Can I import flash files into Premiere Elements 8

I want to use Google Motion charts in my video. Is this possible?

thanks for that info. I wil probably purchase it for myself -- but I wanted to test it first.
Date: Fri, 27 Aug 2010 10:41:01 -0600
From: [email protected]
To: [email protected]
Subject: Can I import flash files into Premiere Elements 8
One thing to point out, if you are doing this with the trial. While it is 100% (nothing crippled, or omitted), the trial WILL put a watermark on the finished Project. If you are doing this for work, be aware of that watermark. This http://forums.adobe.com/thread/433730?tstart=0 will give you some tips and background.
Good luck, and I do not want you to be surprised and mad, when you get that watermark.
Hunt
>

Similar Messages

  • Can I import 264 files into Premiere Elements 11

    I get a generic error when I attempt to import some 264 files. These were created on a cctv system.

    As soon as I saw this post, I searched for the .264 extension in my hard drive. Found two files - could play both of them in Premiere Elements 11 and 12. Just imported them and played them on the expert room timeline.
    Pathetic quality of the video though. I am not sure how these are there in my hard drive! Got to check with my friends for whom I have edited some projects if it belongs to them.
    The complete Mediainfo output from one of the files.
    Format                                   : MPEG-4
    Format profile                           : Base Media / Version 2
    Codec ID                                 : mp42
    File size                                : 1.02 MiB
    Duration                                 : 22s 0ms
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 388 Kbps
    Encoded date                             : UTC 2007-07-11 04:58:13
    Tagged date                              : UTC 2007-07-11 04:58:14
    Video
    ID                                       : 2
    Format                                   : MPEG-4 Visual
    Format profile                           : Advanced Simple@L3
    Format settings, BVOP                    : Yes
    Format settings, QPel                    : No
    Format settings, GMC                     : No warppoints
    Format settings, Matrix                  : Default (H.263)
    Codec ID                                 : 20
    Duration                                 : 22s 0ms
    Source duration                          : 22s 11ms
    Bit rate mode                            : Constant
    Bit rate                                 : 256 Kbps
    Width                                    : 352 pixels
    Height                                   : 288 pixels
    Display aspect ratio                     : 1.222
    Frame rate mode                          : Constant
    Frame rate                               : 30.303 fps
    Standard                                 : PAL
    Color space                              : YUV
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Compression mode                         : Lossy
    Bits/(Pixel*Frame)                       : 0.083
    Stream size                              : 682 KiB (65%)
    Source stream size                       : 682 KiB (65%)
    Language                                 : English
    Encoded date                             : UTC 2007-07-11 04:57:37
    Tagged date                              : UTC 2007-07-11 04:58:14
    Transfer characteristics                 : BT.601
    Matrix coefficients                      : BT.601
    Audio
    ID                                       : 1
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 22s 0ms
    Source duration                          : 22s 13ms
    Bit rate mode                            : Constant
    Bit rate                                 : 128 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Stream size                              : 344 KiB (33%)
    Source stream size                       : 345 KiB (33%)
    Language                                 : English
    Encoded date                             : UTC 2007-07-11 04:57:35
    Tagged date                              : UTC 2007-07-11 04:58:14

  • Can't import prores files into Premiere Pro CC or SpeedGrade CC

    Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
    I also can't export to DNxHD files to an MXF file either.
    I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
    Conflict?

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • Importing project files into Premiere Elements 7

    I have created a new project, imported several video clips and then created a video. It was only at the point of creating the video that I reliased that I had not created the project with the correct settings.
    Although the video looked fine in the editing window, the final video had black bars at the sides, and above above and below the video, and fairly think black bars. I've tried exporting as different formats, and changing the aspect ratio, but this has not helped. I've attached a jpeg of what the video looks like in Quicktime.
    Other video editing software I have used, has the ability to change the project settings after it has been created, and give a warning to the user about possible problems they may encounter by doing so.
    This does not appear to be the case with Adobe Premiere Elements 7, and it is extremely frustrating!!
    One thing which appears to be possible with Premiere Pro, and was also available on other editing software I have used, is the ability to import projects.
    So... does anyone know if it is possible to import a Premiere Elements 7 project file into Premiere Elements 7? The aim here is to create a project with the correct settings, and then import the existing project file into the timeline.
    I've tried hacking the project file, which has improved the video slightly, but still not what I was expecting.
    Cheers
    Paul

    This problem should have been picked up by Adobe's test analyst during testing of the product.
    I am sorry, but I am not following you on this. There are Presets to match many media types. I am not at all sure how Adobe could anticipate that a user would choose the wrong one.
    As I said, PrPro CS4 will both allow you to Import your .PREL (with the caveats mentioned), and work on the Project with Sequence settings to match. Unfortunately, PrE is a much less sophisticated and expensive program, than is PrPro CS4.
    I'd be happy to Import your file, in PrPro with the proper Presets, but the rub would be that PrE cannot Open .PRPROJ files, so you still could not edit it.
    Sorry, but the first rule of any NLE is to establish Presets that match one's Assets. PrPro CS4 (not before that version) allows one to cover their mistakes a bit, but there is still some work getting the improperly set Sequence's material into a new, properly set Sequence.
    If you have access to PrPro CS4, and can finish your Project there, that would be the best. Next would be to create a New Project with the proper Presets and chalk up the lost time as a learning experience.
    Sorry ot bear the bad news.
    Good luck,
    Hunt

  • Can't import Photoshop files into Premiere Pro

    I am learning Premiere Pro CS6 and I am using a book titled "Classroom in a Book".  One of the exercises is to import a Photoshop file into Premiere Pro.  I received a generic error message "The importer reported a generic error".  I found that if I run Premiere Pro as an Administrator that the issue goes away.  I wasn't too worried about it until I realized that my ShuttleXpress does not function when I am running Premiere Pro as an Administrator.  Does anyone have any idea what is going on???? This is very frustrating.

    I only have one account on the computer and it has Administrator priveleges.  What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator").  I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator".  Also, your answer still does not address the fact that I can't use my jog wheel.
    Anyone else have some ideas?

  • Can't import .scc file into premiere

    I am trying to import a closed captions file into Premier CC
    I am getting  'The file cannot be opened because of a header error.' each time
    I have tried every format I can for closed captions to try and import
    I have also re-exported versions frm two different subtitle programs on two different PCs
    Any help/advice much appreciated!
    Many thanks!

    Hey Mark, londonboy,
    I recently ran into this problem too and figured out a solution. I replied to a similar topic (http://forums.adobe.com/message/5839277#5839277) with the solution.
    Basically, I was able to import it once I changed the .scc encoding from UTF-8 to 1252: Western European.
    If you don't know how to do this, or it still doesn't work, check the link above.

  • Can I import Flash files to Premiere

    I have a video I'm trying to put animation into, and I was hoping there was a way to do the animation in flash and import it into premiere.

    That depends on what version of Premiere Pro you're running. CC7.0.1 and earlier: yes. CC7.1 and later: no. For a little more on Flash support being removed: http://helpx.adobe.com/premiere-pro/kb/premiere-pro-cannot-import-flv.html
    The current version of Adobe Media Encoder continues to support importing Flash content, so if you're on PPro 7.1 or later, then one option is to use AME to transcode to another format.

  • Unable to import .mp4/.ts into Premiere Elements 3.0

    I've captured footage from my PlayStation 3 using this device: http://gamerzone.avermedia.com/game_capture/live_gamer_portable
    The device saves the footage in a .ts file.
    I've tried to get information on the file using a program. If there's a better way to do it, please let me know:
    When I try to import the file into Premiere Elements 3.0, I get an error message: "File format not supported/One of the necessary components may not have been installed."
    I've converted the file into an mp4 format with this program: http://ftp2.avermedia.com/C875/C875_utility_v1.0.0.9_20131029.zip
    Information on the file:
    But this did not solve the problem.
    Ideally, I would like to avoid converting the video file, if that would take up a lot of time. If I can just upgrade Premiere Elements, that would be the most ideal solution.
    Please let me know if any additional information is needed.

    Akvod
    I am able to import a .ts file into Premiere Elements 10, 11, and 12 Windows 7 64 bit.
    But, not so, for Premiere Elements 4, 7, 8, and 9.
    And, the reason why your .mp4 conversion did not work would be in accord with the fact that you used AVCHD as the video compression, and AVCHD video compression was not supported by Premiere Elements until version 7.
    If you do decide to move to version 12, please note that there is a dramatic difference in workspace between 3 and 12. So, go the free tryout of 12 before any purchase.
    You could try to convert the .ts to H.264.mp4 and not AVCHD (MPEG4 AVC/H.264).mp4 and see if that works for you.
    ATR

  • When I import .mts files into Premiere 7 the audio is intermittent?

    Good afternoon. I am new to this forum and your help would be appreciated. I have recently purchased a Sony Hard Drive Camcorder X105E and I have done my first filming. When I import the files into Premiere Elements 7 and preview them the audio is intermittent on playback. What am I doing wrong cause I cant figure it out?
    Thanks in advance for your answers
    Regards
    Edenr1

    OK, on the I/O, you have one, nicely sized, physical HDD. You don't have it partitioned, do you?
    With one physical HDD, so many things are happening at the same exact time:
    1.) your OS is reading/writing to it
    2.) your program is reading/writing to it
    3.) your media is being read from it
    4.) your OS's Virtual Memory is probably being used, so it's reading/writing to it
    The problem is that all of these (plus possibly some other programs/Processes) are fighting to get their data handled at the same time. Each is telling the HDD that it needs the heads in one place on a platter. Same for the next program, and the next. Unfortunately, regardless of the speed of the HDD and the speed of the controller, the heads can only be in one place at one time.
    Especially for the Audio (that is more I/O intensive, than the Video usually is - it taxes the CPU much more), you will benefit from more physical HDD's.
    I just posed an ARTICLE in the Tips & Tricks sub-forum. It links to two articles by Harm Millard. His article on HDD setup is a gem. Now, it takes things to a professional NLE level, and few are quite ready for that, still the info is good. Much can be extrapolated from his suggestions. Though he lists the ultimate Video editing setup, many concepts can be applied on a smaller scale. You might want to read over the linked articles. They will give you some things to think about.
    Also, I just saw an ad for a 1TB WD ATA-300 HDD for US$ 79.00 at Fry's Electronics. While you may need an ATA-100, this shows how far prices have fallen. I've got an ATA-100 1TB, to augment my 4x1TB SATA II's, and it's not that old. I paid US$ 400 for it! Should have waited, but then I've used it for the last year, so all is not lost.
    Good luck,
    Hunt

  • Problem importing some .MOV files into Premiere Elements 11

    Hello,
    I am trying to import film footage into Premiere Elements 11 and am coming across a rather confusing problem. All of the footage is in .mov format and all of it was taken on the same device on the same day with the same settings.
    When I try to import the footage, some files import ok, others will not import at all and I get a message saying 'The importer reported a generic error'. It seems very odd to me that some .MOV files are OK and others are not.
    This same footage can easily be imported into Premiere Elements 10 and into Windows Movie Maker - which makes me think the issue is with Premiere Elements 11.
    Does anyone have any ideas on this?
    Thanks

    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from the camcorder to your computer?
    Have you ensured you have the latest version of Quicktime installed on your computer?

  • Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

    Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
    If so how do I accomplish this act?
    Are their additional menus available for Encore CS4?

    The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
    As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
    Good luck,
    Hunt
    PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

  • How to import pdf files in Premiere Elements 8

    Hello,
    I'd like to know if there's a way to import pdf files in premiere elements 8, becouse if I try to import it in "project" it gives me an error saying "this type of file is not supported".
    Thank you
    Sebastian

    Unfortunalty it's not working for me yet. If I try to import the PDF (single page)  into the project, the progress bar reach 100% but then says: "the file is not supported, or the required codec is not installed". I have Acrobat Reader 9.3 installed too.
    I've uploaded one of the PDF's that I want to use if you want to test it yourself:
    http://www.megaupload.com/?d=YB7NT4QR
    One of my coworkers says that I may need Adobe Bridge to do so, is that correct? Otherwise a simple "pdf to jpg" (or other image formats) could solve the problem.
    Thanks for your support.
    Sebastian

  • Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

    Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • No sound when importing MTS files into Premiere Pro?

    Hey guys, I'm editing a film for my Drama Assessment at school. I used a Canon HD Camcorder which saves files as .MTS extension. My problem is that when i import the files into Premiere Pro CS5 there appears to be no sound???? CAN ANYONE HELP ME PLEASE!!!

    if you can hear the audio  with media player or with any other player in your computer then check settings
    EDIT--PREFERENCES--AUDIO HARDWARE AND CLICK ON ASIO SETTINGS.
    another dialog box will appear and in that under
    INPUT AND OUTPUT TAB
    MAKE SURE ALL THE OPTIONS/BOXES SHOULD BE CHECKED .
    DO NOT FORGET TO UPDATE TO 5.0.3

  • Importing Photoshop files into premiere pro CS6 issues

    Hi
    I recently re-installed Premiere Pro CS6 on my work computer (i changed from a HDD to an SSD). Ever since I did this I am having an issue importing .PSD files into Premiere.
    I try and import a photoshop file. The importer window comes up. The progress bar starts to move, then pauses and the Importer says 'Not Responding'. After a few seconds it comes back and throws up the following error:
    Error message - 'The importer reported a generic error'
    All projects i previously worked on that had .PSD files in them are now reporting these files as 'Media Offline' meaning I have to replace them with .PNG files which is really annoying.
    Any ideas what might be happening? The files I am trying to import are RGB .PSD's. They worked previously without any issues.
    I have Premiere Pro Version 6.0.5 (001 (MC: 264587))
    running on a Windows 7 machine with Service Pack 1, 64 bit OS, 16GB Ram and Intel Core i7-2600
    Many thanks in advance for anyone who can help me with this!

    Yes, MXF should play perfectly in PP CS6, but if you can't work this out at this point, you may wrap your MXF video to something intermediate. as a matter of face, Adobe Premiere Pro CS6 seems to work fine if you import your MXF clips directly from a camera or camcorder, but if have already copied MXF recordings your HDD or you downloaded them from somewhere else, the import error may occur.
    So i suggest you convert the MXF footage to something mezzanine we would recommend DNxHD.mov (if you are on a PC) or Apple ProRes .mov (if on a mac). those two intermediate codecs are good mezzanine codecs that handle recompression well and standup well in other areas of post-production (color grading, graphics, compositing, etc,). You can see what I wrote about the solution. "Why Premiere Pro CS6 can't import MXF files?" i hope that it is helpful to you.

Maybe you are looking for