you please tell me how to proceed next?
Thanks,
Anderson -
"update rules inactive " error when importing transport request
Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc. -
Error when importing the request
Hi All,
I have collected few queries in to one request and imported the request in to quality client and iam getting below mentioned error
Execution of programs after import (XPRA)
Transport request : NBDK900366
System : NBP
tp path : tp
Version and release: 372.04.08 700
Post-import methods for change/transport request: NBDK900366
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20100406151003
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4HBCVLNBZJBOCJ2A2NP4Y0XEM
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request NBDK900366 completed
Start of subsequent processing ... 20100406151003
End of subsequent processing... 20100406151018
Execute reports for change/transport request: NBDK900366
Reports for change/transport request NBDK900366 have been executed
Start of................ 20100406151018
End of.................. 20100406151018
Execution of programs after import (XPRA)
End date and time : 20100406151018
Ended with return code: ===> 8 <===
Kindly let me know how to correct the error.
RegardsHi,
As you have collected more than one queries in a single request,first identify the query which is giving problem.For this you can go to se11 and diasplay table RSRREPDIR,go to output list of the table and under ID field give the hexa decimal Id that you got in the error log.The table will display the query associated with this.
In the target system check whether your query changes are reflecting or not.
Make sure that you have collected all the necessary elements ,that is variables ,resricted KFs etc.You can check this via RSA1 Transport connections.
Thanks
Sreeja -
How to find out which User id used to import Transport Request thru STMS ??
Dear Experts we have 6 BASIS Consultants in our org with STMS authroizations.
In every day we review Imported Transport request thry Import History Option in STMS.
Our requirement is which request is imported by which BASIS Consutlant thru STMS?
Thanks for your replies in advance
RegardsHi,
You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
Best Regards,
Srividya.R -
Problem in Importing Transport Request
Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
SivaHi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes. -
User should not be able to import a request.
Dear Forum,
We have a role created with all the transaction (*) given to a user.
We want to revoke/restrict the authorization to import a request. User be able to create/edit/release the request but should not be able to import. This should happen without changing to existing (*) but at the same time user should not able to import.
<removed_by_moderator>
Regards,
DD
Edited by: Julius Bussche on Feb 18, 2009 10:48 AM> And in the new role you can restrict the user.
I suspect the how was the original question. S_TRANSPRT is the (already given) answer. Deriving will do nothing for that object as not one of its fields is organizational. Besides that, restricting some more objects to make sure the user cannot create and/or use any workarounds is essential to make this work properly.
The additional request This should happen without changing to existing (*) scares me a bit. Why do these users need over 70000 transactions? -
"XI CONTENT ESM ERP" can be imported to PI 7.0?
Hi gurus,
We want to transfer the standard Purchase Request from ECC to SRM. Based on the fact that SAP recommend us to use Enterprise Service method, so I want to import content "XI CONTENT ESM ERP 604" into our PI 7.0 system. Anyway, it seems we can only do that in PI 7.1 version. Do you have any suggestion on this? 603 can be used in PI 7.1?
Do we have any other solution to integrate PR between ECC and SRM? RFC or idoc seems not good.
Thanks in advance.You can import either 604 or 603 in any PI system (7.0 or 7.1). The PI content is backward compatible. You can try importing in to the repository and see if it completes without any errors..
603 and 604 are base on the ECC enhancement packages. So if your ECC is on EHP4 you should use 604 content.
VJ
Edited by: VijayaShankar Konam on Aug 27, 2010 11:28 AM -
Importing Transport Request In GP
Hi All,
In GP , I want to export a trasport request and then import it . I successfully executed the trasport request and created a <b>.sda file</b> like this. GP Application tab -> Trasport -> Create Transport Request. The .sda file is stored in local system. When I try to Import it using Import Trasport Request, I am getting one warning like <b>"No endpoint alias has been maintained; create an endpoint alias first "</b> .
Please provide me some information on how solve this issue.
With Thanks,
VivekHi
You can simply erfer this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4850d4ea-0c01-0010-8b82-d72daa95b7dd
This will solve all your issues
Thanks & Regards
Harsimran
Maybe you are looking for
-
I would like firefox to default to a 125% zoom level. Is ther a way I can do this through firefox or through my desktop?
-
Steps to upgrade Discoverer 4i to 11g
Hi, Can you one please let me know what are the steps required to upgrade 4i to 11g. Thanks, Sri
-
ORABPEL-9708 Error while querying workflow task WFTask. Caused by:ORA-00936
Hi, I am trying to integrate my Primavera p6 web version8.0 with the BPM setup 11.1.1.3 . The BPM is setup fine. But when I integrated with primavera p6 and on load of workflows portlet of p6 web where the BPM tasks are listed, I am getting following
-
Hi Everyone, Please let me know if the following is there is standard SAP R/3 system...if it is there...how to go about it. 1.forecasting cash flow based on financial and non-financial information . 2.- Work flow procedure embedded in the syste
-
Crystal Reports Server XI meta data
Hi all, How can I extract the meta data of my Crystal Reports Server? For eg, how do I find out how many objects I have, their schedules, and the email address that I send the reports to? Can it be done via the CMC or I need to query the CMS database