Can i import unix executable files into iMovie?

I have old videos that were put on dvds using go-video. They are unix executable files, I don't know how to import them into imovie. Am I missing something?

I got mixed up. The Unix files were made on Toshiba DVD recorder.
Sorry,
Daniel

Similar Messages

How to import unix executable files into Final Cut Pro

A friend wanted me to create a Halo 3 Montage Video for him. He loaded the saved clips onto a flash drive for me but when I put it into my computer the information comes up as Unix Executable Files and I don't know how to import them into Final Cut Pro 7.0.2 or if it's even possible. Any help would be much appreciated. Thanks.

Ok. Well, I plug in the flash drive. When it opens there's a folder that says XBox360. When I click on the folder there are 9 files listed that say Data0000, Data0001 etc. The preview option shows a gray folder that says Exec on it and the only information I can find is that it's a Unix Executable File. When I click on more info option everything that pops up is what I've already told you. I tried opening it in the VLC Player but nothing played which makes me think there aren't video files on the flash drive. When I click on the file to open it the Terminal Program appears and lists basic information about the file.
Is there a program that can take these files and covert them into something that can run in Final Cut Pro? Or is that what VLC is supposed to do?

How can I import a powerpoint file into imovie?

I am trying to import a powerpoint presentation into imovie keeping the transition times. Can you help?

How to add a Powerpoint presentation to iMovie:
http://www.wikihow.com/Add-a-PowerPoint-to-iMovie

Can't import mp4/mov files into iMovie

I tried to create a new project by importing a .mp4 file from my account on Youtube. It copied the file to the event but didn't create a thumbnail. I did some research and I tried:
-Quitting imovie, changing the name of the event folder, then restarting imovie.
-Importing the .mp4 to a different event folder. Quitting/restarting.
At this point, the thumbnail for the newly imported movie appeared but the other videos that were previously (and successfully) thumbnailed in that event disappeared. I quit/restarted iMovie and all the thumbnails in that event were missing.
Here's what I've tried since then:
-Converting the .mp4 in Handbrake to .mp4 and then importing again. No luck.
-TRYING to convert the .mp4 to .mov in mpeg streamclip. I get an "Audio Decoding Error" when I attempt.
-Converting the .mp4 to .mov while disabling the sound in mpeg streamclip. IT WORKS and iMovie is able to import AND thumbnail.
So it'd appear that there's something wrong with the audio in the .mp4 file. Tried other .mp4 files and none of them were able to be converted or imported. Tried extracting the audio from the .mp4 file via MPEG streamclip and there's the same "Audio Decoding Error." The audio on the .mp4 file is AAC.
OK... It'd appear that I'd need to just import the .mov (no sound) along with the audio from the clip (I've used AudioHijack for that) to edit both in iMovie. The problem is that when I try to export it in iMovie I receive error codes.
This just all seems way, way more complicated that it needs to be. Does anyone have any suggestions on something I haven't tried yet or perhaps some video editing software (non FCE) worth looking into?
Thanks

I was currently having the same issue trying to import into imovie. I have EyeTV Hybrid and when exporting a movie it asks you to select format in which to export it in. I selected m-peg4 and when I tried to import into imovie it was grayed in the finder, so what I did was return to the export feature in EyeTV and exported again under a different format - for imovie. It's exporting as we speak and I feel this will allow me to import properly now. Hope this helps.

Importing FCP 4 files into iMovie 4

Can this be done? I captured a lot of video to FCP 4, but the learning curve is more time intensive than I thought. Would now like to do the project in iMovie 4. Can I import the FCP files into iMovie, and if so, how is this done. BTW, I'm talking about nine hours of video.
Thanks,
Nick

"Good point."
... and a well known for years, up to iM 4.... did some research on that, and the reason I found was the file system of System8 (eight!)....- so, using the 4th version of that wonderful app with 10.3 was limited by the file management of the pre-pre-version of the system ....
I will never forget that

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

How can I import an AVCHD file to iMovie 11?

How can I import an AVCHD file to iMovie 11?

Support for eps was removed from Elements 11:
Supported file formats

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

I have OSX 5.8 and I used imovie to create a DVD. Can I import the DVD back into imovie?

I have OSX 5.8 and I used imovie 09 to create a DVD. I have deleted the project. Can I import the DVD back into imovie in order to edit it?

How to Import DVD to iMovie Free to Create Your Own Videos
http://www.macxdvd.com/mac-dvd-video-converter-how-to/import-dvd-to-imovie-free. htm

How can i import an excel file into formscentral?

how can i import an excel file into formscentral?

Thanks for asking. This is not something we currently support but you can add or vote on feature ideas:
http://forums.adobe.com/community/formscentral?view=idea
If you need to add a new idea click "Create an idea" under "Actions" in the top right.
Perry

Can I import a *.mov file into iPhoto?

Can I import a *.mov file into iPhoto? If so, how?

Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import

How can I import a pdf file into numbers so it will open with a click

How can I import a pdf file into a spreadsheet so that it will open with a click?

You can link to a webpage or an email in Numbers-- that's it.
The best way I found to do this is to enable websharing on your machine (see this article if you are running 10.8: http://lowendmac.com/crews/12lc/web-sharing-mountain-lion.html)
You can then place your pdf files in the folder /Users/<your user name>/Sites/<somefolder>
Then link to this using the url "<your machine name>.local/~<your user name>/<somefolder>/<pdf Name>
My machines name is "Proton" (you can get this from the System Preferences > Sharing pane)
My user name is "wayne"
so I stored a pdf file (DM00027543.pdf) in the folder "/User/wayne/Sites/PDFTest"
and stored the URL "http://proton.local/~wayne/PDFTest/DM00027543.pdf" in the "URL" field of the Hyperlink inspector

I can't import my iTunes files into pages, how can i fix the privileges problem?

when i try to import any mp3 file into a pages document, i get an access privileges error saying it is either corrupt, damaged or "can't be used" because I don't have access privileges. This has happened since I moved my iTunes library to an external drive. Anyone have any solutions? The privileges on both the library folder, and all its files are set to read and write for sharing and permissions.

If you do not have done so, set the "Ignore Ownership" flag on the external drive. YOu can set this flag from the "File > Get Info" panel for the drive.
How is your external drive formatted?
Can other applications open these mp3 files? QuickTime? Do they play in the Finder preview?
Do the filenames contain special charcters?
Léonie

Can i import unix executable files into iMovie?

Similar Messages

Maybe you are looking for