Can i install a firewire card in my lenovo h430 cmputer this is for my jvc digital video camera
Solved!
Go to Solution.
Hi williehunt,
Yes that is possible.
You will have to connect the card to this port "PCI Express x1 Ver 2.0*" on your computer.
Make sure the card you'll get has this interface so it will fit and communicate properly on your computer
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
I have a 1.25ghz g4 tower at work and we do back up with an external hd (small company). The hd is only usb. So can I go get a usb 2 card and install it and get the improvement in speed of usb 2?
Thanks in advance
Imac g4, 12 powerbook 1ghz Mac OS X (10.3)USB specs might be slightly faster than FireWire 400, but real transfer rates are a lot better with FireWire.
<http://www.barefeats.com/usb2.html>
Part of the difference is chip-set and drivers (Intel Macs are supposed to have faster USB), but a lot is the protocol differences. USB was designed to replace low-speed serial interfaces, FireWire for high-speed digital video. USB requires a lot more CPU work during the transfer, FireWire chips do a lot of the work. -
Can you install a SIM card in a iPad model MD510B/AR
Can you install a SIM card in a iPad model MD510B/AR
Nope this appears to be a WiFi model only if my information is correct. If you have the device to hand then check it for a SIM card tray. With the Home key at the bottom the SIM card try if available will be in the top-left corner.
Regards,
Steve -
Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics
Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics and if i can where
can i find a graphics card that will install in that computer.There are many MANY threads on this, the answer is that it's not worth your time since you have to have a replacement card that the HP system BIOS already likes,, and this is not the same as replacing anything in a desktop, this is the equivalent of replacing the graphics in a laptop.
Since the graphics cards are not considered a user upgradable component there are no lists of "approved cards" nor guides to doing it, the closest you could do is the service or recycling disassembly sheets. -
My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.
Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.
-
HI, How many computers can be installed Creative Cloud, if I have a subscription to "Creative cloud for photographer"?
Problem: I can not use my Adobe account, for install Creative cloud (PS & Lr), on the second computer. Creative Cloud offers me to buy Ps CC & Lr. But only if you start Ps programm ask me to enter the key, Lr is started without the key requirements.
No message that limit exceeded usage.
MAC OS 10.10.2
russian languane
I need to buy more Creative Cloud ?!Hi, Tnank You for answer,
Well, then I have a problem I can not run Ps on the second Mac, required or buy, or enter the code ... What do I do? -
I can't install the new itunes after downloading the message says "this saftware requires mac OSX 10.6.8 or later" I have a new iphone 5 that I can't use until I update my itunes. What do I do?
You will need to Upgrade to Snow Leopard to get a Compatible version of iTunes to Sync your Device.
Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading... -
I have a MAC PRO and a MAC AIR all dedicated to the same I cloud/Itunes account. i purchased i photo on the air but can i install it on the PRO free as i have already paid for it on my account?
Yes if your system minimum reguirements for hardware and software
LN -
I have a macbook pro and I want to use my canon firewire digital video camera on yahoo chat. When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook. Can I override that default?
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
Older Digital Video Camera - no firewire port
I have an older Sony Digital Video Camera and a MacBook Pro with iDVD"08 and I want to transfer my tapes to DVD using OneStep DVD. The camera has a USB port, but no firewire port. Is there an adapter I can get or some other way to use OneStep DVD?
I also have a Mac Mini with iDVD6.I have the same problem and I have a new Sony HDR-SR7 HDV Camera.
In the past iMovie and iDvd (for example iLife '06 and earlier) worked mainly via firewire when it came to importing or capturing video. It is still the preferred protocol on most macs. And it is what I continue to use on all 4 macs in my home.
However, in order to compete with most PC's as well as changing market conditions; USB 2 was only recently incorporated into the macintosh platform with the introduction of iMovie 7 (I'm guessing it was done to appease camcorder manufacturers that only supplied internal Hard Drives and USB2 ports and dropped FW connectivity altogether as a cost cutting measure and not necessarily because USB is a better than firewire (which it most certainly is not). Keep in mind iMovie 7 now allows for capturing video via USB2 when connected directly to the camera but it won't allow you to create custom chapter markers (unless one uses Garage Band to perform this much needed function). Nor will USB2 allow you to export your finished i-Movie back to the camcorder (at least not on most macs). Apparently this particular feature was also dropped when writing this newer iMovie software.
Nevertheless, iMovie 7 will allow you to share / export the finished iMovie (and automated / interval chapter markers) to iDvd'08. But for those of us who still prefer to use Firewire over USB2 as well as maintaining custom chapters, apple does offer iMovie 6 as a free download (provided one has already purchased iLife'08).
http://www.apple.com/support/downloads/imovieHD6.html
If your camcorder has no FW ports, your best remaining option (short of buying apple's pro apps / exchanging for a camera that has firewire) is to use the existing USB2 interface to connect your camcorder directly to your mac and apple's latest software / iMovie 7.
http://support.apple.com/kb/HT1014
http://docs.info.apple.com/article.html?artnum=305919
Hope this helps but if not just come on back.
Message was edited by: SDMacuser -
I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.
"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print! -
How can I connect my Powerbook or iPad Retina via HDMI cable to 4K digital video camera to be a "control monitor"
That won't work with the iPad, unless maybe there's a "control monitor" app somewhere.
-
when i pluged in my ipod,computer start scanning,without finishing scan,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,
What the message says. In iTunes g the the Store tab in ther upper part of the screen and then clink on Authorize this computer.
-
I have installed a new version of an APP (mViewer). This app allows me to view security cameras in my office from anywhere. I've tried installing several times, put in all the information, including passwords, but cannot get it to work either on my iPhone or iPad. Is anyone familiar with this app? Thank you.
I don't know this app, but I did look it up in the iTunes Store, thinking I would suggest you could visit the developer's (vendor's) site and seek assistance there.
But when I found the app and went to the vendor's site, I found garbage (nothing useful).
Oh well. -
I've got a 17" Mac Book Pro with Snow Leopard and Final Cut Studio 2 . Compressor 3 is only giving MOV-1 which are no use to me. So I've bought Compressor 4 from the App store which it says isn't compatible with the graphics card on my 2008 mbp. Can I
Install a new graphics card on my computer if so which one? If not can I solve the MOV-1 problem ?
Thanks in anticipation
John LawrenceAsk here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Maybe you are looking for
-
I cannot "scan to computer" with my HP Officejet Pro 8600 N911g ) - The option has been enabled
I cannot "Scan to Computer" with my HP OfficeJet Pro 8600 N911g - The option has been enable in the HP Utility - but I receive a communication error message - I'm connected to the computer using a Linksys Wireless Router and I am using OS X 10.5.8 -
-
Hi All, I am working on SPML module of OIM. Really appreciate if someone could tell me the madness behind my curiosity 1. Through SPML can we set/recover User's Challenge Question answer? I went through the search query response and couldn't ab
-
Business System Creation in QTY Environment
Hi, We created the Business system for SAP R/3 in DEV Server of XI in SLD as BS_SAPDEV300 Now its the time to Export the BS From DEV to PRD for further use. After we Export and Import the BS From DEV to PRD, We have the BS Name in PRD Server as BS_SA
-
Hi, I have noticed that the "Check Word" for the Bank ID for Mobile is not automatically breaking through normal sleep mode or when placed in the DK48 Charger: I'm bound to pick up my Z3 Compact , tap the front and Swipe the display before the "Check
-
Is there a way to import .AI file with layers attached?
Currently when I open .ai file, all the layers are gone. Is there a way to maintain those layers in Photoshop CS4 or CS5?