Can I install a 30gb+ drive in a 1G?

Posted this question here a while ago, gonna try again:
Hi, I've got a 20gb 3G, I'm at the point where I need to upgrade to a bigger mp3 player, and I'm really interested in a 1G (rather than a newer iPod model) for a number of reasons. However, obviously I need something substantially BIGGER than 20gb to make my time worthwhile, and 1G only went up to 10.
So... are 1Gs compatible with 3, 4, or 5G drives? Could I buy a larger (maybe 40gb or 60gb) drive and install it in an old first-gen model, or has the actual modelling of the drive/mobo changed since then so that it wouldn't fit? Really looking for an answer here, as if anyone can tell me that it works, I'll be buying a used 1G.
Of course, since the newer drives are so much smaller, I realize that I'll have to put extra padding and whatnot in the 1G, but that's not a problem; I'm just worried about compatibility.
Thanks for any help!

Sure:
ATA is the standard for most hard drives. the ipods use a type called ATA-5.
"Advanced Technology Attachment. A disk drive implementation that integrates the controller on the disk drive itself. There are several versions of ATA, all developed by the Small Form Factor (SFF) Committee:
ATA : Also known as IDE (Integrated, or Intelligent, Drive Electronics) supports one or two hard drives, a 16-bit interface and PIO modes 0, 1 and 2.
ATA-2 : Supports faster PIO modes (3 and 4) and multiword (DMA modes (1 and 2). Also supports logical block addressing (LBA) and block transfers. ATA-2 is marketed as Fast ATA and Enhanced IDE (EIDE).
ATA-3 : Minor revision to ATA-2.
Ultra-ATA : Also called Ultra-DMA, ATA-33, and DMA-33, supports multiword DMA mode 3 running at 33 MBps.
ATA/66 : A version of ATA proposed by Quantum Corporation, and supported by Intel, that doubles ATA’s throughput to 66 MBps.
ATA/100 : An updated version of ATA/66 that increases data transfer rates to 100 MBps.
ATA is also called Parallel ATA."
-From http://www.x-emi.com/tech_terms.html
Anyway, you can just buy any ATA-5 drive (Or get it from like another iPod) & then install it into yours.
Look here for some ideas: http://www.newegg.com/Product/ProductList.asp?Submit=ENE&N=201015001470000314&Subcategory=14&description=&srchInDesc=&minPrice=&maxPrice=&ATTR1=&ATTR 2=&ATTR3=&ATTR4=&ATTR5=&ATTR6=&ATTR7=201015001470000314
You can also install any CompactFlash Card, or CompactFlash MicroDrivein a 1st gen.

Similar Messages

  • Can I install a super drive dvd buner?

    I have a G4 (466 MHZ) I would like to buy a digital movie camera and make DVDs on the computer from video I have taken. I do not have a dvd burner in the G4.
    My question: Can I install a super drive or use an external dvd burner with the current computer?
    Thank you.
    G4 - 433mh   Mac OS X (10.2.x)  

    Fred's reply is 2007 , but a few years ago, I used my ol' reliable friend, my Cube/450 for creating DVDs.. it needed a looooong encoding time (usually over night), but it does work ...
    but...
    with 10.2, use old versions of iDVD (4 or 2...)
    don't upgrade to QT 7...
    be sure, the internal drive has allways 10, better 20GB free....
    and, iDVD≤5 does not support external, firewire connected burners... so, if you're able to use a screwdriver, install any nice Pioneer at a free internal IDE connection; or, dare to use a 'hack', http://patchburn.de/ (english spoken), to teach iDVD4 to use external drives...
    ... that's all not state of the art, lege artis ... but... for less than 50$ you get a DVD-burning Mac..
    ... a slow burning Mac ...

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • Can I install two mSata drives in a w520?

    Using the two pcix slots in w520 - can I install two mSata drives and perphaps even raid them? Thank you
    Solved!
    Go to Solution.

    You can not. The W520 has only one full sized mSATA slot.

  • HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

    tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

    dsharp14 wrote:
    tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
    What are the specs on your Mac?  Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
    Thanks
    Pete

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

    Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

    Run_Esperanza how much space do you still have available on your primary drive?  It is possible to customize the installation destination within the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
    Please be aware that you will need disk space on the primary drive to installed shared components plus contain the temporary files for installation.

  • Trying to install on MacBookPro with Parallels and Windows 8.1. Downloaded the CreativeCloud.exe but says I can't install from network drive

    I sometimes like to use Photoshop CC and Lightroom on the Windows side of my MacBookPro with Parallels. I had to reinstall Parallels and also Windows 8.1 recently and am trying to reinstall some of the software that I had previously on the Windows side. I downloaded the CreativeCloud.exe program and when I try to install it from the Windows side, get a message that I can't install Creative Cloud from a network drive. Where can I put the CreativeCloud.exe so I can install it?
    Thanks!

    You probably need to check your drive setup for the Parallels environment. Nothing to do with Adobe.
    Mylenium

  • Can I install a 3TB drive in my mid-2007 24" iMac?

    I'd like to know if I can install a 3TB drive in my mid-2007 24" iMac. The OTW page for this model says that 2TB is the maximum, but I think it was written before 3TB drives became available. Does anyone know if the controller will recognize drives larger than 2TB?

    Hi,
    First off it would need to be Serial ATA (3 Gb/s) compatible.
    Looks like 4 TB is no problem in my research at OWC...
    http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=272&type=Internal+Dr ive
    http://eshop.macsales.com/MyOWC/Models.cfm

  • Can't install new nVidia driver 301.42

    I have the Lenovo U410 and the nVidia control panel tells me a new driver update is available, version 301.42 for the 610M card. I have the 295.53 installed. But when I download the driver, it says I can't install because there isn't a compatible card. Can someone point me in the right direction?
    Thanks.

    Well I think you should try this driver instead
    It's 304.79, and I know it's for Windows 8, but it works anyway.
    It is the 64 bit version, so if it says it's incompatible, then here's a link for the 32 bit as well
    64 bit:
    http://downloads.guru3d.com/download.php?det=2947
    32bit:
    http://downloads.guru3d.com/GeForce-304.79-Beta-32-bit-download-2946.html

  • When trying to install itunes i get a message saying it can't install the gear driver. Anyone have the same problem?

    Trying to install iTunes but keep getting the message, " Can't install GEAR driver" Any help?

    Error referring to aam protocol when you click download button | CC

  • Can't install XP display driver on Satellite A200-27N

    Hi,
    i did install xp on my a200-27n, but when i try to install the dispaly diver http://support1.toshiba-tro.de/tedd-files2/0/display-20070809122620.zip, it give an message error that the ware is not validated for my computer
    pls i need help

    Have you read the installation instructions?
    You can find it also on the Toshiba website and list you should use as recommended installation order.
    Before you can install the display driver you must install:
    1 Windows XP
    2 Windows Updates
    3 Sun Java 2 Runtime Environment
    4 Intel ICH8M Chipset Utility
    5 Intel 965GM VGA Driver
    If you did do this and cant install the driver, install it manually. Go to the device manager => right click on the graphic card => update driver

  • Trying to install Mountain Lion but I get an erroneous message - can't install on this drive as it's used for time machine backup (no it isn't and never has been)

    Problem installing Mountain Lion on Mac Pro 3 - currently Snow Leopard

    Look at the hard drive where Applications, Library, System, and Users are. There is most likely a backup file there. Delete it.
    Can't Install OS on Volume Used by Time Machine

  • Satellite M60: can not install the newest driver for my graphic card

    Can not install newest driver for my graphic card
    Satellite M60
    ATI MOBILITY RADEON X700

    Hello
    First of all I really dont understand why you start two topics with the same theme. It is much better to have one topic with good content and interesting comments. Am I right? ;)
    Anyway, in your case it is interesting that Toshiba use adapted drivers because of hardware protection. That means that graphic card will not be forced to run at the maximum level. Hardware cooling in notebooks is very problematic and high temperature can result with overheating or hardware damage. All hardware components are placed on small place. Graphic card produce a lot of warmness and it is not so good for all other hardware.
    When you use non-Toshiba driver graphic card will be forced to run faster. Because of that every notebook manufacturers dont support usage of third part drivers. The fact is that hardware protection is priority.
    I didnt make any experiments but according to some reports on this forum there is way how to install non-Toshiba graphic card driver.
    Please check this forum and you will find many comments about that. One interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

  • Can not instal Win7 WLAN Driver for Satellite C660-168

    I can't install WLAN driver on my Satellite C660-168 after Windows 7 installing.
    What's the problem?

    Hi Admiral,
    And why you cant install it? Do you get an error message or what happens exactly?
    As PauPau wrote you have Broadcom WLAN card so you have to download Broadcom WLAN driver that can be downloaded on Toshiba WLAN portal.
    Before installing the driver make sure you are logged in as Administrator or with Administrator rights. ;)

Maybe you are looking for

  • Problem downloading Twiter for Mac.. Any recommendation?

    I have tried to downloand Twiter several time and still not download. I deleted and tried again with the same results. Have anyone have a recommendation? thanks, iLS

  • WM stock updating without TO

    Hi friends, I have an issue regarding transfer orders. When i am returning material to a subcontractor via return delivery, a material document is posted and a TR is created for the same. When i go to the WM stocks i dont find the stock in WM, the st

  • Step backward, undo and automatic layer changes.

    A feature of Photoshop that has always annoyed is the way the Photoshop handles stepping backwards. It's taken me years to finally get motivated enough to post something about it, but so be it, lol. Say I'm working on layer 2, and switch to layer 3.

  • Download help with Illustrator.

    I just purchased the trial, month-to-month Illustrator but it won't download. Help.

  • Cannot delete screen (subscreen) fields

    Hi, I have a few fields on a sub-screen that I need to remove. However, when I highlight them and press the right-click button, the CUT and DELETE are grayed out. Also the "scissor" option on the menu bar is also grayed out. Is there something set th