Can I include a "SelectionsDynpro" in a Subscreen Area``?

Hello at all,
i have a questions about Dynpros/ Selections???
I have a "normal Dynpro" with one Subscreen Area.
In this Subscreen Area i want include another Dynpro, which is defined by "SelectionsDynpro".
Is that possible??
With Kind regards
ETN

Hi,
Please check if this one is ok for your requirement.
You say you havent been able to include a selection screen in your subscreen. What you can do is, place a table control, remove the headers and make it look like a selection screen. You can add the parameters and select options by defining it in the program and using the 'Add from Program' button. Let say you have placed a table control with three columns. Let the first column be for the selection screen text. Try to populate them in the PBO manually.
When you are using a parameter, disable the third column cell so that it acts like a parameter. For the select option, you can leave the third column enabled, so that it acts like LOW and HIGH. For an F4 on the parameters and select-options on the table control, you can find a lot of threads on how you can implement an F4 differently for different rows and different columns.

Similar Messages

Can i include gr/ir account in 3keh trancation code

hi
can i include gr/ir account in 3keh trancation code for transferring balance sheet items to profit center accounting.
thanks,
monica

Hi,
- not sure why you want to include a clearing account in 3KEH
- use 1KEH for material/stock balance transfers
- use 3KEI as an alternative
Rgds.

How can I include my business email fonts on the ipad signature?

How can I include my business email fonts on the ipad signature?

It's a lot easier with Photo Manager Pro.
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc. Can anyone help?

I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc. Can anyone help?

Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

How can I include different DAQ cards (for notebook and PC) in one application?

I want to build one application, which runs on different computers. On PC a DAQ board PCI-6052E and LabVIEW including application builder are installed and work. My program runs.
Now I want to build an application, which runs on the notebook without LabVIEW but with the similar DQACard-AI-16XE-50, too.
How I have to install the DAQCard on the notebook and how can I include the driver?

Sylke,
Check the following link which guides you step by step to install the driver and configure the daq board:
http://www.ni.com/support/install/
Hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

HT201250 Can I include external drives to be backed up using Time Machine. Not only do I want to back up my IMac, but I have several extenal drives for one iPhoto, one iTunes and one for other files & documents.

Can I include external drives to be backed up using Time Machine? Not only do I want to back up my IMac, but I have several extenal drives for one iPhoto, one iTunes and one for other files & documents. How do I know if they are included in the backup process?

Yes, if they are not exclude then TM backs them up.
Allan

I have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

i have a mac book pro, an ipad and an iphone. i have an icloud account that allows my iPad and imac to sync. but my mac book only has a connection to 'mobile me'. how can i include my macbook with my other devices? help! thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

How can I include a carriage return in a expression

How can I include a carriage return in a expression between text strings eg
Expression 1 = Text1 & text2 & text3 & text4
I need to display it as below
Text1
Text2
Text3
Text4
adjusting the box the size doesn’t work as the text strings are variable lengths

Message Edited by Ryan.S on 01-04-2007 08:17 PM
Ryan Shi
National Instruments
Attachments:
untitled.JPG ‏37 KB

How can I include results of a subsequence, which runs in a new thread, in the main sequence test report

Hi!
I', m working with TestStand Version 4.2.1. I have a main sequence, which calkls different subsequences. All these steps are properly reported. One of subsequences runs as "new thread". How can I include its results in common test report of the main sequence?
I have markes variables of the subsequence as it is requred for test report (it works OK if it is not a new thread). If the the numerical test, which is executed in this subsequence is correct, I get no results at all. If the numeric test failed I get somewhere in the main sequence report a "red message", that test failed whithout any reference to the step or values of vaiables which were not correct.
I tried an option "On the fly" in the Report Configuration , but haven' got any useful results. What shall I do?
Best regards
Solved!
Go to Solution.

Hi,
I tried it but without success:
1) I got a reference to the Thread as "Locals.Step1=RunState.Thread" for every of 2 steps which start a thread
2) I put both "Waits" after steps with (and without) threads, at the same place, where they were before
3) The sequence run OK, but when it came to Wait for Thread 1 it waited for ever, I had to terminate sequence
Does it mean, that I got a false reference (suppose No - please, have a look at attached pic)?
Or does it mean, that Waits are badly placed in the sequence (threads are already terminated)? Here is a pic of sequeces calls with Wait after them.
Regards
Attachments:
Thread.JPG ‏34 KB
SequenceCall.JPG ‏32 KB

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

Can i include external usb drives in Time Machine backups

Can I include external usb drives and sticks in Time Machine backups?
This was the question I searched a week for. My machine is a MBAir with Yosemite. I have a bunch of USB HD and sticks. This is a sharing of what it took to solve. I lost a couple of important document revisions lately because of not having differential backups on them, so wanted to include them in Time Machine.
Yes it can, I found. But it's a wee bit backwards. And apparent inconsistencies drive you crazy. Time Machine is supposed to do this by default, and wants you to tell it what NOT to include. Trouble is, formats create many troubles.
But the USB sticks and HD's you buy are PC formatted. And you'd like to share, as the Apple does with FAT16, FAT32, and exFAT (to overcome the 4G size limit on the others). Even NTFS can be plugged in and be read-only. Turns out you just can't incorporate into TM backups.
Open Time Machine Options, and look at the drives listed in the exclusion window. Drives that you know to be plugged in and registered by Finder, may or not be registered in the exclusion window, and if registered and their icons may be bright or dimmed. Bright will NOT be included. Dimmed are excluded. Normally the operation is to use the or to exclude these drives from your next BU operation. (this instruction is lost the next time in manual mode). So if a drive or stick is shown and is bright it WON'T be backed up. If you it from the window, then it will grey out and WILL be backed up. If it's not there to offer you exclusion, you can browse to such a file or device so you can exclude it. TM's exclusion window will show the PC formats: FAT16, FAT32, and exFAT greyed out (as not included). NTFS is bright looking like it might work, but when doesn't dim, it disappears, and is ignored in the actual BU.
Sources are supposed to be included in the backup if it isn't shown bright in the exclusion window. In this respect I only use TM manually, and not for programmed BU's, so I cannot speak to that.
If everything you have is formatted for the Apple disc system (Mac OS Extended) then there are no contradictions or partial equivalences. The mounted disc or stick will show in TM exclusions window, and if you it, you'll see it in the Time Machine pile of calendared directories, with all the files. And of course it will do the differential backups for it that we use TM for in the first place. Just remember to prepare the BU by not excluding.
BUT NOW THE VARIABLES. It now depends upon the formats. I use the Paragon NTFS program to permit writing NTFS. (Apple can normally read but not write NTFS). Paragon is lovely because for normal computer use, I can read and write both Apple and PC files and disc formats in Finder (for 3 years now). But Time Machine cannot be reached by Paragon so it's NTFS behaviors are outrageous. Paragon reaches Disk Doctor so you can read, write, format and heal both Apple and PC formats. And this really confused things respecting Time Machine. I literally worked through every variable, from stick to disc to prove what did work, and when false appearances of working showed up.
Respecting that very Time Machine display of Finder windows piled backwards through time there's a confusing bug. When first opened, TM shows NOW as the current setup and works just like a Finder window in present time. And the outboard discs and sticks show as in Finder. BUT working back in time, the left window DOES NOT SHOW THE CONDITIONS AT BACKUP but rather in all left windows shows the present setup. So you need to work from the right hand side dates and times to go back and see when you had that stick or HD plugged in. And then, finally, you will see the files you wanted saved. But if there is a stick on the left than TM doesn't like but Finder likes you'll see it left but nothing will be in the files. Clicking on the pretender just jumps to the root.
My Disk Doctor provisions (with Paragon) show, Mac OS Extended (Journaled), Mac OS Extended (Case Sensitive Journaled), MS-DOS (FAT), exFAT, Windows NT Filesystem, Windows NT Filesystem (compressed). It's a better utility than in Microsoft and I use it for such maintenance.
Bottom line, I like TM very much. 2 years ago I lost my air and TM was able to reconstruct my machine many times in the course of the troubleshooting - all the way from the start to the last without ever missing a beat or a file. So I accept this limitation and make copies to another HD formatted in NTFS when I work on PCs.
Hope's this sorts out being lost in the desert for a few of you.
Jock
<Personal Information Edited by Host>

Storing normal data files on the Time Capsule is unfortunately not as easy as dropping the folder on the Time Capsule.
Open up Macintosh HD on the Mac
Look for the SHARED heading on the left
Click on the Time Capsule icon and a folder named "Data" will appear (unless you have renamed it)
Double click the "Data" folder to mount the drive on the desktop. You may need to enter the device password for the Time Capsule when you do this the first time
Once the drive icon is on the desktop, you can drag data to the icon and drop it there. Double click the icon to open up the drive and see the files

Smartforms: how can I include a jpg picture stored an a web server ?

I want do include a business graphic (JPG) in a smartforms window. The picture is created by a web serves and stored on a web server.
the jpg-picture can be loaded on by an http-adress.
How can I include the picture in the smartforms form ?
thanks
Richard

hi,
use transction SE78 to upload the picture .
Then use it in smartforms.
regards,
guru

How can I include merged projects in the printed documentation?

I have a master project with several merged projects. This works splendid with online documentation, but when I am asked to provide a printed version, it seems I have to create separate documents for each merged project.
Is there any setting or fix that enables print also of merged projects and topics when I create printed documentation?
Pretty please with sugar on top :-)

Hm - there is a contract with the customer, saying that he wants documentation both as word and pdf, and as we now aim at only writing online documentation, these tasks create extra work, as we are delivering updates each month
But yes - two beasts, where only chm is actually needed we think.
-Tone
Date: Tue, 3 May 2011 06:53:04 -0600
From: [email protected]
To: [email protected]
Subject: How can I include merged projects in the printed documentation?
Hi there
I'm a bit curious as to the reasoning behind your "persuation process for using chm-files only".
CHM files and printed documentation are two entirely different beasts.
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
>

How can I include a portal component look and feel in a java servlet

Does any body know how can i include a portal component look and feel (tables, buttons, etc) in a java servlet?

Hi José,
I don't think that is possible. But you can import the css files that ep uses for its look and feel and try to give your web pages similar look and feel. The tables and other controls used in EP are totally different and are done through complex JavaScript coding instead of simple HTML tags. If you want exact lok and feel then i thin you must go for a Webdynpro based application rather then a J2EE application with JSPs.
Regards,
Guru.
PS: Give points for helpful replies.

How can i include a sampling of type in ps7 type tool?

how can i include a sampling of type in ps7 type tool? i did this in ps3

I guess in my zest to answer your question i had forgotton about Adobe Type Reunion.
What operating system are you using photoshop 7 on?
photoshop 3.05 on mac os 7.6.1

Can I include a "SelectionsDynpro" in a Subscreen Area``?

Similar Messages

Maybe you are looking for