Can I include the file names of images in the image itself?
*How can I get the file names of images on each image (without entering them by hand)?*
(I am bring 250 images into a Keynote document, with each image on its own slide. I want to have the file names of the images shown on each slide or image. This doesn't need to look nice.)
(If I can't do this in Aperture, I also have Photoshop Elements. Is there a way to do that in Elements?)
You can't do this directly via Ap3. There are plug in's i believe that make it possible. Maybe someone knows more? Allan
Similar Messages
-
how can I view information about an image, such as the file name and exposure, on the Ipad?
You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info
-
A pdf file is created from a word document and then posted to our dealer portal. It allows the dealer to open the pdf file and then either print and/or save off to a hard drive. The issue is the file name has + signs in between all the words. Is there a way to eliminate the file names coming up with the plus signs? It is not being saved that way. Any help you can provide would be appreciated.
Use a proper file name for the WORD document. MS decided several years ago to allow spaces, but that is not standard and is likely what the issue is. A good alternative is to replace spaces in file names with underbars, "_".
-
Is there any way to show the file name super imposed on the slides?
Is there any way to show the file name super imposed on the slides in Premiere Elements 9?
I am setting up pictures as slide show along with some movie clips but wanted the desctiptive file names appearing with each picture.
Thanks!Yes. In Timeline mode, you add it to an upper video track as a title.
I show you the basics of titles in the Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0 -
The View menu option to display the File Name is grayed out and thus I cannot display the file name.
Hi,
You need to go to View menu and check Details as well.
You may even have to make the thumbnails larger by using the zoom slider at the bottom
Good luck
Brian -
Using sqlldr to load XML files and the file name ? or access the file name
I can use sqlldr to load the XML files when I declare the target table of XMLTYPE, but I need to load the filename and a sequence also with the XML in a table so we can mark wether the file passed validation or not.
something like ....
Create table test1
lobfn varchar(200),
load_number number,
XML_COL XMLTYPE
--------------- here is my sqlldr command
sqlldr xml_user/xml_user load_test1.ctl
LOAD DATA
INFILE *
INTO TABLE test1
append
xmltype(XML_COL)
lobfn FILLER char TERMINATED by ',',
XML_COL LOBFILE(lobfn) TERMINATED BY EOF
BEGINDATA
filename1.xml
filename2.xml
filename64.xml
sqlldr comes back and says "commit point reached - logical record count 64
but when I select count(*) from test1; it returns 0 rows.
and when I
SELECT X.* FROM tst1 P2,
XMLTable ( '//XMLRoot//APPLICATION'
PASSING P2.XML_COL
COLUMNS
"LASTNAME" CHAR(31) PATH 'LASTNAME',
"FIRSTNAME" CHAR(31) PATH 'FIRSTNAME'
) AS X;
It tells me invalid identifier ,
Do I need to use a function to get the XML_COL as a object_value ???
But when I create the table like
create table test1 of XMLTYPE;
and use sqlldr it works, but I dont have the file name, or dont know how to access it ??
and I can use
SELECT X.* FROM tst1 P2,
XMLTable ( '//XMLRoot//APPLICATION'
PASSING P2.object_value
COLUMNS
"LASTNAME" CHAR(31) PATH 'LASTNAME',
"FIRSTNAME" CHAR(31) PATH 'FIRSTNAME'
) AS X;BTW
Here's a trivial example of what you appear to be trying to do..
C:\xdb\otn\sqlLoader>sqlplus scott/tiger @createTable
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:10 2006
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> DROP TABLE TEST_TABLE
2 /
Table dropped.
SQL> CREATE TABLE TEST_TABLE
2 (
3 filename VARCHAR2(32),
4 file_content xmltype
5 )
6 /
Table created.
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
C:\xdb\otn\sqlLoader>type sqlldr.ctl
LOAD DATA
INFILE 'filelist.txt'
INTO TABLE TEST_TABLE
FIELDS TERMINATED BY ','
FILENAME CHAR(32),
FILE_CONTENT LOBFILE(FILENAME) TERMINATED BY EOF
C:\xdb\otn\sqlLoader>type filelist.txt
testcase1.xml
testcase2.xml
C:\xdb\otn\sqlLoader>type testcase1.xml
<foo/>
C:\xdb\otn\sqlLoader>type testcase1.xml
<foo/>
C:\xdb\otn\sqlLoader>sqlldr userid=SCOTT/TIGER control=sqlldr.ctl log=sqlldr.log -direct
SQL*Loader: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:11 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Load completed - logical record count 2.
C:\xdb\otn\sqlLoader>sqlplus scott/tiger
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Aug 2 22:08:18 2006
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from TEST_TABLE
2 /
FILENAME
FILE_CONTENT
testcase1.xml
<foo/>
testcase2.xml
<baa/>
SQL>
If you are interested in the 11g beta program please contact me directory at
markDOTdrakeAToracleDOTcom -
How to get the file name in one of the Xml node field?
Hi Experts,
i have one requirement with file name in xml file.
i need to get <b>the file name of file</b> in one of the node in xml content of that file.
how can i achieve that req?
treat this as Very Urgent.Hi Bheem,
Explain your scenario in detail..
>>i need to get the file name of file in one of the node in xml content of that file.
1. Create an node <b>Filename</b> in the target datatype.
2. Check the Option Filename in the Adapter Specific Message Attributes in the sender file CC.
3. Use the following UDF and map it to the Filename field in the target message type.
public String getFileName(Container container)
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards
San -
How do I batch the file name (without extention) into the keyword in the metadata
I am trying to use a keyword into sets of images, each of the images on the set contains in the file name what I want for keyword and an extension.
Example,
File names:
WD111_main
WD111_01
WD111_02
I want all of them to have on the metadata just WD111.
help?!?!You will need to do this with a text field and a Javascript that executes on open.
-
I just downloaded Itunes 10. When I download video podcast they save in a individual folder with the podcasts name.tmp, then inside the folder is the video file just named DOWNLOAD. This didnt happen in the previous versions of itunes why is this happening in Itunes 10? How can I change so that the files save as the name of the podcast.
Some users seem to be having issues with the latest build (10.2.2) where files are not moved/renamed after downloading. It works fine for me in a test library so I'm not quite sure what the issue is. You may find things sor themselves out if you turn off Keep iTunes Media folder organised and then turn it back agaqin (assuming you use that feature). Hopefully the next update isn't too far away.
Alternatively you can try my script ConsolidateByMoving which should move selected files that are in the "wrong" place to their standard iTunes locations.
tt2 -
The current default file name appears to be from the URL.
So, we have to install an addon to get this basic bit of functionality back. I've just spent over an hour trying to work out what was wrong with some updated pages on my site - and the answer is, nothing at all. It's Mozilla's fault, like several other bits of crap that keep happening to me.
WHY did Mozilla release this crap when either
they hadn't finished testing it
or they couldn't care less about their users
Yeah, yeah, you're a not-for-profit and you're open source, so you're lovely. I'm sure you've got dozens of ways of making money from this.
Go to hell, Mozilla, I'm using Chrome from now on. -
Error when uploading; the file name is invalid, or the file is too big
Hi, I have posted this topic also in this thread, but we are not getting any answer to this problem. Also, the existing discussion in this thread gives us no idea what to do.
We get the a.m. message when using the "FILE-UPLOAD" UI element only for selected users and for these only in IE8 and not in Firefox.
So we believe that the cause for the error is likely on the client side, especially in some IE settings.
Is there any advice available what to look for and where to check?
Thanks in advance,
M. BüttnerHi,
Please check with following link.
Link:[Uploading Notepad File in Webdynpro ABAP;
Link:[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/69ef8be8a607d6e10000000a42189c/frameset.htm]
Thanks,
Renuka S. -
I can do it in Acrobat Pro, but I don't see any way to do so in Reader.
If you open the PDF in a browser (like Firefox or Chrome) the file path, including the file name, will print at the top of the printout. I'm unaware of a way to do it with Reader, but someone else may know how.
-
After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.
Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN -
bool exists = false;
TreeNode newNodeParsed = null;
TreeNode rootNode = treeViewMS1.Nodes[0];
TreeNode nextNode = rootNode;
string f = Path.GetFileName(txtUploadFile.Text);
TreeNode subnode = new TreeNode(txtDir.Text);
TreeNode filename = new TreeNode(f);
if (!txtDir.Text.Contains("/"))
foreach (TreeNode node in rootNode.Nodes)
if (node.Text == txtDir.Text)
exists = true;
break;
if (exists == true)
subnode.Nodes.Add(f);
else
rootNode.Nodes.Add(subnode);
subnode.Nodes.Add(f);
The rootNode is the root directory in the treeView1
subnode is a node inside the root. For example the subnode name is manuelisback
I'm checking if the subnode exist i want to add the file for example (lightning1.jpg) to be under subnode.
If the subnode is not existing add the subnode to the root and then add the file name lightning1.jpg under the subnode.
But the file name is never added under the subnode:
I added manualy the lightning1.jpg under test.
But the lightning1.jpg also should be added to be under manuelisback. There should be two lightning1.jpg here.
One under manuelisback and one under test. The one under test i added manualy from my ftp server.
But the one i want to be under manuelisback i'm trying to add from my program and it dosen't add it to there.
And when i'm using a breakpoint i see on subnode the text manuelisback and i see on f the text lightning1.jpgIf I understand your question correctly, you might want to try changing:
if (!txtDir.Text.Contains("/"))
foreach (TreeNode node in rootNode.Nodes)
if (node.Text == txtDir.Text)
exists = true;
break;
if (exists == true)
subnode.Nodes.Add(f);
else
rootNode.Nodes.Add(subnode);
subnode.Nodes.Add(f);
to something like:
if (!txtDir.Text.Contains("/"))
foreach (TreeNode node in rootNode.Nodes)
if (node.Text == txtDir.Text)
subnode = node;
exists = true;
break;
if (exists == true)
subnode.Nodes.Add(f);
else
rootNode.Nodes.Add(subnode);
subnode.Nodes.Add(f);
rootNode.Nodes.Add(f);
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link. -
SSIS - creating part of the file name from an id in the database
I am trying to figure out how to pull an "id" from my data source to include in the file name. Right now the file name created looks like customer_002_timestamp.txt. I need to add the id to the file name and I need to grab it at the time I get
the data, so then the file name becomes customer_002_id_timestamp.txt.
My data source is Oracle and I am using Attunity, so I do not have the capability of using the resultset found in the SQL Task because I have to use the data task.
Has anyone ever extracted an id from a query against Oracle using the Attunity connector to add as part of the file name? If so, how would I add that to my control flow task?
Thanks in advance for any assistance.Is it a static id value you want
Then you can just use a SSIS variable to hold value from resultset in execute sql task
Then inside your data flow you can use an expression for setting value of another variable which can be used for setting filename in your destination task. The expression will include logic to concatenate id variable also which we populated in the previous
step.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews. We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension). The Modified information is Unknown, as is the Size and Compressed Size.
When the review file is then re-opened, even the initiator cannot open the file, although:
The file location is marked with the paperclip within the document.
The file name is shown in the Comments List with the initiator's name.
In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
The file Name cannot be edited, although the file Description can be.
We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation. Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform. Can someone please give us some advice how to get this feature to work as described?FYI Rave,
There are some other forum entries with this exact same issue...:
Cannot Open Attachments in PDF
Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?
Maybe you are looking for
-
Why is Family Sharing not allowing me to ask for purchases from my mom?
We recently got family sharing together and once my mom tried to click the thingy that says, "Turn on ASK TO BUY" or whatever, this happened: "Cannot Enable Ask to Buy, Ainslie is sharing purchases from an account that's also used by another family m
-
About 7 months ago I purchased an HP 23xi IPS to replace a burned out ViewSonic flat screen for my desktop (HP Pavilion a6050e, PN: GC382AV#ABA, SN:[Personal Information Removed] running Windows Vista Home Premium OEMAct 32 bit, with a NIVIDIA GeForc
-
Hi All, I currently have my iTunes library on my external hard drive. I was thinking of moving it to my macbook so I could have it with me. My first question is: what is the easiest way to copy everything to my macbook? My second question is: does an
-
Unable to view some websites/photographs not appea...
Hi - first post here, hopefully not one of many. A week past on Monday, I received the HH3 having upgraded to option 2. Plugged in the Ethernet cable and away I went. No problems, then I about a day later I found I couldn't log in to my Amazon.co.u
-
This HP grey box is a real pain to try to work with. Does HP mess up everyone's computer by sticking it on there with no way to minimize it? Do I have to switch printers to get rid of this stupid box?