Can I import audio from a DVD to iTunes?

My iMac is  Yosemite 10.10.1 and my iTunes is 12.0.1.26.
I have a DVD (purchased) that I want to copy the audio only to iTunes.  Can anyone tell me how?

Just about all commercial DVDs use special copy protection.  It is illegal to rip these DVDs, and you can't rip just audio.

Similar Messages

  • Can you import video from a DVD?  If so how

    Can you import video from a DVD? I have some home DVD's made on my PC. My PC program (Roxio) allowed me to pull clips off of a DVD, but I can not seem to figure out how to do it with iMovie on my Mac.
    Any help would be greatly appreciated!!!

    Hi, I'll see if I can help. The only way I know of importing directly from iMovie off of a DVD is with a converter box hooked up to an external DVD player. However there are a few freeware programs you could try. One is Handbrake, with it you can convert your DVD into a MPEG-4 file, this is incredibly easy however the quality will be a little lower than that of a DVD. Another program is MactheRipper which will rip the entire DVD onto your hard drive but you will have to hunt through all the files to find the ones you want. I hope this helps.

  • Can I import just the audio from a DVD into itunes????

    I'm a beginner to this Itunes and have been wondering this. If I can take audio files off of CDs and put them into Itunes. Can I take just audio from a DVD and put that into Itunes. Example: Can I take the audio from a live concert DVD for just one song?

    Welcome, Don, to the Apple Discussions!
    No, you can't do that with iTunes.
    There is third-party software available that allows you to do so, though.
    You might want to pay a visit to Google and enter
    b dvd audio ripping
    or some such terms.
    Good Luck!

  • Importing Audio from a DVD Concert

    I want to import the audio from a DVD concet into iTunes.
    I've tried MactheRipper and MAC3dec to do the conversion but the main concert file was 1 hour and 15 minutes long and it only imported the intro which lasted about 45 seconds.
    What I'd really like to do is import the entire concert then cut it up into songs to import into iTunes.
    So my questions are:
    1. How do start with a 1.3 hour audio file on DVD and end up with 16 song files in my iTunes library?
    2. Is it possible to do this with AudioHijack or a similar program?

    The software is capable of extracting audio only at the chapter level. Using a DVD I mastered myself, I can use the Mode button, then select Title - Chapter Extraction, click the D button, and then the Streams button becomes active. Clicking that opens a drawer where all the various audio tracks are available, and they can be extracted one at a time using the SChpt and EChpt drop-down lists.
    Again, please be sure that whatever you're doing with a DVD is legal in your own case. I am not suggesting that you use any particular software for any particular purpose, but just explaining how to navigate through a confusing interface in a program you already seem to have.
    EDIT: I've read through your posts again, and you mentioned that you bought the DVD. Of course I can't be sure about this, but if it's a commercial DVD, it is most likely encrypted. In that case, you really must be sure that you have the right to extract audio tracks from the disc (or even to use the software in question)--even though you're not "copying" the disc by working only with the audio portion, it may be the case that even the audio on the disc is protected in some way by copyright. So, I can't emphasize enough that I in no way am encouraging you to do anything outside the scope of fair and legitimate use of your DVD product.

  • I can't import music from my computer into Itunes

    I've been trying to import music from my computer into Itunes, And it isnt working
    I have the latest version of Itunes
    When I try adding the files by clicking add file in Itunes or by dragging, it does nothing
    I know it means that the file is incompatible with Itunes, But I have put the same type of file into Itunes before with no issues (MP3)

    Hey Haley.1182,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you are having trouble importing music into iTunes. A frustrating situation for sure. The first article should help get the music imported. The second article shows what formats are compatible with iTunes.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/TS1387
    iTunes: Compatible Audio File Types
    http://support.apple.com/kb/TA44475
    iTunes 1.0 and later can import and play the following audio file types:
    AIFF
    AIFC
    audio CD
    MP3
    System 7 Sound (SND)
    uLaw (AU)
    WAV
    QDesign
    QuickTime audio (audio only movies)
    Have a nice day,
    Mario

  • Ripping Audio from a DVD to iTunes

    Does anyone know a simple way to rip the audio from a DVD to an mp3 for use in iTunes? I have some stand-up DVD's that i would like to listen to when I want.

    You have to extract/demux the audio portion from DVDs using a tool like MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-win.html
    As most commercial DVDs come CSS encrypted in this case you have to use a so called Ripper to copy the DVD's content first to your HD.

  • How do i import music from a dvd into itunes

    how do i import music from a dvd into my itunes? thanks....

    This is a great question. I would also like to know about it. Anyone there to help???

  • Can't import audio from clip into Premiere Pro CC.

    I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing.  I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully.  Can someone please instruct me as to how I can edit the .xmp file so as to correct this problem?  Thanks.

    I export a clip using the "match sequence settings".
    Mmm, don't ever use that.  It's for people who don't know what they're doing, and often causes more problems that it solves.
    Better to know what you're doing and set up your export manually.  Try that, then report back what happens.

  • Can't import audio from .mov into iMovie 10.0.3

    When importing a .mov file with sound into iMovie 10.0.3, the audio does not import with the video. I have no sound. The file plays and sounds fine on the desktop. What am I doing wrong?
    Macbook Pro, OSX 10.9.3. 16G Ram, 768GB SSHD 2.7GHz Intel Core i7

    Hello John,
    Check out the first article for some troubleshooting steps to see if anything is preventing the audio from playing properly. Also try using QuickTime to convert the video in a different format and then import it into iMovie to see if that changes things.
    iMovie is missing audio on import, export, or playback
    http://support.apple.com/kb/ts2289
    QuickTime Player 10.x: Export a movie in another format
    http://support.apple.com/kb/PH5878
    Regards,
    -Norm G.

  • Can't import songs from music library to itunes!

    I have no problems importing songs from audio cds into itunes, but it won't recognize any of the files that i have in other folders of my computers (in mp3 format). and when i select 'import' and these songs, it just doesn't do anything. any suggestions to help??? thanks!
    dell inspiron 4100   Windows XP  

    Most of them are files burned from an audio CD onto another computer, and then saved onto a USB device and then transferred onto my computer (I no longer have the original CDs, hence the roundabout procedure). some of the files however, are simply from 'my music' folder that i had previously burned onto my computer before installing itunes. i've checked the status of all the files--and none are protected. any suggestions? thanks!
    Reknath, where did these files come from? If there
    were downloads from other websites, they are probably
    protected & that's why you can't get them into iTunes.

  • How can I import my Blu-Ray DVDs into iTunes?

    Is ther an easy process in which I can import my store bought copy protected Blu-Ray DVDs into iTunes so I can watch them on my iPad or Apple TV?

    It is illegal to do this.
    MPAA Says Making Even "One Copy" of a DVD is Illegal
    Judge rules that DVD copying software is illegal | Technology ...
    Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
    Burning Backup DVDs Ruled Illegal - Feb. 24, 2004
    DailyTech - U.S. Court Rules Consumers Never Have the Right to ...
    MPAA: Making a Single Backup Copy of a DVD is Illegal | Maximum ...

  • How can I import pictures from my computer to iTunes without losing my iPhone pictures?

    Hey
    I'm wondering how I can import pictures from iTunes to my iPhone. I have taken pictures with a camera, not my iPhone camera. And I got the pictures on my computer, just don't know how to import them to my itunes and then to my iPhone. And I also don't want to lose all my iPhone pictures in my camera roll when I do this.
    Thanks

    Camera Roll is the folder on your iPhone which kept all the photos taken from your iPhone Camera or Photos received and saved from your email attachments.  They will remain in that folder until you delete them.  You may, however, import these photos to your Computer if you want to.
    Refer to this article:
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Now the other way round, if you want your Photos from your Computer(whether it's taken from other Digital camera or photos already on your computer) to be transferred to iPhone, you have to sync them over like I mentioned in the first reply.

  • Importing audio from a DVD?

    My from has a concert dvd and two other formats that are dvd-audio. He wants to import them as just the audio file into itunes. Is this possible in itunes or with another application?
    Thanks in advance!

    Phil Tribb wrote:
    My from has a concert dvd and two other formats that are dvd-audio. He wants to import them as just the audio file into itunes. Is this possible in itunes or with another application?
    Thanks in advance!
    Sorry, but discussion of ripping DVD's is not permitted since it would involve breaking encryption.

  • How do I import audio from a dvd?

    There is a song on a dvd that I want to import into iTunes. I searched all through iTunes store, amazon & the movie companies website, but there is no soundtrack available for sale.... or by the musicians anywhere.
    Is there a program that will record any audio that I play on my mac, and then I can import that audio into iTunes?

    It's currently unclear if actually copying a DVD is illegal. What is illegal under the Digital Milennium Copyright Act, is breaking the encryption on commercial DVDs (a necessary first step in copying). Recording the audio as it is played by your computer (what is sometimes called the analog loophole) is still, apparently, covered under the older fair use laws. So, as long as you're just recording the sound for your personal use, I think you're okay. Burn it to CD and sell or distribute it and you've crossed the line

  • Import audios from VCD, DVD, RealMedia, casette tape, vinyl record, etc.?

    Hello,
    Is there a way to record/rip these other sources beside CDs to an iPod Nano? This is for someone who is using one and a Windows XP Media Center SP1 (all updates). He is not a computer expert so he won't know how to convert, pick bitrates, etc. Are there any software products that can rip/record, convert, etc. with ease like Apple products?
    Thank you in advance.

    To answer part of your question, one way to record
    vinyl is to connect your player (through the Tape out
    sockets of your amplifier) to the audio in socket of
    your computer. On the computer you'll need audio
    editing software to capture and edit the resulting
    long file into individual tracks that can be added to
    the iTunes Library. There are a number of commercial
    programs for this (I use Sound
    Studio for the Mac but there are Windows
    programs). If want to try out the process first you
    could try the open source program Audacity which has
    Linux, Mac and Windows versions at this link: Audacity
    In addition to the software you'll need RCA to 3.5 mm
    audio plug cables to connect the Tape Out sockets of
    your amplifier to the audio inputs of your computer.
    There's a short guide to recording here: How
    to record from vinyl and cassette to a computer
    also from the BBC Copying
    Vinyl Recordings to CD
    Thanks. This sounds more complex than I thought it would be. Is there a specific file format that the recordings have to be in? I recall in the past that I had to record as WAV format before even converting to MP3, but that was years ago.

Maybe you are looking for

  • Key Figure Aggregate in Bex Query based on Charactersitic

    Hi Gurus I am using BI7.0; but 3.5x BEx tools I am loading 6 fields from a flat file.  I am loading data for tickets.  I have create an InfoObject that counts the number of tickets.  No problem.  Also I also have key figures that I am assigning the s

  • How to remove pause from Text Entry Box

    Saw a discussion on this in the archives, but didn't exactly address what I was hoping. Basically I'm hoping to use a Text Entry box to allow a user to save notes for the project. Yes, I know that there is a notes widget, but I'm not a fan of it. Is

  • I moved from france to the Uk in july But Apple doesn't understand---

    I can't change the apple store country because I have a iCloud account until december that I can't cancel. But a message says "cancel it first-" Plus, I had to write a fake address because the address in the apple ID doesn't recognize the fact that i

  • Project definition system status change details

    Dear PS experts, Request, kindly let me know which report is available to show the system status change from crtd to rel rel to teco teco to clsd we would like to analyse which date or period the system status changed thru edit-status from crtd to re

  • Flash Component Problem in D11

    I have a project where I am using flash component CheckBoxes.  I loaded them onto the screen and when I try to make the sprite width of each checkbox wider, the sprite seems to disappear on the stage. If I dont mess with the width, they display just