Can I install CS 5.5 in a multi-user virtual machine? (licensing question)

We have a single-user license for Creative Suite 5.5, but the role we use it for may be filled by different employees at different locations depending on circumstances. To make sure the application is available to whomever needs it, we'd like to put it on a VM, which would only be accessible to the single user who needs it at a given time. Is this permissible under the license?

Try if deleting the file/folder '\AUTORUN.inf' present at the following location, allows you to run the installer successfully -
"C:\Program Files\Common Files\Adobe\Bridge CS5.1 Extensions\Adobe Output Module\mediagallery\resources\flashgallery\AUTORUN.inf"

Similar Messages

Can't install drivers and software for hp c7180 on virtual machine with no USB port

I have a virtual machine running Windows XP to use some old software that isn't compatible with Windows-7. I also would like to print to my HP C7180 all-in-one printer from the XP VM. I downloaded the entire 520MB app and driver package, and then just the 72MB driver package, but both give me errors stating:
This system does not meet one or more of the minimum requirements needed to install this product. The installation cannot continue.
Requirement/Details and Guidance
USB Drivers/This computer does not have the necessary USB software support to allow completion of a USB installation. The installation cannot continue until this is resolved.
USB Hardware/Required Action: Click Cancel to exit this software installation. In order to install this device as a USB device, please refer to your computer documentation or USB add-in card documentation for more information about USB drivers.
I don't want to do a USB installation, but a Network installation as this all-in-one is connected only to my network.
Is there any way to force this software (with an option/switch) to only do a network installation? It never gets to the part where it asks what type of install where you can choose USB or Through the Network.
A link to where I can simply download the drivers that would allow me to print only would work as I can create a local LPR printer port using the printer's IP address.
Please advise...

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can NOT install Standard ONE on a 2 quad-core processor machine (licensing)

This is from Oracle's licensing (July 2009):
===================================
“When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket. However, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.”
This is also from Oracle's licensing (July 2009):
=====================================
“Oracle Database Standard Edition can only be licensed on servers that have a maximum capacity of 4 sockets. Oracle Standard Edition One may only be licensed on servers that have a maximum capacity of 2 sockets.”
Now, this is what it seems to be:
===========================
1 quad-core AMD/Intel Xeon chip counts as 4x0.5=2 sockets (reached the maximum capacity limit in the licensing terms) by simply using 1 (single) quad-core CPU box.
and that's it - you can NOT install Standard Edition ONE on a 2 quad-core CPU Linux box :(((((
For a AMD/Intel multi-core Linux boxes
===============================
it can be a single quad-core CPU box (4x0.5=2 sockets -- but, paying twice the processor license - because it is now 2 sockets) or
it can be a 2 dual-core CPU (2X2x0.5=2 sockets -- but, paying twice the processor license) or
it can be a single dual-core CPU box (2x0.5=1 -- paying only a single processor license)
I think it is time for Oracle to revisit the licensing terms for Standard ONE edition and change it to simple socket count (don't count the cores). It is getting more expensive to use Oracle Standard ONE.

zaferaktan wrote:
Everybody should also know - and OPN folks confirmed this morning - that an Oracle Sales person does not have the "legal" authority to overwrite what is written in OLSA. Sales can not rewrite the OLSA. However, Sales can request changes or addendums to the specific contract, which are reviewed by Oracle Legal and approved by Sales senior management (right up to Charles and Larry if needed).
That said, very few Oracle employees are allowed to discuss any aspect of licensing terms. The official first point of contact is Sales, and they may only be the carrier pigeon of missives from the authority.
When someone buys Oracle, OLSA is the only legally binding document. Everybody should keep the copy of the OLSA which is in effect at the time of their purchase, given that OLSA can be modified at a later date from the actual purchase.That happens to be true of any license or sales agreement, from Oracle or not. Also note that if you purchase support, renewals may affect the original OLSA.
And it's one of the reasons old timers in these forums (such as Dan and myself) will prefix nearly any license discussion in the forums with "check with sales" and suffix it with "and anything you hear on the internet is probably useless in a court of law when you get audited".
and after all that - thanks for digging into the details and posting them.
(With the warning to any others using the information that the facts need to be reconfirmed for each individual case and date. A judge usually frowns on a defense of "It happened to a friend of a friend of mine" or "I read it on the internet")
Edited by: Hans Forbrich on Sep 8, 2009 9:43 PM
By the way - what you write is a change of policy. At one time, a box that could support 4 CPU but only had 2 CPU installed would not qualify for SE1. Good news indeed.

Can't install Sound Blaster live 5.1 on Windows XP machine

Hi,
I've been using?Sound Blaster Li've! Platinum 5. on my pc running Win ME for years. I've just formatted the PC and installed Windows XP Professional on it and now when I try to install Sound Blaster from the original installation CD, I get the error "Sound blaster li've 5. is incompatible with this version of windows". It still allows me to install but then I get all sorts of errors when playing back audio files etc.
I've now?re-installed XP but obviously can't use Sound Blaster and I would really like to!
I'm a musician and not?technically minded?at all so any ideas would be greatly appreciated.
Thanks - Abrie

>Re: Can't install Sound Blaster li've 5. on Windows XP machine: Hi Abrie,
Is your sound card was preinstalled or was it come in a retail box?
If it is a retail version then you get the driver and applications (Win XP Professional 64 bit) from the below link.
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=572 &prodName=Li've! Platinum 5.&subCatName=Li've!&CatName=Sound+Blaster&VARSET= prodfaq:PRODFAQ_572,VARSET=CategoryID:
Please copy the entire tag (entire 2 lines)?above and paste it in the web browser and hit entre.
Please let me know whether it works fine or not.
Cheers
AW

Can I install clone of system on same HD as Time Machine for a repair boot drive?

Can I install clone of system on same HD as Time Machine so I can use the external as a second boot?
I have an external connected to new iMac and installed Time Machine on it. I then realized that I cannot boot from TM so can I clone my system onto the same HD as the TM is on? For purpose of rebooting so I can use Disk Warrior or other diagnostics?
Thanks.
Jeff

I did try that but the only options I was ofered were:
Restore from Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
I didn't want any of those options. I just wanted to boot from the external.
You used recovery option - that is not what you need for this. Follow lowluster's suggestion to create another partition on your external drive, then format it using Disk Utility if necessary (in your applications folder). After that, use CarbonCopyCloner or SuperDuper to create a bootable clone on the external while booted from the internal.
Didn't know TM was to be installed on internal boot. Thanks.
Isn't there an advantage to having it on an external as well?
Time Machine is an application program and installed on your internal by default. You activate it from there and it works on its own to create backups on an external drive. It backs up everything.

Can I install XCode 4.2 in a 10.6.8 machine where XCode 3.2.6 is already running?

Hi,
Can I install XCode 4.2 in a 10.6.8 machine where XCode 3.2.6 is already running?
antelojorge

If I recall xcode should may an uninstaller. But I believe you should be able to just run the newer installer. And it's not "running" unless you launch it.

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

How can i Install Liquid data 1.0 on Solaris 10(x86) Machine

Hi,
I have installed Weblogic 8.1 SP2 on a Solaris 10 x86 Intel Architecture platform. Now I am trying to have BEA Liquid Data for WebLogic 8.1 SP2 also installed on this machine. I couldnot find Liquid Data for WebLogic 8.1 SP2 for Solaris 10, although there seems to be one available for Sun Solaris (8,9,32 bit).
Q1) I understand these are for SPARC and not x86 IA platform is that correct?
When i try to use this above file version to install on Solaris 10 i get the following error.
./liquiddata812_solaris1.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
./liquiddata812_solaris1.bin: /tmp/install.dir.1379/Solaris/resource/jre/bin/java: cannot execute
Q2) Is there a BEA Liquid Data for WebLogic 8.1 SP2 available that can be installed on Solaris (9 or 10) x86 IA.
Thanks
Sandesh

http://edocs/liquiddata/docs81/install/prep.html#1039271
It is not supported on Solaris running on Intel.
btw - AquaLogic DSP (aka LD8.5) is the current version. It is not supported on Solaris running on Intel, either.
- mike

Can I install OBIEE 11g and Database 11g on the same machine?

Hi experts
i have some confusion...
i have oracle database 11g on one of my server.
i want to install OBIEE 11g on that same machine...
i just want to be assure that will it cause any problem or conflict..
because i set ORACLE_HOMe=/home/oracle/app/oracle/product/11.2.0/dbhome_1
and i have to set ORACLE_HOME for OBIEE also....
Please let me know what how to give...and is there any other way
Thanks
Abhishek Anand

Hi Abhishek,
You can install or mount both DB and OBIEE on same machine, but check out the disk space and memory needed should be more to accomodate both.
Cheers,
KK

I can't install flash player with a non-administrative user

Hi,
in my job, we've just rebuild a server, with a clean Windows
2003 installation, all users are working with Terminal Server. The
problem is that we are unable to install Flash player in IE7 on a
user who have no administrative permissions but it works fine
firefox. It gives the following error (translate from spanish to
english ): "Error to copy Erma.inf. It's impossinle to copy this
file to the destination folder".
So far, we give permissions to all users in
C:\windows\system32\Macromed
Any idea?
Thanks for all

Hi G K,
Flash Player is not supported on any mobile device.
Maria

Can not see a sbRIO in MAX running on a virtual machine

I am trying to connect a sbRIO-9606 to a Windows 7 virtual machine (VMWare) running on a MacPro. I can open a CMD prompt and ping the sbRIO but when I run MAX, it does not appear in Remote Systems.
The virtual NIC is bridged to the pyhsical one (on the MAC)
Does anyone have experience doing this, or know why I cannot see the sbRIO?

Hi jaketc,
I've had similar issues at times depending on how my host and guest operating sytems network interfaces are configured. It sounds like your settings are correct (bridged), but it is difficult to guarantee. The first step I usually take is disable any network interfaces (on the host and guest OS) that are not critical to connecting to the remote target.
A more generic answer is to walk through the troubleshooting steps in this document, but it won't cover the virtualized OS considerations of your setup:
Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
Because you can ping the target, it sounds like the Single-Board RIO already has an IP address, you know what it is, and ethernet communication can be established. When I've been in that situation in the past, I've been able to manually add the RIO target to MAX. To find a system that is already configured with an IP address, simply right-click on Remote Systems and select Create New. Enter the appropriate configuration information in the dialog box, and MAX will manually place that system in the Remote Systems listing and all tasks will function properly.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

Can I install two independent instances of Thunderbird on the same machine?

It is required to install two instances of Thunderbird on the same machine, each with its own account(s), Profiles folder(s) and sign-on password, so that each of two users can securely use Thunderbird at different times..
How can this be achieved?
Thanks,
NMB1

The simplest method is to install Thunderdird normally from an admin account. The two or more users then use ordinary none admin accounts. Thunderbird will be available to each user and each OS account has a separate Thunderbird profile, so each user has effectively totally separate Thunderird accounts and passwords.
* See http://windows.microsoft.com/en-gb/windows/create-user-account#create-user-account=windows-7

Can I install a new internal HDD and reboot from time machine?

I'm away from home at the moment and my internal HDD has failed and I am putting in a new HDD I have the time machine backup on a external HDD but no OSX disks with me can I re boot OS from my time machine backup?

Allan Eckert wrote:
The only time the system on the DVD matters, is when you install from the DVD.
One exception: If you do a full system restore from a Snow Leopard backup using a Leopard Install disk, your Mac either won't start up or will kernel panic. See #E8 in Time Machine - Troubleshooting.

Can't install Exchange 2013 after previous uninstall (insufficient user privileges with the same user)

I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully completed and I could install Exchange 2013. Unfortunately I made a mistake with
the target directory and had to uninstal Exchange 2013. If I start the Setup again, it fails in prerequisite check - the current user should not be a member of Enterprise and Schema admin Group, but it's the same user, which comleted the previous Installation
of Exchange 2013! Do you have any idea how to solve this Problem - I'm running out of ideas.

Inhave tried to run setup /PrepareSchema again and get the following error in exchange setup log:
[03.07.2014 19:25:53.0305] [0] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0337] [0] Validating options for the 0 requested roles
[03.07.2014 19:25:53.0383] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0399] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
After removing all Exchange Parts by ADUC (advanced View) and ADSI Edit (Services) I'm able to install Exchnge 2013 again - the uninstall procedure seems not to work in a clean manner.

Can't install Photoshop CS4 I'm a new user can you help me?

I have download the CS4 Photoshop and when I try to run the set up almost finishing it sends me a message that says it can't finish because Adobe upgrade is in use. I've tried closing all the programs, even disconnect from wireless, what can I do?

Can you tell us the following?
Exact wording of the error message
Operating System/version
Processor
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Also you need to disable Flash player and Adobe reader and your antivirus software.
Further information is available in this installation troubleshooting guide:
http://kb2.adobe.com/cps/404/kb404127.html

Can I install CS 5.5 in a multi-user virtual machine? (licensing question)

Similar Messages

Maybe you are looking for