Can I import content .asp in Adobe Muse?

Is it possible to import a content .asp in Adobe Muse? Or there's another way to do it?
Thank you!

If you are using a third party host for your asp content the only way would be to use an iframe in your muse design to display your asp stuff.

Similar Messages

  • Can you change the extensions in Adobe Muse from .html to .htm?

    Can you change the extensions in Adobe Muse from .html to .htm?
    I'm updating an old site where the extensions for the pages were all.htm. This means that when I upload the site index.htm is not being over written by index.html.

    Hi,
    It is not possible to change the extension in Muse at the moment. You can export the site as HTML and change the extensions outside the Muse.
    Regards,
    Aish

  • Can Wowslider effects be use in Adobe Muse?

    Can Wowslider effects be use in Adobe Muse?

    Hi Stewart,
    Please refer to the following link http://forums.adobe.com/message/5250998#5250998
    Regards,
    Aish

  • Why I can't design my website by Adobe Muse in Turkey?

    Hi, why can't we use Muse in Turkey?
    I really wish to work with Adobe Muse.. please give me some deep answer about it..
    Thanks,

    Neither Adobe nor our local distributor have a mechanism in place in Turkey so sell subscriptions to Muse (or Creative Cloud).
    Please contact me directly as [email protected] and I believe I can offer a satisfactory alternative until a subscription purchase mechanism is in place.

  • Please help - Can I start my use of Adobe Muse when I choose? I have purchased a month by month

    Hi, I have purchased a month by month subscription to creative cloud to use Adobe Muse.  I only want to use it for a month though.  I have not used it yet but I need to know when my 'month' actually starts - I assumed it would start when I initiated the program and was ready to use it!?
    I have downloaded the program (Adobe Muse) and left it - assuming it would only begin my 'month use' when I started up the program (as in a 30day trial)
    My account is due to automatically renew my subscription soon (which I didn't realise either - I figured I paid once for a month use!) and I will be charged for another months use now - however, as you can understand by now, I want it to start when I want to use it! - not as soon as I have purchased a month by month subscription (hope that makes sense)
    What are peoples thoughts on this and is there anything I can do allowing me to activate 1 months use for one months paid for subscription?
    My fear is that I will have paid for one month that is neraly over and I havn't even used the program yet!?
    Please advise!

    Hi munzafeedback,
    I have checked your order registered under your email ID posted here, it has a muse single App CC purchased on September 23rd 2013,
    You have not yet activated it, the billing date is 23rd of each month(you will be charged on this date irrespective of the fcat that you are using it or not).
    Incase you do not want to use it now, please get it cancelled as it is within 30 days of purchase.
    If you plan to cancel it after 3o days of purchase, the subscription will attract cancellation fee .
    Please go through the cancelation detail at :
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
    Regards
    Rajshree

  • Where can I sell my widgets for Adobe Muse?

    Hi there,
    I did a widget for Adobe Muse, and where can I sell my widgets for money?
    Thanks.

    I got this message. But I don't know why they don't submit to the Addons Library. And I don't want to wait...
    Hello Vad Yakupov,
    Thank you for submitting Connection FX 1.0.0 to Adobe Exchange. Your product has been received and will be reviewed shortly. You will be notified as soon as your product has been reviewed.
    Regards,
    The Adobe Exchange Team
    Thanks

  • Can't import content with '&' in XML element

    I encountered the following error msg when importing the sample XML with '&' in content of an element(for example, a URL with '&' for parameters):
    <?xml version = '1.0'?>
    <ROW_List>
    <ROW>
    ...... <D3_STRU_URL>http://www.ncbi.nlm.nih.gov/mmdbsrv.cgi?form=6&db=t&Dopt=s&uid=14422
    </D3_STRU_URL>
    Error msg said:
    <Line 19, Column 78>: XML-0100: (Fatal Error) Expected ';'.
    <Line 19, Column 78>: XML-0250: (Fatal Error) Missing entity 'db'.
    <Line 19, Column 85>: XML-0100: (Fatal Error) Expected ';'.
    <Line 19, Column 85>: XML-0250: (Fatal Error) Missing entity 'Dopt'.
    <Line 19, Column 91>: XML-0100: (Fatal Error) Expected ';'.
    <Line 19, Column 91>: XML-0250: (Fatal Error) Missing entity 'uid'.
    It seems that '&' is used by XDK for a kind of special purpose.
    Does anybody know how to handle the problem if I really want to import content with '&'?
    Thanks a lot for your help.
    Yihua

    The "&" character is part of the reserved word content.
    Just like: <, &, >, ", ' to use these in an XML file you should
    use:
    <     <
         >&#8220;     &quot;
    &#8216;     &apos;
    like: This is worth < $250K
    will become: This is worth < $250K
    Willem

  • I can no longer successfully Publish my Adobe Muse site.

    Initally my Muse software was working without problem. Now, I continue to recieve the error:
    "Error uploading file jquery-1.8.3.min.js. Click Resume to try again. If this problem persists, try again later."
    This error occurs when trying to publish my site within Adobe Muse.
    Please help me solve this problem as this website is critical to my online business.

    Do you continue to receive the error after following the instructions here - http://forums.adobe.com/message/5086018#5086018#5086018.
    Also, refer to this post and see if that helps in your case - http://forums.adobe.com/message/4500365#4500365.
    If you are unable to publish the project to a new temporary BC site either and you continue to receive the error as "Could not check for Adobe Business Catalyst changes. Check your network connection and try again. If this problem persists, try again later" even after clearing Muse's preferences/cache as detailed in the linked threads, please contact Muse chat support through helpx.adobe.com/contact.html?product=muse.
    Thanks,
    Vinayak

  • How to import URL image into Adobe Muse ?

    Hello dear Adobe Community,
    I have a (silly) question, I'm building my website on muse and I can't find the way to import URL image.
    Are you forced to have all your image stocked in website ? I used to have everything on Google Plus to save me some storage place for the HD image and then to load it via URL in my old website.
    Is there anyway to import URL image ?
    Thanks you very much for your answers !

    Hello,
    In case of google plus you can  do that. Please follow the steps below.
    Step 1. Get the url of the image from google plus by Right click > Copy Image URL
    Step 2. Now you need to insert the HTML codes mentioned below in Muse by going to Object > Insert HTML
    <img src="ImageURL" width="400" height="400">
    You need to replace "ImageURL" with the link you copied from step 1. Please make sure the images are public.
    Please let me know if you face any difficulty.
    Regards
    Vivek

  • Can you import a master from one Muse file to another?

    I've got upload space through Comcast, and my homepage and other material are there.  (home.comcast.net/~gregfisk/)
    But I have another site that I uploaded there through Dreamweaver a year ago.  I'd like to update it with Muse.  (www.caption-ator.com)
    But the thing with Muse is, when it exports a site to HTML, it defualts the home page to 'index.html'.  In this case, the caption-ator site info (made with muse) would over-write my main web page.  The same goes for any files that share the same file name, like 'site global.css', and 'sitemap.xml'.
    So I guess I should take the site info from the caption-ator Muse file, and rebuild it in my personal web page. So there will (theoretically) be no conflicts in the file names, and can all be uploaded safely.
    Rather than rebuild the whole Caption-ator muse built site in the Muse file for my personal web  page - is there any way to take a Master page from one Muse file, and import it to another?  That would be a HUGE time saver.  My first instinct would be to take the Muse tab for my personal web page, and the Muse tab for the Caption-ator web page, then drag and drop the Master from the Caption-ator page to the personal web page.  But Muse doesn't seem to allow for tabs to be kept separate like that.
    Any advice is apprecaited.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Can't import .mov files into adobe premiere pro cs6. Help please!

    Help please. When i try to import .mov files i get a message saying, "The importer reported a generic error." This video was taken from a nikon D7000 camera. If you have any questions i can answer them very quickly!

    Hi WatsYourPowerLvl,
    Thanks for posting on Adobe forums.
    Do you have QuickTime Player installed on the machine ?
    if not please install from :
    for MAC : http://support.apple.com/kb/dl923
    for Win : https://www.apple.com/in/quicktime/download/
    if yes please tell us following information :
    What is the OS and version ?
    What is the Graphics Card installed on the system ?
    How much Ram do you have ?
    Do you use any external Hard Drive ?
    Are you using security software e.g. Norton, etc
    and
    if windows, Please check if you have windows defender turned on ?
    Regards,
    Sandeep

  • Can't import pic/video via Adobe Bridge anymore

    I just installed ios 7 on the iphone 5.
    I tried to import my pic/videos to my mac book pro via Adobe Bridge like I always do,
    but Adobe Bridge(or iPhotos) doesn't recognize any files on the iphone.
    I never had this issue before.
    How can I make Bridge recognize the files for me to import the files to the computer?
    If someone had the same problem and solved it please let me know.
    thanks.

    Hey Sue,
    Thanks for the reply. The external drive is formatted MS-DOS File System (FAT32). I had to do this because I had problems with it at first when I was using it interchangeably with a Mac and a PC. When it was Mac formatted it wouldn't be compatible with my PC for some reason (or I could read files, but couldn't write - something like that). Any suggestions?
    Thanks again,
    Dylan

  • Premiere CS4 I Can't Import .MXF files but Adobe assures me i can?????

    Hi I have Adobe Premiere CS4 and I am trying to import some videos to it and they are in .MXF format. Premiere issues me "codec missing or unavailable" and I don't want to download some sort of converter. Isn't Premiere supposed to support .MXF files?????????

    Not sure about CS4, I started with CS6. And hope I'm not being preachy here, but an awful lot of troubles over MXF files have the same root problems. Even some very experienced editors have had issues with this. The vast majority of the times this error comes up people have not imported as PrPro needs it ... MXF files are a form of AVCHD ... the camera makes separate (and oft fairly short) sections of video file and matching audio files, stored on the cam in separate folders, with a database to tell any further software use which pieces are part of the same "full-length" clip, and that data is stored in a different folder-tree from the other files. If you don't properly import the whole folder tree, PrPro says ... no go.
    So ... when uploading onto the computer, or moving the files around to various drives, you ALWAYS need to take the entire folder-tree from the camera and move it intact. Some other softwares manage to sort out MXF/AVCHD files while the top level folder didn't get copied, PrPro probably will choke. Next, you need to navigate to the files in the Media Browser and then select and "Import" those files, then work them from the Project panel.
    Oh ... and often times if these are on external drives, PrPro can be picky about seeing/working with them.
    Neil

  • Can users view content produced by Adobe DPS on Desktop (MAC/PC)

    I'm new to the Adobe DPS product line and was wondering if someone could clarify if the DPS product line can produce content that can be published for viewing on mobile devices (iPad, Android, playbook) as well as Desktop (MAC and PC)

    Thanks, I ‘m not looking for authenticated purchases or selling of content at all. Rather I have a client who is going to produce content for use by his staff in via ipad (i.e. for a sharing content in a face to face one on one scenario) but also wants to be able to use the same content on a PC for a secondary purpose.
    So from link you provided sounds like this could be done via sharing of the link via email which then gives the recipient access to the content to view from a standard web browser. Is this correct?
    Alex

  • How can I create a wiki with Adobe Muse?

    I need to create a wiki for a competition I am in, and I want it to look nice. I need HTML code to create the wiki, and all the code needs to be hosted on their website. They have a box that we are supposed to place the HTML code in. When I use the code that Muse has exported, there is no CSS. How can I get this to work? Thank you

    Hi,
    This is something I won't recommend because you need to completely restructure the HTML of the page to do so. You need to be technically advance in coding. It will be like re-writing the code and can even break the code. It is very likely that some feature may not work properly.
    Regards,
    Aish

Maybe you are looking for

  • Site messed up after adding Contact form.

    The site is online in its current state: http://www.wientjesvoegwerk.nl/index.html The site uses (X)HTML, JAVA, PHP and Spry tabbed panels with a CSS layout. The current state has: <?php include("mail.php"); ?> Before the Doctype, etc. <?php $xajax->

  • Missing Text in Book - Clarification(s) requested

    I recently ordered a book using iPhoto. When I received it, seven of the text pages contained no text whatsoever - only the black background. Having read through enough information in Apple Discussions to learn how to check the contents before orderi

  • Outlook problems with Lion

    I have just updated the software on my MAC to Lion 10.7.2 (11C74) and now my outlook client won't allow me to reply/forward emails or create new mails - any ideas how I can fix that or why that's happened?

  • Dynamic Discovery on WebSphere 4.0.7

    Hi all, I wrote my pluggable navigation and I modified the LoginHTML, LoginModel and LoginControl. Then I put the navigation and the modified login code in one .jar file and I added it in the CustomActivitySpace.xml. On a machine running Tomcat all i

  • Saving a Slideshow in LR 2

    Hi! I am new. I have just created a great slideshow in LR2 that I want to save. How do I do that? I spent a lot of time on it, so I don't want to have to redo it. Do I burn a disk or export to CS3 or what? Thanks in advance.