Can I install a combo drive in ibook G3?

I have a G3 iBook and it only plays CDs. I'd like to swap out the drive and replace it with a combo drive to read and write. Can this be done? Does anyone know what models are compatible and are there "how to" instructions for doing so? Please advise and thanks.

I've done it, in a G3 500. Not a techie!
It is very time consuming (probably take you about 2 hours, the first time) but not impossible. If you like to tinker (or are desperate, as I was) give it a try.
Here is some advice, if you decide to do it. Make sure you have all the proper tools.
1)Print out the instructions.
2)Keep track of all the screws, and where they go (I used double-sided tape to attach them next to the appropriate pictures).
3)Be very careful with the ribbon cable (large orange cable which attaches both the HD and the Optical Drive).
4)Be very careful removing the Trackpad, Power, and Speaker cable connectors.
Also, you might want to replace your Hard Drive with a larger one at the same time. Most of the steps are already done, so you would get more bang for your buck (so to speak). You can install up to 120GB in an iBook, I think.
Good luck.

Similar Messages

How can i install mozilla firefox on my iBook G4

How can i install mozilla firefox on my iBook G4

The mozilla-derived Firefox-based browser known as Tenfourfox does a fair job and is about due for code upgrade near the end of this year from version 17 to version 24. Tenfourfox can run in Tiger 10.4.11 + Leopard 10.5.8.
http://www.tenfourfox.com/
I have & use both Tenfourfox + SeamonkeyPPC versions in my PPC G4 Macs. (My third choice is iCab...)
These both play well together and can be run simultaneosly without odd effects, unlike what can happen if you were to run the original Firefox and then launch Tenfourfox; as those share resources. I use SeaMonkey PPC for my web mail login via google Notifier, and have that set as the default browser through use of Safari's preference settings. Even though my first browser choice is Tenfourfox.
You can choose to 'enable plugins' of stuff that by default is turned off in tenfourfox, for security reasons, such as an older no-longer supported version of adobe's Flash. However, video such as youtube content will often automatically work OK from most sites via Tenfourfox now.
{There's also a seamonkey 'modern version' for intel-based macs w/ later OS X, not at the seamonkeyPPC site...}
Good luck & happy computing!

Can I install Mountain Lion on my iBook version 10.5.8?

Can I install Mountain Lion on my iBook version 10.5.8?
If not can I get snow leopard as my current version wont let me download the latest version of Java

No to both questions.
(70984)

Can I install a super drive dvd buner?

I have a G4 (466 MHZ) I would like to buy a digital movie camera and make DVDs on the computer from video I have taken. I do not have a dvd burner in the G4.
My question: Can I install a super drive or use an external dvd burner with the current computer?
Thank you.
G4 - 433mh Mac OS X (10.2.x)

Fred's reply is 2007 , but a few years ago, I used my ol' reliable friend, my Cube/450 for creating DVDs.. it needed a looooong encoding time (usually over night), but it does work ...
but...
with 10.2, use old versions of iDVD (4 or 2...)
don't upgrade to QT 7...
be sure, the internal drive has allways 10, better 20GB free....
and, iDVD≤5 does not support external, firewire connected burners... so, if you're able to use a screwdriver, install any nice Pioneer at a free internal IDE connection; or, dare to use a 'hack', http://patchburn.de/ (english spoken), to teach iDVD4 to use external drives...
... that's all not state of the art, lege artis ... but... for less than 50$ you get a DVD-burning Mac..
... a slow burning Mac ...

How many IDE drives & CDrom can be installed with SATA drives??

How many IDE drives & CDrom can be installed with SATA drives??
i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
& if it can be added, can i install 2 SATA drives???
THX in advance

The 3 versions of this board that are available are:
875P Neo-FISR (PCB 2.0)
875P Neo-LSR (PCB 1.0)
875P Neo-FIS2R (PCB 1.0)
All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
2 x SATA (Supporting 2 SATA HDD drives)
2 x PATA (Supporting 4 IDE devices)
All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
->INTEGRATED PERIPHERALS
->ON-CHIP IDE CONFIG
ATA CONFIG: S-ATA ONLY or P-ATA ONLY
S-ATA/P-ATA KEEP ENABLED: YES
OPERATE MODE:
If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
2 x SATA (Supporting 2 SATA HDD drives)
1 x PATA (Supporting 1 Master IDE HDD drive)
The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
So the answer to your origional question is:
2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
or
4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

Can I install two mSata drives in a w520?

Using the two pcix slots in w520 - can I install two mSata drives and perphaps even raid them? Thank you
Solved!
Go to Solution.

You can not. The W520 has only one full sized mSATA slot.

HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Run_Esperanza how much space do you still have available on your primary drive? It is possible to customize the installation destination within the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Please be aware that you will need disk space on the primary drive to installed shared components plus contain the temporary files for installation.

Can I replace my combo drive with a superdrive??

hello all,
Can I replace my combo drive with a super drive? I see on some of the tech do it yourself pages the G5 17" original imac is supported for changing it out by your self. but how do I go about buying the superdrive...and from whome??
thanks,
marc

As to the DIY installation...I purchased an OWC Mercury 8x dual to replace my combodrive, but the installation directions that everyone refers to on the apple support site says nothing about removing the mounting cage to use in the replacement installation. Am I missing something here? Sure, I can remove the three mounting screws that holds the cage to the drive, but then I'm left with the welded bracket that does not seem to want to move. OWC support was no help at all. Is there a trick to this?

Lenovo b560 can't install nvidia display driver

hello i've learned that lenovo b560 computers got 2 graphic cards one is intel hd graphics other is nvidia 310m but i can't install the nvidia driver it always gives the no compatible drivers found error :/

hi Frost1,
Welcome to the Forums.
The B560 with Intel+Nvidia graphics uses the Nvidia Optimus Technology to switch between the Intel GPU (for power saving) and the Nvidia GPU (for applications that requires more processing power).
If you have Windows 7, try the following:
1. Restart the machine and hit F8. On the menu, select "Disable driver signature enforcement".
- Sample image
2. Install these drivers then reboot:
1st: Intel Onboard Graphics Driver for Windows 7 (64-bit)
2nd: NVIDIA Display Driver for Windows 7 (64-bit)
If you still get the error, can you PM me your serial number or indicate your machine type (e.g., 0679-3JU) to check the PC specs.
Regards

I need to refresh my iMac's OS but I can't use the combo drive

I need to upgrade the OS on an old iMac G4 I bought and the internal combo drive is dead. Is there a way to do this using either a Flash drive or a HD drive? I have SuperDuper so I thought I would copy my system from an existing iMac G4 to this computer, but SuperDuper isn't being so Super right now and is coking on some files.
Any other ideas? (I don't have an external DVD drive but do own a MacBook and have a wireless network if that helps.) THANKS.

Does the "new" iMac have Firewire (I think all G4 iMac had FW ports)? If so, you can connect it via a Firewire cable to another Mac and boot the iMac G4 into "Target" mode which will make it appear as an external hard drive on which ever computer it is tethered to.
You can then run the install DVD on the computer and install the system to the "Target" which is the old iMac.
Patrick

Accessing combo drive on iBook

My Superdrive has died on my iMac, I have an iBook with a combo drive, can I hook up the iBook to my iMac and use the combo drive from my iMac?

Hi TrayKay9's-
FireWire Target Disk mode is your friend.
You may find this helpful: How to use FireWire target disk mode
Luck-
-DP

Trying to install on MacBookPro with Parallels and Windows 8.1. Downloaded the CreativeCloud.exe but says I can't install from network drive

I sometimes like to use Photoshop CC and Lightroom on the Windows side of my MacBookPro with Parallels. I had to reinstall Parallels and also Windows 8.1 recently and am trying to reinstall some of the software that I had previously on the Windows side. I downloaded the CreativeCloud.exe program and when I try to install it from the Windows side, get a message that I can't install Creative Cloud from a network drive. Where can I put the CreativeCloud.exe so I can install it?
Thanks!

You probably need to check your drive setup for the Parallels environment. Nothing to do with Adobe.
Mylenium

Can I install a 30gb+ drive in a 1G?

Posted this question here a while ago, gonna try again:
Hi, I've got a 20gb 3G, I'm at the point where I need to upgrade to a bigger mp3 player, and I'm really interested in a 1G (rather than a newer iPod model) for a number of reasons. However, obviously I need something substantially BIGGER than 20gb to make my time worthwhile, and 1G only went up to 10.
So... are 1Gs compatible with 3, 4, or 5G drives? Could I buy a larger (maybe 40gb or 60gb) drive and install it in an old first-gen model, or has the actual modelling of the drive/mobo changed since then so that it wouldn't fit? Really looking for an answer here, as if anyone can tell me that it works, I'll be buying a used 1G.
Of course, since the newer drives are so much smaller, I realize that I'll have to put extra padding and whatnot in the 1G, but that's not a problem; I'm just worried about compatibility.
Thanks for any help!

Sure:
ATA is the standard for most hard drives. the ipods use a type called ATA-5.
"Advanced Technology Attachment. A disk drive implementation that integrates the controller on the disk drive itself. There are several versions of ATA, all developed by the Small Form Factor (SFF) Committee:
ATA : Also known as IDE (Integrated, or Intelligent, Drive Electronics) supports one or two hard drives, a 16-bit interface and PIO modes 0, 1 and 2.
ATA-2 : Supports faster PIO modes (3 and 4) and multiword (DMA modes (1 and 2). Also supports logical block addressing (LBA) and block transfers. ATA-2 is marketed as Fast ATA and Enhanced IDE (EIDE).
ATA-3 : Minor revision to ATA-2.
Ultra-ATA : Also called Ultra-DMA, ATA-33, and DMA-33, supports multiword DMA mode 3 running at 33 MBps.
ATA/66 : A version of ATA proposed by Quantum Corporation, and supported by Intel, that doubles ATA’s throughput to 66 MBps.
ATA/100 : An updated version of ATA/66 that increases data transfer rates to 100 MBps.
ATA is also called Parallel ATA."
-From http://www.x-emi.com/tech_terms.html
Anyway, you can just buy any ATA-5 drive (Or get it from like another iPod) & then install it into yours.
Look here for some ideas: http://www.newegg.com/Product/ProductList.asp?Submit=ENE&N=201015001470000314&Subcategory=14&description=&srchInDesc=&minPrice=&maxPrice=&ATTR1=&ATTR 2=&ATTR3=&ATTR4=&ATTR5=&ATTR6=&ATTR7=201015001470000314
You can also install any CompactFlash Card, or CompactFlash MicroDrivein a 1st gen.

Can I install a combo drive in ibook G3?

Similar Messages

Maybe you are looking for