Can i install a ssd drive on my hp DV4-5008tx

Hi, currently I am using hp Pavilion DV4-5008tx notebook pc I was wondering if i can install a SSD in my laptop for better performance. Is there any space to add hardware in my laptop ?
This question was solved.
View Solution.

Hi,
You have to SWAP out the existing HDD to have room for a new SSD.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can I install an SSD into my MSI GE620DX laptop?

    Can I install an SSD into my MSI GE620DX laptop?
    Couldnt find any information on the site or the manual about that, Im thinking of ordering an SSD but I dunno if I can put whatever type of SSD in there.
    The 128gb SSDs in sweden are just in my price-range right now and it would be reeeally nice to check out how fast this thing can run... :D.
    My laptop is the i5-2410m-version.
    Reason I wanna upgrade to SSD is obviously because of improved performance but also that I can probably turn the current built-in HDD into an external device maybe? I am setting up my laptop for music production and I just want a fast SSD for windows,software. Other HDDs for recording audio, having projects on them and so forth.
    The HDD in mine is the 500gb/7200RPM one, I hope I can turn it into an external somehow(read that you can somewhere and I assume most drives can be turned into external HDDs???)

    Shouldn't be any problem. You can replace the 2.5" HDD of your notebook with any 2.5" SSD. Be aware that you need to reinstall Windows unless you have a software to clone the current on the SSD.
    With an external USB hdd case you can use the HDD as an external drive. However if you erase the current partitions you will loose the possibility of using the F3 recovery with the HDD reinstalled if the Windows on the SSD gets destroyed by a virus or similar problems.

  • How do I install a SSD drive - the Bios does not allow changing to AHCI mode

    I have a Windows 7, HP ENVY approx 1.5 years old.  I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
    How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?

    Hi:
    AHCI is enabled by default on today's HP consumer notebooks.
    Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
    Paul

  • Will they install an SSD drive for me?

    Hello,
    I'm thinking of buying a 2.5" SSD drive for my Intel-based iMac - will the Apple Store install it and move my existing HD to the slave bus for me? I've still got AppleCare left.
    If so, how much would they charge me for?
    Also, is there an eSATA solution for iMacs?
    Thanks
    Georgios

    The simple answer is no they will not because it's not something they sell. Also I don't believe a 2.5" SSD will fit, the bay is designed for 3.5" hd's. Regarding eSATA drives, again your iMac does not have an SATA port on the back so it will not support an eSATA drive, however if you have an iMac with a FW 800 port that would fine, while not as quick as SATA it's a good solution.
    If you still want to go down the SSD path then you can look to see if there are any repair centers in your area that will do the work. That being said if your machine is covered by warranty I'm pretty sure installing a SSD drive would void it.
    Regards,
    Roger

  • 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

    Currently running macbook pro 2.4Ghz intel core i7 15'' Late 2011. Wanted to know if and how so (if so), 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

    To installing a SSD, yes, it is possible. See this link to read more.
    There are also quite a few YouTube videos on the process.
    To the second, no, it's not possible to replace USB 2 with 3 without replacing the system.
    Regards,
    Gnomish8

  • Can I install a super drive dvd buner?

    I have a G4 (466 MHZ) I would like to buy a digital movie camera and make DVDs on the computer from video I have taken. I do not have a dvd burner in the G4.
    My question: Can I install a super drive or use an external dvd burner with the current computer?
    Thank you.
    G4 - 433mh   Mac OS X (10.2.x)  

    Fred's reply is 2007 , but a few years ago, I used my ol' reliable friend, my Cube/450 for creating DVDs.. it needed a looooong encoding time (usually over night), but it does work ...
    but...
    with 10.2, use old versions of iDVD (4 or 2...)
    don't upgrade to QT 7...
    be sure, the internal drive has allways 10, better 20GB free....
    and, iDVD≤5 does not support external, firewire connected burners... so, if you're able to use a screwdriver, install any nice Pioneer at a free internal IDE connection; or, dare to use a 'hack', http://patchburn.de/ (english spoken), to teach iDVD4 to use external drives...
    ... that's all not state of the art, lege artis ... but... for less than 50$ you get a DVD-burning Mac..
    ... a slow burning Mac ...

  • Can I install an SSD (mSATA 3.0) in HP dv6-6190?

    can I install an SSD (mSATA 3.0) in HP dv6-6190?

    Hi,
    Based on the following link, no, it does not have mSATA slot:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02863104
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How many IDE drives & CDrom can be installed with SATA drives??

    How many IDE drives & CDrom can be installed with SATA drives??
    i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
    & if it can be added, can i install 2 SATA drives???
    THX in advance

    The 3 versions of this board that are available are:
    875P Neo-FISR (PCB 2.0)
    875P Neo-LSR (PCB 1.0)
    875P Neo-FIS2R (PCB 1.0)
    All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
    2 x SATA (Supporting 2 SATA HDD drives)
    2 x PATA (Supporting 4 IDE devices)
    All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
    ->INTEGRATED PERIPHERALS
    ->ON-CHIP IDE CONFIG
    ATA CONFIG: S-ATA ONLY or P-ATA ONLY
    S-ATA/P-ATA KEEP ENABLED: YES
    OPERATE MODE:
    If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
    If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
    2 x SATA (Supporting 2 SATA HDD drives)
    1 x PATA (Supporting 1 Master IDE HDD drive)
    The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
    So the answer to your origional question is:
    2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
    or
    4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

  • Can I install two mSata drives in a w520?

    Using the two pcix slots in w520 - can I install two mSata drives and perphaps even raid them? Thank you
    Solved!
    Go to Solution.

    You can not. The W520 has only one full sized mSATA slot.

  • HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

    tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

    dsharp14 wrote:
    tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
    What are the specs on your Mac?  Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
    Thanks
    Pete

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

    Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

    Run_Esperanza how much space do you still have available on your primary drive?  It is possible to customize the installation destination within the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
    Please be aware that you will need disk space on the primary drive to installed shared components plus contain the temporary files for installation.

  • Can I add an SSD drive to an Omni 27?

    Can I add an SSD drive to an Omni 27 (1200ev)  or do I have to replace the original drive? Ideally I'd like to retain the 2TB hard drive and have at least the OS on the SSD. Kind Regards, Brad

    Hello Serguey.  I understand you'd like to add an SSD to your system.
    Hard drives today use what is called a SATA connection.  Normally, you could not add a hard drive to one of these connections.  However, I believe you could add an expansion card to the slot which would give you more SATA connections.  Here is a link which contains products which fit this description.
    However, I have a feeling that this card would not work very well because this is an All-in-One unit and it has a very limited amount of space inside.
    Is there a reason you wanted to add an extra SSD as opposed to upgrading your main hard drive to an SSD?
    I am not sure of any way to power off the monitor with the computer on other than by adjusting your power plan's settings.  This Microsoft article contains more information about power plans.
    Let me know if this helps and have a great day!

  • Lenovo b560 can't install nvidia display driver

    hello i've learned that lenovo b560 computers got 2 graphic cards one is intel hd graphics other is nvidia 310m but i can't install the nvidia driver it always gives the no compatible drivers found error :/

    hi Frost1,
    Welcome to the Forums.
    The B560 with Intel+Nvidia graphics uses the Nvidia Optimus Technology to switch between the Intel GPU (for power saving) and the Nvidia GPU (for applications that requires more processing power).
    If you have Windows 7, try the following:
    1. Restart the machine and hit F8. On the menu, select "Disable driver signature enforcement".
       - Sample image
    2. Install these drivers then reboot:
    1st:   Intel Onboard Graphics Driver for Windows 7 (64-bit)
    2nd:  NVIDIA Display Driver for Windows 7 (64-bit)
    If you still get the error, can you PM me your serial number or indicate your machine type (e.g., 0679-3JU) to check the PC specs.
    Regards

  • Can I install a SSD on an optical drive in a HP Envy Phoenix

    I just purchased a customized HP ENVY Phoenix Desktop - 810-350se CTO with a Raid 5 configuration (3 x 2 TB), but I noticed and researched that it seems that is better to have a SSD installed to have your computer access data faster, of course, I want to use it for the OS installed on it.  So I have two questions?
    1.) Can I change the configuration so I can add an SSD on a optical drive? (This will be the 4th drive). Since I am already using 3 HDD on a Raid 5 configuration and there wouldn't be any more space left, I am assuming that I can only use an empty optical drive space and install an SSD?
    2.) Is there a limitation of how many drives and capacity HDD can be installed on the motherboard? 
    My proposed solution is to keep the 3 HDD and install a  4th drive (SSD) on the optical drive and use it for the OS (Windows 8.1).
    Any suggestions and/or recommendations is highly appreciated it.
    Thank you.
    3rd Generation Intel(R) Core(TM) i7-4960X processor
    •4TB 7200 RPM SATA 6G RAID Hard Drive
    This question was solved.
    View Solution.

    Hi,
    Your PC is already using a Windows 8 boot loader and if you load the SSD in UEFI mode then you will add another Windows 8 boot loader to the eligible boot device menu.  This will lead to confusion.  I would suggest that you avoid this situation by trying the following procedure:
    Be sure to create the external HP recovery media
    Install the SSD on port 1 or 2
    Disable secure boot in the BIOS and switch to legacy mode
    Boot into the Intel OPROM and rebuild the RAID 5 array
    Boot back into the BIOS and enable UEFI mode
    Boot the external HP recover media and load the SSD (SSD recommended size is 240 GB or larger)
    Once you are up and running then go into Disk Management and format the RAID array as GPT
    The above procedure may or may not work but it's what I would first try.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for