Can I import and view from a camara

I was reading on the new that there are a few ways to import pictures from my Canon G5 camera. The two most common are the Belkin compact flash reader, or the apple iPod camera connector (I think it is called). the thing that plugs into the ipod and the camera plugs in through the USB plug. Is there anyway to import and view the pictures in the field from the Canon G5, or do I just import them as data and have to go through the computer later. This would be on a 5G iPod. Has anyone had success doing this in the field yet.

Am a new iPod owner myself, but as I understand it, you can view thumbnails or iPod screen size renderings of the photos loaded into the unit. Suspect the functionality will depend on why you need to look at them and the level of detail required for your field work.

Similar Messages

I can't import and view videos from a camera.

I can't import and view videos from a camera. Even if I open the file and copy the .avi files onto the hard drive. I have tried iMovie, Quicktime, and Flip player. Flip player will open it but I only get the audio, Quicktime freezes, and iPhoto tries to automatically import only to then error saying the files are not compatible.

Hello Hese,
try the following:
1. delete preferences (com.apple.iMovie.plist) and empty the trash
2. repair disc permissions with Disc Utility and reboot your mac
3. use Diskwarrior or MacJanitor for disc clean-up
4. disconnect any other firewire devices
5. take off any non-system desktop pictures
If nothing else helps, you might want to consider resetting your Firewire port(s)
How to reset your Firewire ports:
http://discussions.apple.com/thread.jspa?messageID=2001817&#2001817
hope this helps
mish

PSE-10 how do I import and copy from external hard drive into organizer

Can I import and copy from external hard drive into organizer? Under Get Photos, I select import from folders/files but after browsing to the external hard drive the copy option is disabled/greyed out. I there a method to import and copy?

That would be mounted as an internal drive and hence the corresponding option is not checked during Import.
Once you import the media form this drive, you can select all and go for File >> Copy/Move files option and copy them wherever you want to.
Hope this helps
Thanks
Andaleeb

Can't drag and drop from page view

Can't drag and drop from page view to desktop even though plus icon shows up for duplicating the page. On Mac 10.9.2 Acrobat XI. I don't want to extract through the menu and associated dialogues. Its slow and cumbersome.

Hi Peterbruce,
Acrobat for Windows will let you select pages in the Pages panel and drag them to your desktop, but that isn't an option in Acrobat for Mac OS. You can drag thumbnails from the Pages panel in one doc, to the Pages panel in another, however.
Best,
Sara

Can I listen and view a pptx in keynote?

Hi!
I'm a student and we have lectures that ar recorded in pptx or ppt. Can I listen and view the in keynote?
I have'nt bought keynotes yet and I want to know if I can use it before I buy it.
Another quastion is, can I create ppt or pptx files in keynote?

importing and exporting ppt files is not 100% but it does work well from simple presentations
ppt files that have different fonts, builds or transitions that have a coresponding match, wont transfer
Keynote exports ppt files, not pptx files

Can I import and open raw files on the new photo app?

Hi,
Can I import and open raw files on the new photos app on my ipad? Does it convert it to jpeg automatically when you want to share them?
Thanks.

Clem is telling you to click on the View menu, move the pointer down to the item "Metadata," & from its choices make sure "Show Titles" is selected. Do this, then make sure you are in a view in the main window that shows one or more videos (or whatever) that you want to title. Click once on one of them, & if the separate Info window is not open, open that (on the Windows menu or command + i as a keyboard shortcut). In the Info window the top line will be "Add a Title."
Click once on that & type your title.
This works for any item, video or photo.

All I want to know is: HOW CAN I IMPORT A PHOTO FROM MY MAC DESK TOP?

I am sorry to be so ignorant, but I am not sure of WHERE to "post" this question:All I want to know is: HOW CAN I IMPORT A PHOTO FROM MY MAC DESK TOP?

Do you mean you want to import a photo to the organizer? It's easier if you put the photo where you want to keep it before importing, but just go to File>Get Photos>From Files and Folders and import it. If you move it after importing you must move it in folder view in the origanizer.
If you just want to edit the photo, there's no need to import it. Just go to File>Open in the editor.

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

I can not import 60p files from Sony NEX-FS100U to Final Cut Pro X.

I can not import 60p files from my Sony NEX-FS100U to Final Cut Pro 10.0.1. Does Sony offer a plug in?

I shoot fishing footage of big catches. Slow motion playback appears to me to be much better when shot it 60p even compared to 60i. It also blows away all of the other formats for a "still" grab. Thank you for your help as I did a search and downloaded Clip Wrap which converted the files to .mov and they actually do import the full 60 frames. Thank you again for your reply.

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

Windows Live Photo Gallery stopped importing and scanning from my printer.

Windows Live Photo Gallery was allowing import and scanning from my printer. All of a sudden this feature has stopped working. I no longer get the dialogue box that asks whether I want to import documents or pictures... Could this be a setting
issue?

You can launch it manually.The executable for the Scanner and Camera Wizard is:
Start > Run > Type in wiaacmgr.exe > Press Enter key.
Related articles:
Windows 7 - Working With The Scanner And Camera Installation Wizard
http://windows.microsoft.com/en-AU/windows7/Working-with-the-Scanner-and-Camera-Installation-wizard
Maybe the following articles would be worth a look:
Windows 7 - Troubleshoot camera connection problems
http://windows.microsoft.com/en-US/windows7/Troubleshoot-camera-connection-problems
Windows 7 - How do I get pictures from my camera to my computer?
http://windows.microsoft.com/en-US/windows7/How-do-I-get-pictures-from-my-camera-to-my-computer
And it may be worth a try to adjust your autoplay settings.
Windows 7 - Change settings for importing pictures and videos
http://windows.microsoft.com/en-US/windows7/Change-settings-for-importing-pictures-and-videos
Windows 7 : AutoPlay : frequently asked questions
http://windows.microsoft.com/en-us/windows7/AutoPlay-frequently-asked-questions
Windows 7 : Troubleshoot AutoPlay problems
http://windows.microsoft.com/en-us/windows7/Troubleshoot-AutoPlay-problems
How to Configure AutoPlay Settings in Windows 7
http://www.techtalkz.com/windows-7/516004-how-configure-autoplay-settings-windows-7-a.html
S.Sengupta, Windows Entertainment and Connected Home MVP

Can I import movies originating from video's that were put on a DVD import in IMovie?, Can I import movies originating from video's that were put on a DVD import in IMovie?

Can I import movies originating from video's that were put on a DVD import into IMovie?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

I can't drag and drop from photos 1.0 to desktop

I can't drag and drop from photos 1.0 to desktop

What happens if you double click on the thumbnail to view the photo in a larger size? If you Control-click on the thumbnail and select "Show File" or "Show Original" (if it's been edited) are you taken to the folder where the original file is located an it highlighted?
OT

Can't import some photos from iPhoto to iPad

I can't import some jpg from iPhoto to iPad. It gives me an error message that the photo can't be displayed on an iPad. There also doesn't seem to be a way to reformat them in iPhoto. They are just jpegs downloaded from a digital camera.

Deleting the photo cache from the computer and then re-trying the photo sync has worked for some people - the location of the cache, and how to delete it, is described on this page
http://support.apple.com/kb/TS1314

I can't import my photos from my digital camera (Sony) this problem is recent. I have imported photos without problem a problem before.

I can't import my photos from my digital camera (Sony) to my iPad, this problem is recent. I have imported photos without problem a problem before. Is this problem due to the IOS 6 update? How can I fix it?

I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!

Can I import and view from a camara

Similar Messages

Maybe you are looking for