Can I install Elements 8 on my Macbook Pro?

Will I have enough room?
Thanks.

Also, my husband has it installed on his iMac.....can I install it also?  Not sure if it's okay to install on two computers in one household.

Similar Messages

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • Can I install Virtual Box on my macbook pro safely if filevault is enable? Lion w 8 g memory.

    Can I install Virtual Box on my macbook pro safely if filevault is enabled? Lion w 8 g memory.

    You are going to have to install Windows first.

  • Can't install adobe flash player on macbook pro

    Can't install adobe flash player on macbook pro. Installation file automatically runs through Matlab as a default program. What to do?

    I have this version installed on my MacBook Pro.  3.3.7.0 (3.3.7.0) I am using Lion OS X 10.8.4.
    I have followed the instructions from the Adobe site, The installation process completes. I click "FInish"
    I get taken to the Adobe website, http://get.adobe.com/flashplayer/completion/aih/?exitcode=0&type=install where I am told the installation is complete.
    I restart the computere just in case, go to YOuTube and blam. You need the latest version of Flash Player error shows up again to complete my frustrating loop.
    Under Applications on my Hard Drive, I have: AdobeFlashPlayerInstaller_11_ltrosxd_aaa_aih.dmg
    When I look at my downloads folder, I find Wccb63Gg.dmg.part
    I don't know what to do. I don't seem to have the same file name as others on this site for the download. and I can't find it anywhere.
    Thanks to anyone who can help.
    Ahulani

  • Hello. I need help! I can't install adobe flash on my macbook pro...

    Hello. I need help! I can't install adobe flash on my macbook pro.. What do I do?

    Find the Mac OS forum for your version / then find the notebook forums.
    Same question was asked a couple days ago. Think you can find it with Google search?
    Lion Communities
    MacBook Pro Apple Support

  • HT3986 can i install window 7 for 13" macbook pro

    can i install windows 7 for 13" macbook pro ? I got that in august 2012.

    Welcome to the Apple Support Communities
    You can install Windows 7 on your computer without any problem. First, determine if you need Boot Camp or a virtual machine > https://discussions.apple.com/docs/DOC-3321
    If you need Boot Camp, get a Windows 7 retail DVD, open Boot Camp Assistant and follow the steps to install Windows. If you want all the steps to install it, you can print this PDF file > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf. Windows 8 support will come with a OS X update.
    If you need a virtual machine, you can use Parallels, VMware Fusion or VirtualBox. All of them are paid except VirtualBox, and they work well with Windows

  • Can't install windows XP to a macbook pro with an Intel X25-M SSD

    It's a strange problem:
    We just bought some new unibody macbook pro 2.8Ghz machines, (4GB ram)etc. We also obtained some of the new Solid State Drives (SSDs) from Intel, the X25M-80GB.
    (part number: SSDSA2MH080G1C5)
    After installing the SSD into the macbook pro, everything works.....in OSX. Installation of 10.5.5 went without problem, all updates/firmware applied, everything works fine.
    The problems start when you try to install XP. We used the boot camp assistant, and created a 32GB partition, put in a XPSP2 disk, and start the installation.
    Everything starts up nicely and goes to the blue/white text based installer for XP. It loads drivers, and then reaches the point where it would ask you to select a disk to install to (where you would normally see the three partitions, 1 being the FAT32 you select as C:).
    However, what you get instead is an error message that: +"Setup did not find any hard disk drives installed in your computer...."+ and then you have to exit.
    If you use the original 320GB drive, everything works as expected, (nothing wrong with the laptop hardware, or the installation CD). If you stay in OSX, everything works as expected. (nothing wrong with the Intel SSD either)
    To further add information, we also installed the Intel SSD into a Mac Pro (2008) as a second drive, booting to a windows installation (through boot camp) on the first disk. Windows boots fine, but there is no sign of the other drive AT ALL. (not a driver issue here - there simply isn't any hardware here as far as windows is concerned.)
    That brought us to our conclusion that there is something awry in the BIOS/EFI
    being presented to Windows, that doesn't support the Intel X25M drive at all.
    However, there is no user customisation (or even access) to the settings or what's happening at that point in the boot cycle, so I'm unable to diagnose further.
    Given the Intel SSDs are using their SOC (system on a chip), (I believe - but I could be wrong on that one) perhaps that just isn't supported by the EFI?
    Would appreciate some advice on where to go from here? These SSDs cost about 1400AUD+ each, so we'd rather like to actually use them....
    I suspect we're asking/requiring for an EFI update.
    (to head off some questions: Yes, we've used different discs, and also different computers...The disk and hardware themselves are just fine. Also, the drive WAS formatted with a GPT paritition.)
    Thanks!

    From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
    http://discussions.apple.com/thread.jspa?messageID=8482110
    http://news.cnet.com/8301-13924_3-10026010-64.html
    http://www.intel.com/design/flash/nand/mainstream/index.htm
    http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
    I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
    http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
    That won't solve performance issues, but should work.
    http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
    "My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
    Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
    SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
    http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

  • How can I install Sims 2 on my Macbook Pro?

    I can't figure out how to install Sims 2 on my Macbook Pro.. Anyone know how?

    That game is over seven years old.  It can't run on any mac in OS X that has 10.7 or later installed.  Are you trying to install in OS X or in a Windows partition?  Also, what happens when it tries to install?  If it mentions something about "PPC", it can't run in OS X. 10.7 or later.

  • Can you install a mobile app on macbook pro

    Can you install a mobile app on MacBook Pro

    The IOS and Mac OS are completely different. Software written to run in one can't run in the other. The same is true of other mobile OSes and the apps that run in them.

  • Can't install Windows 7 on my Macbook pro.

    Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.

    Post here:
    https://discussions.apple.com/community/windows_software

  • I can't install Windows 7 on my Macbook Pro with Retina disaply

    Hello,
    I'm having a issue installing Windows 7 on my Macbook Pro with Retina (mid 2012), it has no CD drive so I'm able to use Disk-On-Key only.
    I've create a partition of 35GB in BootCamp for installing the Windows, then the Bootcamp is restart my machine, and bring me to the windows installer
    I got errors that the machine doesent recognize my hard drive.
    I would add some pics, but my installer is in Hebrew lang.
    please help me guys!

    Post here:
    https://discussions.apple.com/community/windows_software

  • How many times can I install mountain lion on my macbook pro?

    My Macbook pro came with lion pre-installed. However, I bought at a time that allowed me to update to mountain lion for free. Therefore, I wanted to know if I will have to pay to re-download mountain lion on my Macbook pro if I have to restore the system to its factory settings?

    No, since you have already "purchased" (even if for free) 10.8 on the App Store with your AppleID, you own it, so you can reinstall as much as you want.
    Matt

  • Can I install Snow Leopard on a MacBook Pro 2.0GHz quad-core Intel i7?

    I need to reformat my MacBook Pro 2.0GHz quad-core Intel i7 with OS X Lion with Snow Leopard in order to install Final Cut Pro Studio 2. Does anyone know if this can be done? Thanks in advance!!!

    Hi z,
    Contact Apple and ask them for the install disc that would have shipped with your machine if Lion had not been released. Others have been successful in obtaining the disc and installing SL.

  • Can't install Windows 7/8 on MacBook Pro 13 Mid-2009

    Hello I have a Upgraded 13-inch MacBook Pro, Mid 2009 (Core 2 Duo, 8GB RAM, 250 GB Samsung 840 EVO SSD) and I can't seem to install either Windows 7 or 8.
    Windows 7:
    I have tried many ISO's and Bootable USB creating methods, Including BootCamp, but once in the installation is progressing I ALWAYS get the following error:
    "Windows Cannot install required files. the file may be corrupted or missing... 0x80070570"
    When I use a DVD (Created on my PC using Windows 7 USD/DVD download tool) It gets to the installation screen but gets stuck at 0%, I left it for 3 Hours and it was still at 0%.
    I got Windows 7 running on VirtualBox flawlessly with the same ISO's without the above error.
    Windows 8:
    I have created Windows 8.1 Bootable USBs on my PC using various methods, I can view the files when on OS X Mavericks but when a Restart and Hold option I can't see the USB. I can't create a Bootable USB on my mac using bootcamp, I have unlocked the "Create a windows install disk" (but it's not windows 7 OR LATER) and when I try to crate it with my 8.1 ISO I get the error:
    "Boot Camp only supports Windows 7 installation on this platform. Please use an ISO file for Windows 7 installation."
    And when I use the DVD I created (On my PC) It gets stuck at the Blue Windows Logo
    NOTE: When I have my DVD (both windows 7/8) and they're stuck at their respective screens, I can hear the Disc spinning then stopping for a couple of  seconds and then spinning for a couple of seconds repetitively.
    Thank You In advanced.

    Hold your "Option" key down while starting your machine.  Continue to hold it down until you are presented with the boot menu which should allow you to select either OS X or Windows (provided you didn't somehow wipe your OS X partition).  When you get into OS X, you can go to System Preferences / Startup Disk.  Here you can select the default startup partition (OS X or Windows)... when you're installing Windows via BootCamp, it gets changed to Windows so when you finish setting up BootCamp, it automatically reboots and launches the Windows installer.  Installing all of the Windows drivers from the OS X DVD should provide you with a Startup Disk option under Windows as well.

  • Can't install mountain lion on my macbook pro

    Hey everyone,
    I have a serious issue since my last senior project my MacBook Pro 15" has been too hard to deal with it hangs a lot and I can't install any updates with out formatting my Mac and have a rough time with it lately I wanted to update my macbook to the latest version which is 10.8.5 and whenever I download that update from the App Store my Mac won't install it then it starts to hang and even hang on the start ups so I formatted it all over again and now when it reaches to the nearly end of the installation like 6 mins left it stuck forever and it writes 2hrs left... I would really be happy if someone can find an end of this drama cause am sick of it

    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

Maybe you are looking for

  • How to run a form using tree node selection??

    hi... i have populated a tree with all the form name.There is a particular id for every form.i want to show a form using tree node selection.What i did...i write a trigger in button's click event when the tree node is selected then i get a id.if id=1

  • Report remaining quantities

    Hi all, Is there any standard report with information about the delivered quantity the remaining quantity and the price of the remaining quantity per line in each purchase order? Thanks, Alberto

  • Converting Web Dynpro project into a Web Dynpro DC

    Hi I have a Web Dynpro project created. Now I want to convert it into a Web Dynpro DC (Development Component). Could anyone tell me if there is a standard procedure to do this? Right now, I am following the below procedure: Copy all the folders under

  • HTTP - RFC data problme

    Hi Guys, I have configured HTTP - RFC and i tested with Http cleint tool and i got the sucess return code. I saw in RWB and sxmb_moni and everything is ok. I have seen the response xml to the third party system and there are some fields where the dat

  • How to search a string in clob?

    I have the following example Table (column description is a Clob): id title description 1 test this is a large document with many chars above 4K. 2 test2 test this is a test select * from mytable where description like '%with%'; All the hours what i