Can I install an SSD into my MSI GE620DX laptop?

Can I install an SSD into my MSI GE620DX laptop?
Couldnt find any information on the site or the manual about that, Im thinking of ordering an SSD but I dunno if I can put whatever type of SSD in there.
The 128gb SSDs in sweden are just in my price-range right now and it would be reeeally nice to check out how fast this thing can run... :D.
My laptop is the i5-2410m-version.
Reason I wanna upgrade to SSD is obviously because of improved performance but also that I can probably turn the current built-in HDD into an external device maybe? I am setting up my laptop for music production and I just want a fast SSD for windows,software. Other HDDs for recording audio, having projects on them and so forth.
The HDD in mine is the 500gb/7200RPM one, I hope I can turn it into an external somehow(read that you can somewhere and I assume most drives can be turned into external HDDs???)

Shouldn't be any problem. You can replace the 2.5" HDD of your notebook with any 2.5" SSD. Be aware that you need to reinstall Windows unless you have a software to clone the current on the SSD.
With an external USB hdd case you can use the HDD as an external drive. However if you erase the current partitions you will loose the possibility of using the F3 recovery with the HDD reinstalled if the Windows on the SSD gets destroyed by a virus or similar problems.

Similar Messages

  • After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

    After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

    You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
    EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
    Check out this link of machines and their EFI versions
    https://support.apple.com/kb/HT1237
    Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
    The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
    Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
    https://support.apple.com/kb/HT2213
    You need to learn all about cloning etc., as you have no other means to boot the machine.
    https://discussions.apple.com/message/16276201#16276201

  • How do I install an SSD into my 2007 Macbook?

    Hi All,
    I did some searching online, but couldn't conclusively find a step-by-step procedure to installing an SSD into my 2007 Santa Rosa Blackbook.
    My mac has been running slow, and I've upped the memory to 2gb (I will be upping it to 4 shortly), but also wanted to consider an SSD as well. I know how to physically install the SSD, but my questions are:
    Will it work with my specific macbook?
    I have Snow Leopard 10.6.8, will that have this "TRIM" update for SSDs?
    Do I have to contact Apple for a Snow Leopard boot disk?
    With my mobo, is my speed limited to SATA I? I heard about a possibly way to up it to SATA II but not sure about this...(is it true?)
    I heard we have to format SSDs before we can use them. If I manage to get a boot disk from Apple, can it handle the formating after turning it on with the new hard drive (through BIOS)
    Lastly, any make and model you guys suggest? There's no point for me to get at SATA III, so I don't want to spend a lot of money. Let's assume 80 - 120 gb for now.
    Any help or step-by-step instruction would be terrific!
    Thanks a bunch!!

    Hey Eric,
    Thanks for the link! Though, I actually know how to physically install the SSD. It was my other questions that I'm getting puzzled by. Any ideas on those?
    EDIT: Actually, it answered one of the questions about transferring my data, so cool!
    Thanks!

  • I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

    I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

    It will make it easier to help you w/ your problem to know the  size and RAM installed.
    "Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
    What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
    I'd say Lion if your Garmin is compatible.
    Both Lion and Mountain Lion are downloadable from the Apple Store:
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    The OSs will get more resource hungry the higher you go.

  • 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

    Currently running macbook pro 2.4Ghz intel core i7 15'' Late 2011. Wanted to know if and how so (if so), 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

    To installing a SSD, yes, it is possible. See this link to read more.
    There are also quite a few YouTube videos on the process.
    To the second, no, it's not possible to replace USB 2 with 3 without replacing the system.
    Regards,
    Gnomish8

  • Can I install an SSD (mSATA 3.0) in HP dv6-6190?

    can I install an SSD (mSATA 3.0) in HP dv6-6190?

    Hi,
    Based on the following link, no, it does not have mSATA slot:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02863104
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I would like to kwon can I install Microsoft silverlight into ipad2

    I would like to kwon can I install Microsoft silverlight into ipad2.

    Is it available in the App store? Is, yes you can, if it is not there, no you can't.
    Stedman

  • Can we install exchange infrastructure into existing server?

    can we install exchange infrastructure into existing server?
    I have installed ECC6 IDES,now I want to install XI, Can I install it to ECC6 IDES server ?
    how to install ?

    Hi
    Check this note may help you
    Note 883948 NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
    Regards
    Uday

  • Why I can not install the iTunes to my new 64bit laptop??? I have never had this kind of problem before on my 32 bit old laptop...

    I would like to get a help... I can not install the iTunes to my new (64bit) laptop... Why??? The installation stops somewhere after a few minute, looks like trying to install but can not go through until the end. I had my old (32bit) laptop and i have never had any problem with the installations... My new laptop is Asus (64bit), and the operating system just upgraded from Win8 to Win8.1....

    Hello rafaelfromweymouth
    Start with the first article and clear out any files in the Temp folder. You may need to remove iTunes and its related software and finally make sure that you have the 64-bit version of iTunes downloaded to install.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    iTunes 11.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Regards,
    -Norm G. 

  • Can't install itunes on my 64bit windows 7 laptop

    Can't install itunes on my 64bit windows 7 laptop. Says there was a problem with the windows installer package and a program required for this install to complete could not be run..
    I have uninstalled and re-installed several times now already using the add/ remove programs under control panel..

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Can I install PSE 13 on both my desktop & laptop??

    Can I install PSE 13 on both my desktop & laptop??

    Yes, you are allowed two installations.  If a download, they need to be the same operating system (either Windows or Mac).  If from the disc, then it doesn't matter which operating system.

  • Can I install my Lightroom 5 upgrade to my laptop and desktop?

    I have lightroom 4 already installed on Both my desktop and laptop, if I buy the lightroom 5 upgrade can I install it on BOTH my desktop and laptop computers?
    Thank you.

    Yes

  • Installing a ssd into a mid 2010 15 inch MBP with a clean Mavericks install

    I have the above mentioned computer, and it is beginning to show signs of hard drive issues.  I have tried to repair it with disk utilities, but it won't and says I need to reformat.  The current hard drive is a seagate hybrid with a little ssd and a 750 gb 7200 rpm drive (the original drive was cloned over, so this hard drive's software has been in use through updates and new OS's for a little over three years now).  I am running Mavericks now with no problems, but I wanted to do this before a catastrophic oops.  To be honest, the hard drive probably isn't bad, just had some os read/write errors over the years that have built up (probably because this was my first mac and I did not know how to use it at first). 
    How do I go about upgrading to the ssd?  Do I need to make a bootable usb stick so I can format the new drive and boot enough to download mavericks from the app store or does mavericks keep a portion of itself in the computer memory so it can help recover from a hard drive crash?
    Honestly, I don't know what other questions to ask (yet). 
    David

    The easiest way would be to put the SSD into a 2.5 enclosure then boot into the Recovery partition by holding down Command and R at boot. Use disk utility to prep the new drive then install to it.
    Those few errors you're talking about could be due to a faulty SATA cable. That will really show itself with an SSD, so if you get a lot of errors after moving the SSD in, that's a likely culprit.
    By the way, the easiest way to do this if you don't need a clean install is with Carbon Copy Cloner. Just clone your existing drive to the SSD.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_1?ie=UTF8&qid=1391917664&sr=8-1&keywords=2.5+enclosure+usb+3.0

  • Can I install a SSD on an optical drive in a HP Envy Phoenix

    I just purchased a customized HP ENVY Phoenix Desktop - 810-350se CTO with a Raid 5 configuration (3 x 2 TB), but I noticed and researched that it seems that is better to have a SSD installed to have your computer access data faster, of course, I want to use it for the OS installed on it.  So I have two questions?
    1.) Can I change the configuration so I can add an SSD on a optical drive? (This will be the 4th drive). Since I am already using 3 HDD on a Raid 5 configuration and there wouldn't be any more space left, I am assuming that I can only use an empty optical drive space and install an SSD?
    2.) Is there a limitation of how many drives and capacity HDD can be installed on the motherboard? 
    My proposed solution is to keep the 3 HDD and install a  4th drive (SSD) on the optical drive and use it for the OS (Windows 8.1).
    Any suggestions and/or recommendations is highly appreciated it.
    Thank you.
    3rd Generation Intel(R) Core(TM) i7-4960X processor
    •4TB 7200 RPM SATA 6G RAID Hard Drive
    This question was solved.
    View Solution.

    Hi,
    Your PC is already using a Windows 8 boot loader and if you load the SSD in UEFI mode then you will add another Windows 8 boot loader to the eligible boot device menu.  This will lead to confusion.  I would suggest that you avoid this situation by trying the following procedure:
    Be sure to create the external HP recovery media
    Install the SSD on port 1 or 2
    Disable secure boot in the BIOS and switch to legacy mode
    Boot into the Intel OPROM and rebuild the RAID 5 array
    Boot back into the BIOS and enable UEFI mode
    Boot the external HP recover media and load the SSD (SSD recommended size is 240 GB or larger)
    Once you are up and running then go into Disk Management and format the RAID array as GPT
    The above procedure may or may not work but it's what I would first try.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • HP dv6-6117dx, can I install an SSD in this? SATA 2-3.0 or SATA 3-6.0?

    Hi all, I read the manual for the dv6-6117dx laptop, and it stated only Intel based versions of this laptop were able to use SATA based SSD drives, but I think it was referring to SATA 6. Can I install a SATA 3.0 SSD in this laptop as I have a SATA 3.0 SSD 64GB in my desktop that I thought maybe I'd move over to the laptop, but not sure if this is doable due to the manuals reference to Intel only? I would think that an SSD at SATA 2.0 standards would work, but Thanks for any replies.
    AMD 3500M, 500GB SATA drive, 4GB ram, etc.

    Hi Pepe, a lot of confusion going on with the new sata designations. I think for everyone's information, I'll try to set the record straight as far as what I have read on the subject, and what the SATA committee, commission, or what-have-you, stated they would like people to refer to SATA standards as. Not sure these are set in stone, but I think they are. Please correct me if I am mistaken. I won't go into anything below sata 2.0 as I either didn't read that part or don't remember. lol
         SATA II or 2.0 refers to SATA 3Gbps not SATA 3.0 - Sata III or 3 does refer to SATA 3.0 which is the current top standard at 6Gbps, hence SATA 6. This is the way it was, but I think now, they have simplified it to either SATA 3 or SATA 6 so there is no confusion, 3 is 3Gbps - 6 is 6Gbps. This is what I read they would like drive makers to label their drives as, and skip the 2.0, and 3.0 monikers. There is also going to be, soon, if not already, SATA Express which will boost performance to 6Gbps, 8Gbps, or 16Gbps using the pci express slot. SSD manufacturers are making them faster, and faster which is good for us as prices on lesser drives will drop, hopefully, and we can use the express slot included in just about all computers, and not have to purchase a SATA 6 controller card.
         And thanks Pepe for reminding me I already knew the answer. The SATA standards are compatible across all speeds, and connections so an SSD should be no problem, but at SATA 3 or less speed, depending on what's in this laptop. I do know it has a SATA HD, and SATA DVD, but don't get why HP would not implement the 6Gbps standard which you, and the AMD specs say, is embedded in the chipset? I'm hoping maybe it's a bios thing or some other update that will fix it because if my current drives are running off an AMD chipset, and the computer has a SATA HD & DVD, then it stands to reason the hardware is there as SATA standards for the 3500m CPU chipset include it. Unless there is a different AMD chipset in here? Hmm, very thought provoking. Maybe I'll call tech support, and try to get an answer because it doesn't make sense at all.
         Anyhoo Pepe, thanks for taking the time to respond to this. Just trying to think why there would be no SSD drive availability on this particular laptop as opposed to one that is exactly the same except has an Intel chipset? I'm wondering whether HP cut some corners here as AMD's chipset, specification-wise, is superior to Intel's at this point in the game. Thanks again, and please, anybody, if you know the answers to these questions, assumptions, please cough up some info so I don't have to call Tech, and beg for tier 2-3 support. lol 
    P.S.. I love this laptop, and doubt any answer is going to make me return it, but I am curious as to why no SATA 6, and maybe not even SATA 3 when the chipset supposedly supports it, and there are 2 SATA drives already integral to the laptop. I am assuming on a laptop, the CPU's corresponding chipset would have to be installed. Given this has SATA drives in it, and a chipset supporting SATA connections, SATA 2.0 should work.
     =====================================================================================
    Also,  found this on Wikipedia
    SATA Terminology
    The name SATA II has become synonymous with the 3 Gbit/s standard. In order to provide the industry with consistent terminology, the SATA-IO has compiled a set of marketing guidelines for the third revision of the specification.
    The SATA 6 Gbit/s specification should be called Serial ATA International Organization: Serial ATA Revision 3.0.
    The technology itself is to be referred to as SATA 6 Gb/s.
    A product using this standard should be called the SATA 6 Gb/s [product name].
    Using the terms SATA III or SATA 3.0 to refer to a SATA 6 Gbit/s product is unclear and not preferred. SATA-IO has provided a guideline to foster consistent marketing terminology across the industry.
    What I origianlly read was the designations SATA 3 Standing For SATA II, 2.0 & 3Gbps, and Sata 6 referencing Sata III, 3.0 & 6.0Gbps, so Sata 3 & Sata 6 sound great, no confusion, no need for Gbps or Gb/s as seen above, SATA 3 & 6, and soon to be SATA Express 8 Gb/s & 16 Gb/s All Sata designations should be geared to actual throughput of the specification to simplify the juggernaut of unneeded information, and resulting complictaions. They should all be simplified as SATA 3, SATA 6, SATA E8, and SATA E16. Why complicate matters with revisions, etc, we all know what they mean when stated as I have layed out, at least IMO! lol Take care all This is off topic, but hope it helps some users understand SATA  terminology, and sorry Pepe for misleading you, and otherswith incorrect information provided in the topic of this thread.
    Forgot, this has USB 3.0 ports so I know it has the coresponding chipset for the AMD A8 3500M CPU which supports SATA 6. HP, please answer why this laptop will not allow install of an SSD rated at SATA 6, and possibly not an SSD rated at SATA 3?

Maybe you are looking for

  • How to use LDB PNP with ABAP objects in a program

    Hello, I am wondering if anybody has used the HR logical database(LDB) PNP with user defined ABAP objects in a program? I am using the FM- <b>LDB_PROCESS</b> but its not working. Also assigning PNP in the attributes section of the program -- so that

  • Read from Text File.vi adds spaces between characters

    I'm openning a text file in LabVIEW, and and need to parse some information from it.  However, when I open the file, there are extra spaces between the letters.  When I just open the same file with Notepad or Wordpad, the spaces are not there.  Is th

  • How can i make an apple id without visa card??

    how can i make an apple id without visa card??

  • Reporting on day

    Hi, Is there any option at the query level if I want to see the data based on day i.e., if user wants to see the records from 17/5/2002 to 23/5/2002 so along with the date it should also display day like Mon(17/5/2002) Tue(18/5/2002)

  • Smartform (printing plural result at once)

    Hello Experts I'm working on smartform programming at the moment. I call the function module to call smartform in LOOP like CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME' LOOP AT itab into WA. CALL FUNCTION function_name.  ENDLOOP. and I want to see plural