Can I include both CSS and HTML codes in one Open HTML Editor.

Somehow Cell phones are not properly reading css codes. Is there any way to include both CSS and HTML codes in one Open HTML Editor?

Hammad, their code is fairly mobile friendly. Per my other discussion with you ( http://topliners.eloqua.com/thread/8532 ), Eloqua's code is responsive for the most part. Most of their issues lie with the styling of the email where you will get different fonts and different sized fonts throughout the email and some other minor display issues.
What you are trying to accomplish is extremely difficult to do because you do not have the access to the HTML to better control how the responsive template works which is why the Eloqua templates (and most ESP templates) stick to the more basic side of emails.
If you want to use Eloqua's WYSIWYG to make their responsive email you can do so, but I would recommend deleting all their body text before editing anything because of the inconsistencies in their code. Otherwise, I think you would be better off coding the emails outside of Eloqua using a 3rd party editor whether it's something more robust like Dreamweaver or Coda, or whether you feel comfortable working in a more text environment with programs like Notepad++ or Brackets.
At the end of the day remember you are paying Eloqua for these and if you choose to stick with the WYSIWYG and you are not getting the results you expect you need to tell Eloqua through your support channels.

Similar Messages

Can I have both Lion and Snow Leopard on One Hard Drive?

My problem is I need to run a PowerPC game on Lion which Lion no longer supports. So i thought i could download Snow Leopard back to my Mac and partiition my hard drive in the process as that is the only way i know of to have both Lion and Snow Leopard. I went through the Boot Camp Asistant process and it seems it will only partition Windows 7 to my Mac when i need Snow Leopard. If anyone has any idea how to help me have both Lion and Snow Leopard at the same time on just one hard drive or figure out how to run the PowerPC programs on my Mac (if there is a way around it). The help will be well appreciated!

How To Run Snow Leopard On A New Mac
This does not apply to new Mac Minis or MacBook Airs. When newer models are introduced that also require Lion for hardware support, the techniques described below will no longer work with the possible exception of using Parallels 7.
What has to be done:
Create a new partition on the hard drive.
Get a clone of a 10.6.8 Snow Leopard system. Put the cloned Snow Leopard system onto the new partition.
Step One: Create a new partition on the hard drive
To resize the drive and create a new partition do the following:
1.    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
       After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2.   You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3.    In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4.   Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Step Two: Obtain a clone of a Snow Leopard system:
You will need access to a Mac already running Snow Leopard. You will need a 16 GB USB flash drive or an external hard drive to which you can clone the Snow Leopard system from the Mac that has Snow Leopard installed. Alternatives are:
Option One:
Install a new Snow Leopard system onto a USB flash drive. Boot the Mac used for installing with the USB flash drive. Update the flash drive system to 10.6.8 using the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard. Verify that you can boot the Mac with the USB flash drive.
Take the USB flash drive to your new Mac and try booting from it. If it works then clone the system from the flash drive to the newly made partition:
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the USB flash drive.
Option Two:
If you have a large enough external drive you can erase and use, then it would be easier to just clone the entire Snow Leopard system from the source Mac computer to the external drive.
          Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the external drive. Source means the Snow Leopard Mac's internal drive.
After cloning verify that it will boot the source Mac. If so then take the external drive to your new Mac boot with it. If all is well then restore the clone to the new partition on your new Mac:
          Restore the clone using Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
          Destination means the new partition on the internal drive. Source means the external drive.
If the above seems too daunting then you might consider running Snow Leopard inside an emulator such as Parallels 7. You are permitted to install a single copy of Snow Leopard inside a virtual machine. You will need to first purchase a copy of Parallels 7 and install it on your new Mac. Create a new virtual machine configured for Mac OS X. You may then install Snow Leopard in the virtual machine then download Mac OS X 10.6.8 Update Combo v1.1 and update to 10.6.8. Be sure to include Rosetta in your initial Snow Leopard installation. Rosetta is not installed by default rather it's an optional install.

Problems previewing all my sites using Dreamweaver 8 both CF and html.

I have restored my hard drive (from a previous Ghost image)
and now encounter problems previewing all my sites using
Dreamweaver 8 both CF and html.
If I preview (using localhost:8500) I get the message "Unable
to connect, Firefox can't establish a connection to the server at
localhost:8500." IE has similar message.
If I preview (using 127.0.0.1 instead of localhost:8500) I
get the page but no images or CSS loads.
An address such as:
http://127.0.0.1/CFIDE/gettingstarted/experience/index_content.cfm
loads just fine - seems CF is working okay.
All the sites used for testing locally have been used for
some time (years) and work on my unrestored drive.
My thoughts: after I restored my hard drive image I installed
both Norton Antivirus 2007 and resintalled ZoneAlarm. I uninstalled
both of the programs but the problem remains.
Any help is much appreciated. I have spent the last two days
trying to get this to work and as many of you can identify with...I
am supposed to be working....!

Hi,
JSF 1.1 doesn't coexist nicely with HTML components.
So if your goal is to build layouts in HTML then this
will not produce the result you want
Skins in 10.1.3 are slightly different than in 11
(selectors may have changed their names). If you need
to specify the class property to make skins work then
this indicates that the skin selectors you use are
not the correct ones.
FrankHi Frank,
thank you for your help, I'm replacing every html component with adf one, panelGroup, panelHorizontal, panelBorder, objectImage etc... etc... but I have a problem...
I need to put an object component about Macromedia Flash and I cannot find any adf component to replace it. Any idea please?
Thank you again.
Ciao.
Ricky

What level CSS and HTML for Dreamweaver CS5 (Vers 11.0)

What level CSS and HTML for DW CS5?

CS5 does not support HTML5 in this sense -
1. It will not automatically start a new document with an HTML5 doctype (you can force it to do this - if you are interested I can tell you how), but you can always just replace what CS5 writes with an HTML5 snippet.
2. It will not show any of the new HTML5 tags in any of your menus (or in code hints) - if you want to do HTML5 you are on your own with manual coding.
The same is true with CSS - if you want to do any of the advanced CSS styles (like animation, gradients, rounded corners, shadows, etc.) you are on your own.

I have a new ipad air and my own apple id. My wife has iphone and her own apple iD. All our music is in her apple id. can i sync both ipad and phone for music but keep my ipad separate from her iphone ?

I have a new ipad air and my own apple id. My wife has iphone and her own apple iD.
All our music is in her apple id. can i sync both ipad and phone for music but keep my ipad separate from her iphone for everything else?

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

How can I print BOTH legal and letter on my duel tray printer????

How can I print BOTH legal and letter on my duel tray printer from my mac? on a pc you can choose "print according to pdf size" and the mixed document will print in both legal and letter auto-selecting the printer tray.

Hello CKAY,
My old printer does not show 8x10 either.
In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
Close out the printer and open it again and the new size you created should show in the list.

Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>

Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

Can I connect both PC and MacBook Pro to Thunderbolt display?

Hello,
I've new MacBook Pro 15" 2011 model (with Thunderbolt port) along with a PC (with DVI output.) I would like to get new Thunderbolt display. Can I connect both PC and Mac at the same time to Thunderbolt display? i.e., I don't want to disconnect wires at all the time and I also I'm going to use Thunderbolt cable when connecting Mac to display.
Any help would be appreciated. Thank you.

Your MBPro (w/TB) should have no problems connecting to the newer TB display!!!
You can NOT connect the PC to the TB display. The Apple website mentions that the display can connect to any "Thunderbolt Enabled" Mac.
http://store.apple.com/us/product/MC914?mco=MTgwOTQzMzk#overview

FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTI

FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTICULAR CUSTOMER?..I AM TRYING TO POST AN IDOC ..SO DATA HAS TO BE PROPER.JUST TELL THE SOLUTION

Hi rendeep,
1. LFB1
   this is the required table.
2. field is AKONT
3. The account number can be different
   for different companies.,
   hence it depnds upon combination of
   LIFNR
   BUKRS
regards,
amit m.

Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

Can we have both 9i and 10g db running on the same machine

Hi,
I want to to exp/imp upgrade of my 9i db to 10g db.
Can I have both 10g and 9i installed on the same server?
Thanks,
Kavitha

Yes, provided that the HW, OS version and Patch level are certified for both 9i and 10g.
Install 10g into a seperate ORACLE_HOME -- whether under the same "oracle" account or a different (e.g. "oracle10g" account).
However, you should consider 11g as 10g is being desupported this month (i.e. no new patches / fixes will be available for 10g)
Hemant K Chitale
Edited by: Hemant K Chitale on Jun 9, 2010 10:58 AM

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can I use both SID and SERVICE_NAME in my DG configuration?

Hello,
Need little guidance for the following senario
I've got a shared database where more then one application connects to. To configure failover from primary to standby, I need SERVICE_NAME'ing but my applications connect using SID naming conventions to this DB
Can I use both SID and SERVICE_NAME in DG configuration + make the applications failover to STANDBY DB as well?
Regards,
Kam

You will hardly achieve a proper connect to your new Primary using SIDs after switchover.
Stay away from using SID - connects with your applications and use application services for that instead.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Can iCal use both English and French languages or does the System software need to be either French or English?

Can iCal use both English and French languages or does the System software need to be either French or English?

joanfromardon wrote:
Can iCal use both English and French languages or does the System software need to be either French or English?
The calendar language is determined by system prefs/language & text/formats.
The app language is determined by system prefs/language & text/language, or you can probably use
http://www.tj-hd.co.uk/en-gb/languageswitcher/

Can i buy both photoshop and illustrator, but just those two?

Can i buy both photoshop and illustrator from adobe, but only buy those two apps?

Hi megan14,
Yes, you can purchase multiple single-app membership plans under a single Adobe ID, as long as they are for different applications.
See Creative Cloud Help | Creative Cloud / Common Questions
^Ani

Can I include both CSS and HTML codes in one Open HTML Editor.

Similar Messages

Maybe you are looking for