Can I import Red Dragon footage into After Effects?

I keep getting the error that the format might be unsupported, but I thought that Dragon support was part of CC?

> " I thought that Dragon support was part of CC"
Where have you seen that for After Effects CC? I can't find any public mention of that, except in discussions of what's coming in a future version due out soon. Premiere Pro CC (7.1) added RED Dragon import, but camera formats very often start in Premiere Pro and then get integrated into After Effects next.

Similar Messages

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

Problems importing iPhone 4 video into After Effects CS5 - Audio sync out

Hi there,
I am currently experiencing problems trying to import iPhone 4 video into After Effects CS5.
Firstly i'd like to note that the video plays perfectly fine on the iPhone, VLC and in Quicktime Player. The audio and video is in sync.
When I add the footage to After Effects the video becomes slightly out of sync with the audio. I have noticed this in RAM preview and also in renders I did just to test.
I also want to note that, both my iPhone and After Effects have latest software updates.
Thanks for your help

Thanks Rick and Mylenium
Thanks that worked!
I thought that changing the frame rate in the composition settings would have worked.
Instead what I should have done is to go the the footage in the Project Panel then right-click on the footage > Interpret Footage > Main... then Conform to frame rate: Frame rate: 23.986607 (or whatever more accurate frame rate your footage actually is)
I used the more accurate frame rate reading from VLC which went to 5 decimal places. I got that info from the top menu in Tools > Codec Information
Its a shame AE doesn't pick up on the more accurate fps. It seems that all the videos from my iPhone 4 have slightly different frame rates and I guess I will have to interpret each clip properly.
I hear that the frame rate on the iPhone 4 is different depending on the lighting? I wonder why that would be the case?
Hope this helps anybody else that might face this problem.
Cheers

Bringing Premiere ultra keyed footage into after effects with key intact

It there a way to bring in footage I keyed using Premiere ultra into After effects? I much prefer the ultra keyer over anything native to After Effects CS5.5. If not, how do I export and keep intact the aplha channels from the keyed footage into after effects? Thirdly, if I have to, how do I remiove the black background I get as a result of a default quick time movie file?

You can not export a clip with alpha from PPRO.
Easiest way is just doing the key in Keylight - AEFX ( which is far more powerful and flexible than Ultra Key . As good as it is, it has its limits)

I need help with Importing my Illustrator file into After Effects, I'm having problems

Hello everyone, I'm new to this forum. I am having a hard time importing this Illustrator file into After Effects. Here's how it is in the Illustrator file
As you can see, I made all the layers separate so then when I import it I can work on each and every one. (I want them to bloom from the center)
but when I import to After Effects (I ask to import the composition and retain the layers), the size looks completely different:
Then when I drag down the layers folder to the Comp Panel, the layer order starts getting really messed up. Here is what I am talking about
What am I doing wrong and how can I fix it? Also how can I figure out how to let the petals boom? I'm thinking of scaling the center larger first and then scaling the petals from there. but first I have to figure out how to get the size distortion and the layer orders right. Thanks.

You need to open the comp not drag layers in a new comp.

Problems Importing Premiere Pro Project into After Effects

I've got my first Pemiere Pro CS6 project completed. Now i want to import it into After Effects CS6 to add titles.
The PR file includes two segments, two still photos and two AE compositions. I am trying to import the PR project into AE two different ways:
1. File>Import> Adobe Dynamic Link>Adobe Premier Project. When I do this, the project looks great in the Footage tab of the RAM preview window on the right. But when I make a new sequence to get it on the Timeline so that I can begin to add titles, I get only blackness in the Comp tab of the ram preview window whether I am playing a RAM preview or a spacebar preview.
2. File>Import> Adobe Premier Project. When I do this, the two AE segments are missing.
I am on an iMac with OSX.7.4.
Can anyone give me some advice on the best way to do this?
Thanks!
--Carol Gunn
Gunn Graphics
Austin, TX

You will need to render out those two AE compositions to video before you can bring them back into AE through dynamic link. If you are concerned with making changes, you can always replace footage in Premiere with a new render.
Dynamic Link is just not designed with your workflow -- AE doesn't open multiple projects at one time, and your workflow ends up with AE trying to open 3.
You can bring those two compositions into AE as imports. They won't be linked together (so any changes in original project will not reflect in imported version) but you would have all 4 elements in one AE project.

Importing Premiere Pro project into After Effects ???

When I import a Premiere Pro project into After Effects, it splits every shot onto a new track, ending up with a couple of hundred tracks at the end.
Is there a way to avoid this ?
Particularly, since I'd want to keep the option of bringing the project file back in Premiere for further editing.
My colorist suggested that I nest reels of my timeline and split it that way so that when he imports it he has nests on one timeline and the multiple tracks in each of those nests. Still, this feel very clunky.

An editor at work was using our Avid to do a grade on a short promo and I
wanted to see what I could do in After Effects. So when he was out of the
office I exported the timeline as an AAF and copied the OMFI media. When I
brought the project into After Effects I ended up with a massive number of
layers and freaked at first at the idea of doing anything with it.
However I thought about it again and decided to precompose all the layers,
as this gave me just one layer to work with. I then added a couple of
Adjustment Layers above it; one with a Levels effect added and the other
with HSL. I also added Masks to the Adjustment Layers so I could vignette
any effect.
The key to working like this was to use Hold Keyframes at the beginning of
each new shot for each effect, Mask Shape and Feather. I could then adjust
that shot, scrub to the next shot add new Hold Keyframes adjust that shot
and so on. When I wanted to repeat any effect settings on a shot, I just cut
and pasted the relevant keyframes. Mixes across shots can be tricky but you
can always go back to work with the original shots on their separate layers
if you need to.
I ended up with a quick grade that stood up nicely against the one done on
the Avid and I only had work with 3 layers on my timeline!

Problem importing adobe premiere project into After effects CS6

I've been working in Adobe's premiere and after effects for quite a few years now and this problem is new to me.
I'm working on a project in After Effects CS6 and want to import a premiere pro project into After Effects. I go -> File -> import -> adobe premiere project
Select project
Select sequence
Now After Effects CS6 imports all files from the premiere pro project like before in CS5, but now also imports the videofiles as sequences at the root in my project panel and messes everything up. Before it usually imported nice and tidy with the same folder structure as the premiere pro project would have.
But that isn't the main problem. When i open the sequence i wanted to import and work on, some clips have been shortened down to 1 FRAME LONG at the end. These clips have a 500% speed in premiere pro, but this has never been a problem before, after effects has always before been able to translate the speed variations in clips from premiere -> after effects.
The adobe premiere project that was imported is a 60 sec promo with various clips in various formats (Gopro h264, dv pal quicktime etc). Footage not exceeding the fair amount that after effects should handle. 15-20 videfiles at 30 sec each.
I've never had this problem before with premiere <-> after effects.
Anyone?

I just found the solution!
In my adobe premiere project that i was trying to import, some of the clips were "right clicked" and applied "Scale to frame size"
Every videoclip that had "scale to frame size" in my adobe premiere pro sequence would import as its own composition in After Effects rather than just a videofile, and some of the clips would be trimmed down to be invisible.
So if you have any problem with a clip not importing correctly into a sequence in after effects, check to make sure "scale to frame size" is not applied to the clip in premiere pro.
I removed the scale to frame size in the premiere project and now everything imports fine into after effects.
Sorry for the post.

After I import a .swf's into After effects the content disappears!

I have been using this work flow for sometime. I hand animate a sequence or a still of a character in Flash Pro on a single timeline, no scipts, etc just clean keayframe animation or a single frame.
Then export the sequence as a .swf.
Then usually import it into After Effects and use the vector output in my AE scene.
After completeing an animatic for a client last week all the swf's in my AE project are EMPTY. I tried re-exporting from flash and reimporting into AE and again they show up 1st time but if I close and reopen the project they are GONE again!!! Help I have been doing this same process since CS4 and I have master animations in AE files that I'm now scared to death to open because AE will make my work vanish...

I'm having the same issue since updating to cs6. Have always used this workflow seamlessly until now. Some info:
CS6 Production Premium
All lastest updates installed - yes
Windows 7 home Premium
Processor: Intle core 2Duo CPU E*400
6BG RAM, 2 drives (AE running off ssd)
No external HD attached
Sometimes, but usually not running Flash and AE at the same time
No error messages
.swf's play fine in their own right outside of AE
No special filters, effects of third part plug ins operating
On save, some (not all) swf's lose some content. Its always the same content. Every time AE is closed and reopened the the same stuff is missing. Only fix so far (which becomes extremely annoying) is to rename the .fla and export a new .swf. It lasts until the next close/open.
As far as I can tell, it targets non-symbol assets moreso that symbol assets, but converting the problematic parts to symbols in Flash does not rectify the problem once it has presented itself.
Suggestions?
Amy

Importing RED camera footage into CS4

I've downloaded a plug in for CS4 and all the other RED camera footage imported in fine (9 out of 10 files) expect for the last file. Here's a picture of the file names:
When I try to import these files (either through file > import) or Media Browser I get the message that the file format is not supported. Does anybody have any idea of what I could do?
Thanks!

Robodog2,
I finally got back to my office and was able to send JIm a screenshot of the issue as the file was too big to send (1GB).
The file marked A010_C001_10172V_001.R3D is the one that should import into Premiere Cs4 but as you can tell from the screen shot above, it will not.
Any help will be appreciated.
-Dave

Importing Illustrator layers into After effects, released to layers yet still one layer- ?

Hi,
Please bear with me as this should be a simple fix but the situation is hard to describe.
I want to import layers from Illustrator into After Effects. I need the AI layers to have their "handles" (the four corners of the object) close in around the object and not spread out to the corners of the composition. I figured out how to do this: by "releasing layers to sequence" in Illustrator and then dragging them out of the group they were all in. Then I "import as composition - retain layer sizes" into AE. When I open the illustrator composition in AE, it's layers appear in AE as separate layers and with the layer 'handles' tight around the objects (all is well). BUT here is what I want to do: I have a layer/object in Illustrator that I "image traced" to make it black but it still has some white parts to it. So I drew two black rectangles around the white parts. But now when I bring it into AE, they all appear as separate layers (the image traced object and the two rectangles) but I want those black rectangles to be literally part of the object that I image traced. In photoshop this would be akin to "flattening the layers". I can do this in AI by "merging" the layers, but if I do that I am brought back to the problem of having AE put the layer's 'handles' to the corners of the comp window and not tight around the object. Frustrating!
So I basically want to be able to paint over/cover up the white parts of my object without that creating new layers/objects.
Thanks for reading!
T

I'm not clear what you are describing. Have you actually tried other import settings in AE? There is some bug with the retain layer size stuff, but other combinations might work. Also try exporting a PDF of the artwork and using that. This may work better.
Mylenium

Error importing a PNG into After Effects CS6

I'm trying to import a .png file into After Effects CS6 (version 11.0.4.2) and keep getting this error message:
Followed by this one after I click "OK":
The .png imports fine into After Effects CC so I don't think the file is corrupted or anything like that. I need to make some motion graphics using Trapcode though and I only have that for CS6 so I'm stuck at the moment. Why is this happening in CS6? If there's no solution I guess I'll have to pay for the Magic Bullet upgrade and just do it in CC but it would be great if I could just figure out why this is happening in AFX CS6...
Here's what I'm running:
MacBook Pro (Retina, 15-inch, Mid 2014)
2.8 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
Thank you!

No it was just a .png I downloaded from a Google image search. This is it: http://naturalearth.springercarto.com/ne3_data/8192/masks/water_8k.png

.AVI files into after effects do not work? how do I fix?

When I record with my vivitar dvr 840xhd camera, and try to import the files into after effects. The files import into after effects just fine, except the little icon of the video is all grey. But when I put it into the comp and try to view it. The whole video is only a black screen. I try to watch it and find out that the audio works in it. but not the video. Throwing it into media encoder and trying to convert it only does the same thing, just a black screen with audio. But when I play the file on windows media player it works just fine. I have After effects CS5 and I run windows 7. Anyone have any good anwsers? Perferably one that does not reqire another program video converter to put it into the file type I. I tryed that before with many other video converters. I either loose quaility. If im filming in 60fps, it is reduced to 30fps. I can only convert so much in one clip. And most leave watermarks. I would much rather be able to import these .avi files into after effects without the wait and annoyance of a 3rd party program. Thanks for the help.

Anyone have any good anwsers? Perferably one that does not reqire another program video converter to put it into the file type
Probably not. AVI is just a generic container format and without any more info we will not be able to give you any proper answers. Even their website doesn't give any specifics. Use GSpot or MediaInfo to find out what CoDecs it is using exactly. Since the camera is based on Flash memory, though, I already get this ugly feeling it is using some atrocious non-standard MPEG4 derivative nad that would mean there is no chance at all to use it directly in AE...
Mylenium

Importing a Premiere Pro Sequence into After Effects Crashes After Effects

Hello,
I'm on a Quad Core Mac, 2.8GHZ with 6GB of Ram.
I have a Premeire Pro project with varying MOV and MP4 files; from a DSLR and from a Sony EX-1 camera. This project has lots of media, over 3 TBs, and each and every time I try to import it into After Effects-After Effects crashes and does not respond.
Please help.
Thanks

Don't try and do a whole movie in AE. After Effects is for making shots or short sequences. Break up the projects. Organize. 3TB of source materials into AE's Project folder means linking, analyzing, interpreting, and generating previews for enough material to shoot a feature film. Bring in the shots you're working on, not the entire movie. If you need to do an entire movie, break that up to Scenes and make each scene a separate project.
Terabytes of data would also choke Final Cut Pro, Premiere Pro, Avid, or any other NLE if it was dumped in all at once. The only reason that a NLE can handle that much data is that there were some caches created when the footage was imported.

Trying to import boujou .ma tracking data into after effects, seems like it doesn't support the file.

I have tried everything to try and get this to work; i have tried multiple settings in boujou, i have imported the .ma file into maya and exported with baked keyframes and only the camera selected etc. I don't know what i'm doing wrong. I am wondering whether Adobe has cut support for .ma files altogether, which is a real pain in my *** as the built in 3d track just isn't good enough. I have tried dragging the file into after effects, i have tried importing it neither of which do anything. The .ma files don't even show up, i have to select 'all files' under the file type when i choose import to even see the files, and when i click them it doesn't recognize it as tracking data, it'll try and import it as a .PNG file or something. I can't seem to find any plugins that would enable me to import .ma files. I just need that tracking data as a Camera in my scene and i don't care how it is done. Additionally, i have tried exporting as a .txt file and copying and pasting that data into a camera, which doesn't work (unless im doing it completely wrong).
Thankyou for reading

I also experience this problem. My mp4 clips has been taken with a Samsung NV24HD camera and are HD (720p). I haven't tried to convert these clips but I think it should not be necessary since I can play them in quick time. However I have perian installed, perhaps that's why they play in quick time? The next question is then: Is there a similar plugin to iMovie?

Can I import Red Dragon footage into After Effects?

Similar Messages

Maybe you are looking for