Can I install 9.0.3 Production on top of 9.0.3 Preview?

Can I unzip the 9.0.3 production version into the same directory as 9.0.3 preview? I want to make sure I don't lose 'mywork'.
Thanks

Randy,
You will need to explicitly open the Workspaces again in the new version of JDev.
To get the Connections, you can either
a) Export the connections from 9.0.3 Preview and Import them into 9.0.3 Production. (Right-click on the particular connection type)
or
b) You can start JDev with the '-migrate' option and then point it to the 9.0.3 Preview directory.
There is information on this in the help. It can be found under:
- Getting Started with JDeveloper
- Ways to Migrate to Oracle9i JDeveloper 9.0.3
Hope that helps,
Lisa

Similar Messages

I can't install CS 5.5 Production Premium on my new iMac. I no longer have the CD's to reinstall. I

I can't install CS 5.5 Production Premium on my new iMac. I no longer have the CD's to reinstall. I downloaded the software using this link from Adobe http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html . When I try to put my Serial Number in the error message is that it is not valid for this product. I have checked on my Adobe account and I have all the details previously stated here correct. Please help to resolve this issue. Thank you

AS per above
This was not helpful intact i think its just passing the ball
I still have the same problem as per above
What you have given me as a solution is for the basic and obvious, which I
already know
Again, here is my product and serial no
I want better help than a link to a page that asks whether I have the write
osx
Gees
5.5
Mac
19 Nov, 2011
<serial number removed by mod - kglad>

Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake. M/c is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake. Machine is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

Welcome to Apple Support Communities
Mountain Lion is a full 64-bit operating system. Why do you think Mountain Lion is 32-bit in your computer?
To check that you are definitely using a 64-bit operating system, open Terminal (in /Applications/Utilities) and type:
uname -a
Then, tell us what you see at the end after RELEASE. If you see i386, you are running a 32-bit operating system. If you see x86_64, you are using a 64-bit operating system. Also, the processor of your Mac is 64-bit

Fatal error - Can't install CS 5.5 Production Premium

I'm getting the following error when trying to install Production Premium (Academic) discs.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.
This message appears prior to installation, so nothing installs. I already have CS 5.5 Design Premium installed, but am only attempting to install the software in Production Premium that was not previously installed. The full error message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 3 error(s), 6 warning(s)
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW034: Warning: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {4058E728-84D8-45CE-8E2D-5F35BD6659A1} Adobe Extension Manager CS5.5 5.5.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {6548A7DA-770A-4BCD-A6ED-719CC7B6FD1B} Adobe Media Encoder CS5.5 X64 5.5.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
WARNING: DW034: Warning: {61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 will not be repaired, due to updated patch of the payload and one of the top level payload is being installed.
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.
I am not trying to reinstall Photoshop, so the Photoshop Camera Raw message puzzles me, along with Camera Profiles. I unchecked all previously installed programs. Can anyone help?
Intel i7
Win 7 64 bit
24 GB RAM

I have uninstalled everything and run the clean up utility several times. PP is now hanging at the same point in the installation, at 95%. I've given it plenty of time, but after an hour at 95% it is clear nothing is happening. This has happened twice. I disabled firewall, antivirus, malware, and closed my startup items before attempting the installation, but still it hangs. I am desperate to get this installed so I can finish a project. Can anyone help me??? These DVDs are going to make very expensive beverage coasters....

How can we Install MS Office 2013 product in Lenevo Laptop

Hi,
My query as per the subject line is, How can we install MS Office 2013 home & Business in Lenevo Ipad Z570 laptop. We being a company are having Dell laptops more & MS Office 2013 have been installed in all dell laptops but as we have 2 lenevo laptops
MS Office 2013 is not being installed in it.
Please Guide us on this ASAP..
With Regards,
Spoorthi Patil
91-8050962896

Hi，
Installation steps should be the same no matter in dell laptops or lenevo laptops, did you encounter any errors when you install this product in a lenevo laptop? What is the symptom and error message? Did you install singly or deploy in an organization.
Plaese refer to this link, and take questions above into consideration
http://technet.microsoft.com/en-us/office/fp160948.aspx
It is recommended to ask in this forum if it is more related with Office rather than an Client issue,
Office Forum
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Yolanda Zhu
TechNet Community Support

Can't install an Creative Cloud Products on Mac

I can't get any of the creative cloud products to install on my mac. As soon as I open the installer, the application manager freezes and has to be quit from activity monitor. This is incredibly frustrating and irritating and I would love some help to get this issue resolved. Until this is resolved I can't use any of the Adobe products on this computer.
Here are the methods I have used to try and install things, nothing has helped so far:
I've run Adobe Creative Cloud Cleaner tool, cleaned out everything via that.
Tried install Creative Cloud Desktop via .dmg file. That froze on "initializing installer"
Tried installing Photoshop CC directly from creative.adobe.com, that froze on "intializing installer"
System:
Macbook Air 13" Mid 2011
Mac OS X 10.9

Hi tfavaron,
Kindly go through the below mentioned steps to download Photoshop CC without downloading Creative Cloud Desktop App.
Additional information: If you will miss any of the steps mentioned below you would not be able to download the software.
Step 1. Go to: http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us&promoid=KHXXW
Step 2. clear the text from the address bar and paste the below mentioned links there in the address bar and hit return.
LInk 1 : http://prodesigntools.com/trials3/AdobeProducts/PHSP/14/osx10/Photoshop_14_LS20.dmg
Step 3. Run the downloaded file.
Kindly revert in case of further issues.
Thanks!
Atul Saini

Can't install beyond request for product code

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it blank
I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?

I am sure it has been covered before but I do not find the answer. I am trying to load WinTen from .iso. Although instructions say we do not need a product code, I can not progress beyond the screen asking for one. If I leave it
blank I can not effect the <Next> key. If I insert anything, including the key for recovery, I am informed that the key does match. What now?
My reply is lengthy, I am afraid. Please bear with me.......
1. MS is holding a big event to day at 9a.m Pacific time. It is possible that a new build of Windows 10 TP is going to be released, or even a Consumer Preview.
So, you might want to find out what is being said in the event first.
2. You are right. product key is not needed when one installs the Windows 10 TP.
That said, here are the generic product keys for Enterprise version and non-Enterprise version.......
Enterprise version : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Non-Enterprise version : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
3. Permit me to start from scratch regarding installing Win 10 TP.
It is strongly suggested that you either install it in a virtual machine or dual booting with your existing OS.
Please use the following download links to download the ISO file > then burn it to a bootable DVD and use the DVD to do a clean install.
Enterprise direct download link:
Windows
10 Enterprise build 9879 64-bit ISO image
Windows
10 Enterprise build 9879 32-bit ISO image
Non-enterprise download link :
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10
How to burn iso to a bootable dvd:
There are more than one program doing the same job. I personally use Windows USB/DVD Download Tool. It is easiest.
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

Can't install After Effects with Production Studio

I have an older version of Production Studio that includes AE 7.0 I has to wipte my drive and reinstall Windows XP and all my software. However, when i try to install the full Production Studio, it says that AE 7 is already installed. It is not!!
The problem started when I first did the reinstall, the computer crashed. I then installed everything and put in the studio serial number. ALL the other prodcuts ran fine, photoshop, illust, premiere, etc. BUT AE 7 asked for a serail number seperately. I then unistalled everything. I used an uninstalled and even a registry cleaner. I got rid of EVERY Adobe program, file, folder and even registry entry. However, the studio installed still says AE is present!!! There is NOTHING on my computer that says Adobe! What is it checking that it thinks there is a copy of AE somewhere!!
Any help, please......I need to use it, but i can not afford to upgrade at this time. I spent a LOT of money on this bundle a few years ago. I just want to use what i bought.
thanks for any suggestions
(i called adobe, they will not give any support for this legacy suite, well they tried a little after 3 phone calls, but the tech was not able to do anythig other than delete some older folders)
Brett

@Adobe First, you should get rid of your crappy OUTSOURCED phone tech support. They wasted over 2 hours of my time and your money and they know nothing.
@Tam151 This is how I finally figured out that to do (on my own!!!!!!). THe problem is caused by the auto install of Direct X. The installer installs AE then installs Direct X without checking even though it was already installed. Then the system does a reboot before the rest of the Studio is installed. This causes AE to be installed seperately from the Studio and hence causes the registration problem.
SO, first, I had to do a system restore to a date before I started to install the Studio. This takes care of the hidden registry files. I tried for hours and hours with about 4 different programs and NOTHING will remove the 'hidden' entry and Adobe could not help me. THe tech support took my computer for over an hour trying to uninstall everything which was a waste, they didn't even know where the reg entry was. That is why I did a system restore. But now there is still the same problem if I try to install again. The solution is to copy all the DVDs onto your hard drive AND DELETE THE DIRECT X folders in ALL LOCATIONS!!!!! Do the install from the hard drive and now it will do a complete install without the direct X problem (although make sure you have Direct X installed already) and you will be able to register and use all the products!!
1. system restore to before you started the install
2. copy all dvds to hard drive
3. delete all dirext x folders
4. install from hard drive
Good luck

Can I install the traditional CS6 product (not creative cloud) on a mac and a windows pc?

Hey,
I already know that with creative cloud I can install CS6 on both a mac and a windows pc.
But what about the traditional CS6 version (without creative cloud membership).
Is it possible to install on both mac and windows pc, too, or is it restricted to one operating system, like in CS5.5 still?

Traditional versions (perpetual licenses) are still platform specific: Windows only or Mac only.
Installation on both Mac and PC is one of the USPs (Unique Selling Propositions) of the Cloud versions.

CAN'T INSTALL UPDATES TO ADOBE PRODUCTS

WHY CANT I INSTALL UPDATES?
UPDATES WORKED FINE UNTIL CC
HOW DO I INSTALL UPDATES?
I GET AN ERROR EVERYTIME I TRY TO INSTALL!
THIS SUCKS!
FORGOT TO MENTION
ADOBE CREATIVE SUITE 5 ALL PRODUCTS
MAC BOOK PRO 15"2013

Still no answer!!!!!!!!
How difficult is this????????
Really?????
Go to a photography forum and ask any question within 2 minutes you have 50+ different answers?????
I just do not understand?????
All I want is support for a product that I paid for??????
I want to be able to see the symbol properties window in FW how hard is that?
Saw there was an up-date available? (don't know if that will actually solve my issue but must start with the latest software) guess what cant update software?????
This is some ********* way to make someone move to the CC i guess?
Why cant someone just post the answer?
I get better response from open-source code?

I have Adobe Photoshop Elements 8 on my old lap top. How can I install it on my new lap top?

I already have Elements 8 installed on my old laptop. I got a new laptop and need to take it off my old computer and install it on my new one. Is this possible or do I need to buy a new program?

Deactivate and then unistall Elements 8 on your old laptop and install it on the new machine.
Thanks
Nikhil

I have the CA ISS security suite program - Can I install it on to my lap top using my Fire Fox?

I am interested in using my CA ISS security suite program on my Fire Fox. Do I uninstall my CA ISS security suite from the old Internet Explorer first and and then install it on my new Fire Fox? Thank you-I love the Fire Fox.

Sorry, downgrading is not supported.

I can't install multi language pack - english for visual studio 2013 update 3

Error : Microsoft portable library multi-targeting language pack - enu element not fount
Error : Microsoft visual studio 2013 performance collection tools - ENU package failed.
I have downloaded visual studio 2013 in some other language. I wanted to change it to English so I downloaded multi language pack- English and installed. I came up with the above error. Please help me. Thanks in advance.

I don't know of a reason you posted your question in a Visual Basic forum. You should probably find a Visual Studio forum to post your question in.
However I've never tried to do what you want to do. But maybe these links can assist you.
Microsoft Language Interface Packs (LIPs) and Visual Studio
"When you install different language versions of Visual Studio on the same computer, you can only switch languages between matching editions. For example, if you have an English Express Edition installed, a German Express Edition installed, and a Professional
Edition installed, you can only switch languages for the Express Editions, not for the Professional Edition.
Starting with Visual Studio 2012, the Professional, Premium, and Ultimate products use a unified language pack. To install more than one language version of these products, you must install a full language product first and then install one or more language
packs." |||||||||| "NOTE: The Professional, Premium, and Ultimate products starting in Visual Studio 2012 don't support installing multiple language versions of the full language product on the same computer. After you install one
full language product, you must add language versions by using language packs. You can still install multiple full language products of the Express editions on the same computer."
Visual Studio 2013 - Microsoft Language Interface Packs (LIPs) and Visual Studio
Frequently Asked Questions - Windows Language Interface Pack (LIP)
La vida loca

Query to display the exact match product at top or increase the nearness

Hello All,
I am using the iStore search and it is returning results for Part Number and Description search. If I am searching a particular Part Number , it is displaying the particular product and its related products. I need the exact matched product in the first row (topmost).
When I checked the back-end query, It is using contains for powerful search.
How can I display the exact match product at top or increase the nearness in search.
Please help.
I have seen a similar thread in the forum.
Contains: exactly match
Thanks in advance,
Muhammed Aslam
Edited by: tpmuhammedaslam on Jan 10, 2013 3:48 AM

Hello Muhammed Aslam,
If fuzzy search is enabled, then cannot search by part number.
The seeded query for iStore product search is based on the description as follows:
Product Search (Section Search - R12)
select * from
(select T.*, RowNum as row_num
from (select inv_item_id INVENTORY_ITEM_ID
,description DESCRIPTION
,0 CATEGORY_ID
,nearness NEARNESS
,concatenated_segments CONCATENATED_SEGMENTS
,primary_uom_code PRIMARY_UOM_CODE
,primary_unit_of_measure PRIMARY_UNIT_OF_MEASURE
from (SELECT * FROM (select /*+ FIRST_ROWS leading(i) INDEX (x,IBE_SECTION_SEARCH_U1) */
distinct i.inventory_item_id, i.description, 0
,x.inventory_item_id inv_item_id, score(100) nearness
,mtl_system_items_b_kfv.concatenated_segments,
mtl_system_items_b_kfv.primary_uom_code,
mtl_system_items_b_kfv.primary_unit_of_measure
from ibe_ct_imedia_search i,ibe_section_search x
,mtl_system_items_b_kfv
where contains (i.indexed_search, :1 , 100) > 0
and i.language = userenv('LANG')
and i.organization_id = :2
and i.web_status='PUBLISHED'
and x.inventory_item_id = i.inventory_item_id
and i.inventory_item_id = mtl_system_items_b_kfv.inventory_item_id
and i.organization_id = mtl_system_items_b_kfv.organization_id
and x.minisite_id = :4
and x.organization_id =:5
order by nearness desc ) WHERE rownum < :6
))T
where rownum where row_num >= :8
Product Search (Category Search - R12)
select * from
(select T.*, RowNum as row_num
from (select inventory_item_id INVENTORY_ITEM_ID
,description DESCRIPTION
,category_id CATEGORY_ID
,nearness NEARNESS
,concatenated_segments CONCATENATED_SEGMENTS
,primary_uom_code PRIMARY_UOM_CODE
,primary_unit_of_measure PRIMARY_UNIT_OF_MEASURE
from (select i.inventory_item_id, i.description, i.category_id
,score(100) nearness
,mtl_system_items_b_kfv.concatenated_segments
,mtl_system_items_b_kfv.primary_uom_code
,mtl_system_items_b_kfv.primary_unit_of_measure
from ibe_ct_imedia_search i,
mtl_system_items_b_kfv
where contains (i.indexed_search, :1 , 100) > 0
and i.language = userenv('LANG')
and i.web_status='PUBLISHED'
and i.organization_id = :3
and exists (select 1
from ibe_dsp_section_items s,ibe_dsp_msite_sct_items b
where s.section_item_id = b.section_item_id
and b.mini_site_id = :4
and s.inventory_item_id = i.inventory_item_id
and (s.end_date_active > sysdate or s.end_date_active is null)
and s.start_date_active < sysdate)
and rownum < :5
and i.inventory_item_id = mtl_system_items_b_kfv.inventory_item_id
and i.organization_id = mtl_system_items_b_kfv.organization_id
order by nearness desc ))T
where rownum where row_num >= :7
Regards,
Debbie

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

Can I install 9.0.3 Production on top of 9.0.3 Preview?

Similar Messages

Maybe you are looking for