Can i import indexes and constraints only?

i exported all the objects from one schema and now i want to import this file in two steps. first i want to import tables and data into a particular tablespace. after importing this i'll change the default tablespcae of the user and then want to import only indexes and constraints.
i tried but nothing happen... is this possible?

Thanks for your reply but i want to create a script to load all the objects once, but split into diff tablespaces..
i have 40GB data and i don't want to move objects manually from one tablespace to another tablespace....
the idea was something like that....
1) set a default tablespace to import tables .
2) then change the default tablespace to import indexes...
but it doesn't work....
if there is no way then i have to do something same you suggested me..
Thanks

Similar Messages

DM 3.0 Production: How to get only indexes and constraints to DDL?

I'd like to have a DDL file that contains all of the indexes and constraints of my model. From DDL Generation Option I only check all PK and UK constraints and all indexes and leave everything else unchecked. The DDL that I get is empty...

I'd like to have a DDL file that contains all of the indexes and constraints of my model. From DDL Generation Option I only check all PK and UK constraints and all indexes and leave everything else unchecked. The DDL that I get is empty...

HT204053 sir; i can't import song and videos from pc to my iphone pls help me

sir; i can't import song and videos from pc to my iphone pls help me

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - if you would like help then you will need to provide more information than 'can't import' e.g. how are trying to sync content and what happens when you do it ?
You have the latest version of iTunes installed on your computer, and your phone appears in it when it's connected to your computer ? If not then see if this troubleshooting page helps : http://support.apple.com/kb/TS1538
You should be able to sync music and films/TV programmes by selecting your phone on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via control-S on a PC) and then using the tabs on the right-hand side of the iTunes screen to select and sync your content
Is that how you are trying to do it and it's not working ?
If you haven't synced your phone to that computer before then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'syn' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Import Previews and Collections Only

GOAL: to export the Previews and Collections info ONLY on an old Lightroom catalog/computer and apply that info to same photos on a new Lightroom catalog/computer.
I'm moving my Lightroom Catalog from one computer that utilized multiple external drives to a new computer where everything will be on a single internal drive.
I copied over all of the photos to the new computer and did some re-organizing to group everything better.
I left the file structure within each Lightroom folder intact (eg., if I had sub-dvided photos into ten folders on the old Lightroom computer, those ten folders are the same, but I have put all ten into a new folder to enclose them all).
Ideally, I'd like to just bring in the previews and collection info and apply it to the photos on the new Lightroom computer. Since there are over 20,000 photos, I'd like to avoid having to export as a catalog with all of those originals. Is there a way to export ONLY the previews and collections info and then import that to the new Lightroom computer?
Thanks!

Chris G. wrote:
I cannot seem to get images to appear in the Import Window's preview pane, and thus cannot import them.
Any pointers as to what the problem might be?
I have occasionally had this problem and found either waiting a while or cancelling the Import and then retrying the Import (and being patient) works.
The workflow I use includes giving a custom master/version name to the appropriate images from the camera, such as "Judy in the Garden", importing those pics of Judy, and then supplying another master/version name, such as "Punch Drunk" for the appropriate images of Punch, importing those, and so on. So it can take many iterations to pull all the images in. Often the imports work as you would expect but then suddenly, nothing appears to happen and cancel and I redo it. My suspicion is Aperture is busy doing some housekeeping or other (or hung) but since a retry or two does the trick, I don't worry about it.

How can I import passwords and usernames from Google Chrome into FireFox using Mac OSX?

All of my passwords are in the Google Chrome browser, but I want to use Firefox as adblock plus is better for firefox. How can I import my firefox passwords & usernames in OSX easily?

You can't currently.<br />
Importing passwords from Google Chrome is not implemented.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=589589 Bug 589589] – Chrome profile migration for Import Wizard and Migration Assistant - passwords, form data, and settings
''(please do not comment in bug reports)''

I can not print black and white only documents and I have a full black ink cartridge

I have been an loyal HP customer since the orginal laserjet in the early 90s and then many inkjets from HP after that.
I bought an HP 6600 All in one for the house and have only ever printed in black and white.
For some reason one of the color ink carts is empty after a few months of black and white only printing.   No problem - I only print in black and white - or so I thought.
Nothing I have been able to do (aside from buying a color cart I don't need) is able to tell the printer to not worry about color and only use the black and white cart. Past inkjets from HP didn't have a problem with this.
Please tell me HP didn't do this on purpose and is going to trying and justify the need for me to buy any color carts if I never print in color. HP - if you did and you are going to try and tell me you neeeded to do this for any reason then someone please sign me up for the class action lawsuit if you are an attorney looking for plaintiffs.
However, I am sure I am overlooking some simple setting on the 6600 to move past this annoyance.
Thanks!

Hi Atlanta90210,
We appreciate your brand loyalty, and I'm very sorry for the frustration this has caused.
There is a lot of good information in Cannot Print When One of the HP Ink Cartridges is Empty. It explains how your printer works and how it is designed. Another good resource is posted here.
In the first link I mentioned, there are steps to print with black ink only. I have a similar printer to this at home (with the same print mech), and I have found that the steps to print with black ink only have saved me lots of ink.
There needs to be ink in all the cartridges for this printer to continue printing (after the cartridge's reserve mode is depleted). Once you have replaced the empty cartridges, you can change the print settings to print with only black ink so the printer doesn't use color ink. Until then, there is not a way to bypass this.
I know this is not the answer you were hoping to receive, but I do hope it was helpful.
I'd be happy to help you with any other questions or concerns.
-- ReverseTalk
I work on behalf of HP.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if I solved your inquiry.

I tried to instal lion but my iMac says "install fail because hard drive is damaged and can't be repaired" and my only option is to restart and it immediately tries to download it again, won't let me back to any other screen. Is there anything I can do?

I am trying to install Lion and I keep getting a fail message that says "Mac OS X could not be installed because the disk Hard Drive is damaged and can't be repaired". It only gives me the option to restart to try again but fails every time, an no other option. Is there anything I can do?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Can I import contacts and calendar into iCloud?

Here's my situation: I have a ton of contacts and calendar items on an old Powerbook G4. It's old enough that I can't upgrade to OSX Lion, so therefore I can't use it to sync with iCloud. But I am getting an iPhone 4s, and want to figure out how I can get those contacts and calendars on the phone, hopefully using iCloud as the intermediary.
Is there a way in iCloud to do a one-time manual import of a contacts or calendar file? I could then synch the new 4s with iCloud. I'm eventually going to get a new desktop, but in the meantime need to use the 4s as a standalone device.

iCloud Control Panel for Windows.

So. Is it true you can't import ratings and adjustments from XMPs?

Is this for real?
I have waited 5 years for Aperture to allow the importing of XMPs, and I finally got it. Yea!
But now I am learning you can't import the data from any adjustments or ratings?
true?
Why?
Am I having a nightmare?

Likely so.
Even easier would be for them to export the entire project and deliver this to you. I do this all the time, and it works great. File->Export Project, and you get a nice, atomic thing that you can import to your library and get everything in one swoop.
This does of course rely on them using Aperture, and they need to be on the same version you are (i.e. if you're on 3, they need to be on 3 as well).

Can't import mov and mpg files into cs5.5

Hi
When I import a mpg file into audobe premiere cs5.5. I get the message:
There was an erro decompressing audio or video
When I import a mov file into audobe premiere cs5.5. I get the message:
Importer reported a generic error.
Good news is, that I have simply imported both files in the past without any troubles. So I hope it is something very simple.
Maybe I have somewhere codec installed in the past (k-light) and something now doesn't work that well anymore.
But I don't know if I have done this anymore and a desktop search didn't deliver me any results.

I've installed Premiere Pro now on a different windows7 platform.
Still the same. Can't import the mpg file. Somehow the mov file works here so that is something.
Anyway I thought maybe it is helpful to share some data about the video:
Container:
DVD "VOB" format
MPEG-2 Program Stream << { 1 vid, 1 aud }
Sys Bitrate: 10080 kb/s VBR
Audio:
AC3
0xbd[0x80]:48000Hz 256 kb/s tot , stereo (2/0)
Codec(s) installed (zegt Gspot)
Video:
Codec MPEG2 Name MPEG-2
Codec(s) installed (zegt Gspot).

How can I import NEF and JPEG in Aperture at the same time from my D200

I have my D200 and shoot in RAW and JPEG.
why is it when I import in the library that I only see the NEF files and not the JPEG.
I want to import both the extensions, because I shoot all my pictures in RAW and JPEG and I only want to store the 4 and 5 stars rated pictures in NEF and lower rating I want to store just as JPEG.
Thanks for any help, Frank

You assume that I speak and write Dutch.
My apologies to all of you who don't/cannot read/understand Dutch. The following is in Dutch and not Double Dutch.
It explains in some detail how to setup a workflow in Automator for separating RAW and JPEG files and importing the result in Aperture.
If someone wants the explanation in English: post a message.
Ga naar
http://www.completedigitalphotography.com/?p=408#more-408
en haal de Separate Jpeg's action.
NB. Ik ken alleen de Engelse namen van de mappen.
Plaats de Separate Jpeg's action hier
~/Library/Automator
Automator
Automator opstarten
Kies Bestand, Nieuw
Paneel Library: selecteer Finder
Paneel Action : selecteer een sleep "Separate Jpeg's" naar Workflow paneel
selecteer en sleep "Get Folder Contents" naar Workflow paneel (einde)
Paneel Library : selecteer Automator (PAS OP: Automator wordt geladen; weg ermee)
Paneel Automator: selecteer en sleep Import Photos naar Workflow paneel (einde)
Opslaan als Finder Plugin in de map
~/Library/Workflow/Applications/Workflows/
Gebruik
Selecteer een map in Finder die RAW and JPEG bevat.
Ctrl-Click of rechts klikken
In het context menu navigeer naar Automator
Selecteer Separate JPEG's
De rest gaat nu automatisch
Succes
Berend

How can I import video and sound from my sony camcorder?

I have just bought the mac. I'm struggling to import video AND sound from my Sony DCR-SR87 hard disk handycam camcorder. From what I've read already, I ended up purchasing and downloading Quicktime MPEG2, and used the Utility MPEG Component Lion from downloaded MPEG Streaming 1.9.3b6 to enable video and sound to play on the computer directly from the camcorder. The problem is that when I import these clips using iphoto (it pops up when I connect the camcorder), the sound does not accompany the video onto the computer. I've hit something of a brick wall and would really appreciate any help.

OK, according to
http://support.apple.com/kb/ht3290
your camera is supported by iMovie 9. Perhaps the question is better asked in the iMovie forum. Would you like me to ask a moderator to move the thread?

Can't import songs and ones in library only play for 45 seconds

I'm in the process of moving my music collection to a new computer with a bigger hard drive. I installed the latest version of iTunes on the new computer, copied all the folders and contents of the itunes folder to the new computer in the same location.
I bought a couple new songs successfully but now I can't add any of the files from my previous computer to the new library. I was able to import a few songs that iI purchased when on my original machine but now they only play for 45 seconds and jump to the next song in the playlist (if check) And now when I drag and drop songs on the Library to import them absolutely nothing happens.
And yes, the new computer is authorized and the permissions on the folders are read / write.
Any one have an idea of how to fix this? If not, I just going to burn all my songs to CD and import them that way and say so long to iTunes... just too much BS to just move a music library!

Sounds like the PC's authroization file is messed up, or else the iTUnes preferences files.
Follow the directions in this article, the SC Info file holds the PC authroization for iTMS songs.
iTunes Does Not Open After Upgrading
And also deleted these 2 preferecnes files:
C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iTunes.pref
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\iTunes\iTunes.pref
They will all get rebuilt when you open iTunes the next time. It should ask for authorization one last time, is all.
Message was edited by: Katrina S.

Can't import users and group backup

I exported the list of user names and groups prior re-installing 10.6 server.
Now when I try to import the backup, I get the error:
"The following users could not be imported because each of their first short names contains an invalid character (such as a period.)"
followed by the list of my users.
According to Apple's user creation documentation, the following characters are allowed:
"For the first short user name, use only these characters. Subsequent short names can contain any Roman character.
* a through z
* A through Z
* 0 through 9
* _ (underscore)
* - (hyphen)
. (period)"
Is that a bug? is there a way around it ?
Thanks

I am also encountering the same problem. Can anyone assist?? I had to demote my OD due to a DNS change and lost 200+ accounts unless we can find a solution.
Thanks for anyones suggestions.

Can i import indexes and constraints only?

Similar Messages

Maybe you are looking for