Can i install gtx titan on mac pro*

can i install gtx titan on mac pro* help please
Thanks

that card does not have:
• EFI firmware to show a picture under Mac OS X
• at most two 6-pin aux power cables (the card has one 6 and one 8-pin, and requires BOTH which the Mac Pro cannot accomodate)
Without substantial modification it will not work under Mac OS X.

Similar Messages

Can I install leopard on new mac pro intel machine

This machine came with Snow leopard on it but it is conflicting with a USB 3.0 card I have been trying to install.
I THINK it is conflicting because I have a similar card on a 2009 Mac Pro intel,
running Leopard and I have not had one issue since installing IT, many months ago.
So I thought I would put in a new HD (larger 2TB) and start a fresh install and go down to the Leopard so the USB 3.0 PCI card will work!
When I do the reboot to instal from the disc, it just sits on a grey screen for 15 min before I gave up.
I replaced the Leopard disc with a Snow Leopard disc and the boot from disc went as normal.
So..........

Like I said, issues.
You and many others:
http://www.macworld.com/article/1165672/add_usb_3_0_to_a_mac_pro_with_highpoints _rocketu.html
50-50 here:
http://www.amazon.com/HighPoint-RocketU-Quad-USB-3-0/product-reviews/B005K8AXN6
Allegro doesn't fare much better:
http://www.amazon.com/Sonnet-Allegro-2-Ports-Macintosh-USB3M-E/product-reviews/B 0054D8G0E

Can't install Lightroom on my Mac Pro under Mavericks (all the rest of apps fine)

I cant' install Lightroom, when start downloading from the CC, stops at 42% and it says:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.1.0 Adobe Photoshop Lightroom 5.pkg_5.7.1 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
The rest of apps are doing fine..
Any ideas?
Thanks!

Hi Gustavo,
In addition to Jeff's suggestion you may also refer to the help document below:
Exit Code 7 when installing
You can also refer to the link below:
Lightroom Exit error code: 7 - Lightroom Forums
Regards,
Sheena

How would install iWeb on my mac pro.

I'd like to install iWeb on my mac pro. When I download the install, it tells me I can't install because i don't have a version. I know I don't have iweb on my mac. I want to know if and how can i install iweb on my mac pro. I'm running os 10.7.5. thanks

If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
OT
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay sleeping! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep. File sharing off. What else can help?

I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay asleep! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep. File sharing off. What else can help?

Hi fremley,
Thanks for visiting Apple Support Communities.
This article may be helpful with determining why your Mac Pro doesn't stay in sleep mode:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Some things reset the sleep timers, preventing the computer from sleeping:
Hard drive access (even if you're not using the computer, a running application might be accessing your drive, such as when downloading a large file or listening to music in iTunes)
Moving the mouse or using a portable Mac's trackpad, pressing a mouse button, or pressing a key on the keyboard
Some System Preferences settings (see below)
Open applications (see below)
Input devices (see below)
Expansion cards (see below)
Additional drives, such as USB, FireWire, DVD, or CD drives (see below)
Best Regards,
Jeremy

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Just download, install, and activate using your serial number. You are allowed to have the software installed and activated on two machines. If you do not wish to retain the original installation as a backup you can deactivate it by opening one of the programs and choosing Help -> Deactivate.
Here is a general link for where you can find download links...
Download and Installation Help -
https://helpx.adobe.com/download-install.html
If you would like a more direct link you will need to name the software and the version.
If you need your serial number you should be able to find it in your Adobe account online if you registered the software when you first installed it.

TA26404 I installed adobe on my Mac Pro but can't open it ?

I installed Adobe on my Mac Pro but can't open it

This is an iDVD forum. You shoud find the Adobe support website and ask there. When you do you should specify what Adobe application or software you're referring to.
OT

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

HT4809 My keyboard don't work after installing lion on my mac pro 2,6 any one a idea what to do ?

I have installed lion on my mac pro 2x quadcore 2.6 from 2009 and now i have to reboot my system sometimes to make my keyboard work.
Can someone help me ?
Mac 3,1 osx 10.7.3
Kind regards
Jan

I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

Install external drive into mac pro

I have stored my itunes library on an external hard drive and now that i have purchased a mac pro i would like to install the external hard drive into the mac pro and continue to use the drive for the library. The external drive is a deskstar in an enclosure that i can just slide it out of so i can install it in the mac pro. Will this work or is there a better way?

Turn off the option in the Advanced section of the iTunes preferences to copy the files to the iTunes music folder, and then drag the folder into the open iTunes window. This will not preserve playlists and other metadata.
(35337)

Have a student / teacher subscription. Trying to download and install applications on new mac pro with yosemite

Have a student / teacher subscription. Trying to download and install applications on new mac pro with yosemite. Old applications still work on older Mac Pro. Can't download any applications. Creative Cloud website and desktop app both fail. Very frustrating. Anyone having this problem?

Chas50 I would recommend removing the currently installed Adobe Creative software. You can then install the new versions of the Adobe Creative software included with your membership. You can find complete details regarding the uninstall and install process at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Confused about Install procedure on new Mac Pro

With 10.4 on my old G4 I would put the DVD in, hit install and the machine would restart. The installer could come up and I could select the disk utility and do a repair disk and disk permissions from the install disk before my actual install. With my Mac Pro, when I hit install from the disk it goes right into the installation process. I began that process thinking it would first restart the machine and give me a choice to access the disc utility first, but it looked like it was going straight to install. So I stopped the dang thing quickly. Now I've got this .DS_Store icon on my desktop that won't go away. A few questions...
1. How do I get to Disc Utility on the boot DVD and do maintenance?
2. How do I get rid of the dang .DS_Store icon on my desktop?
3. I'm experiencing quirky behavior on my Mac Pro, like jitters in Mail sometimes when I just open and start to scroll through notes in my inbox, slow opening of windows, etc., and my pointer suddenly going from the center of the screen to up to the top of the screen for no apparent reason. What is the best recommended repair and maintenance third-party utility for 10.6.3 Snow Leopard, to keep my Mac running optimally? I used to use SOCKS and Tech Tool Pro for 10.4.
Thank you so much for any help you can give me.
Leonard

Arch,
Every time I open Mail all the mail messages jitter for about 2 seconds, and my pointer, several times during the day, will jump up from, say, the middle of the screen to the top of the screen and I have to move it down. Odd. But it doesn't seem to be affected by how long I'm on the machine, or whether I just turn it on or whatever. Completely random. Plus, sometimes other drives won't open quickly... I mean I have another SATA drive that when I click on it, it won't open for about 6 or 7 seconds. The drive IS about 2 years old, it could be the drive, but it opened quickly on my old machine. That seems odd for a supposed speed demon like the Mac Pro. So I just wanted to run the Disk Utility from the install disk to try and see if that would stop these small issues. I brought a couple of apps over from my old machine. Photoshop CS and InDesign CS. I realize they aren't running optimum, and the new versions are native. But I can't afford them right now and I had several people tell me they will work, just slower. Is it just wrong to use them at all? These people are having no problems with them like I'm having. I did not use Migration Assistant. I'm using the mouse that came with my computer, with the scroll button top forward center. Yes, my only desire was to use the install disk to repair the disk as I thought a damaged disk would not repair itself as well as the install disk would. Would just a basic install work and get rid of these ghost icons?
Thanks again for your help,
Leonard

Can i install gtx titan on mac pro*

Similar Messages

Maybe you are looking for