Can I install iPlanet Application Server 6 on Solris on Intel

Can I install iPlanet Application Server 6 on "Solris on Intel".
Raj

Hi Raj, 
Sorry but unfortunately the short answer is no. 
The iPlanet Application Server is supported on 
UltraSPARC running Solaris 2.6 or Solaris 8 
or 
Windows NT 4.0 SP 5 
It's also available on HP-UX 11.0 and AIX 4.3.3 
but I don't know on which hardware 
You can check the documentation on http://docs.iplanet.com 
Hope this helps 
Caryl 
Sun Developer Technical Support

Similar Messages

I can't install the Application Server 8: ERROR - default domain creation

I am using Windows XP SP2 Spanish Version and I am trying to install Application Server 8. In fact, I installed with no problems first time. But then I had problems to start up the App server. I uninstalled the APP server and installed again and I got the following log with an error:
INFO - number of merged jar entries: 2675
INFO - number of merged jar entries: 1426
INFO - number of merged jar entries: 2459
INFO - number of merged jar entries: 1169
INFO - Start core server configuration.
ERROR - default domain creation returned following exception: abnormal subprocess termination: Detailed Message:La sintaxis del comando no es correcta.
(in english is something like "syntax error")
La sintaxis del comando no es correcta.
INFO - End core server configuration.

Can you please run the following command and see if that works (assuming you installed application server in default C:\Sun\AppServer directory) --
C:\Sun\AppServer\bin\asadmin create-domain adminuser admin adminpassword adminadmin --adminport 4848 domain1
If it does not work, can you please post the error message and its english translation?
Installer tries to execute the command that I listed above (obviously with the values you specified on the installer screens) and the error message seems to be suggesting that there is a syntax error in C:\Sun\AppServer\bin\asadmin.bat.

Error occur when installing iPlanet App server 6.0 SP2

Dear All,
I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
I choose typical installation and select default settings.
- install iplanet server
- typical install
- install ALL components
However, the following errors occur during the installation:
sh: ./pre_nas_preinst: not found
ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
ERROR. ...........
What's the problem with it? Could anyone help....?
Thank youin advance.
Thx & Regards,
Yvonne

I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

Iplanet application server 6.5 on windows xp

I'm trying to install iplanet application server 6.5 on windows xp. but for some reason it just hangs at the end of the install. Leaving my no choice but to quit the instalation. Has anyone sucessfully install 6.5 on xp? and could anyone help? would be appreciated.
Thanks in advance...

I've just spent a day or two mucking around with getting the iPlanet 6.5 Application Server install running with IIS on XP, and have got as far as having the "fortune" application running. I also encountered the "hanging installation" problem on my 5th or 6th reinstallation. Here is my checklist of things to do:
1. As has been pointed out earlier, you must have a static IP address assigned to the machine you are installing on.
2. You should set up IIS before installing iPlanet - during the install you'll be prompted to set up the Web Connector for IIS.
3. If you find that the install hangs at the end (seems to be in the middle of building the Start Menu shortcuts), then deinstall from the Control Panel | Add Remove Software and run the install in Windows 2000 compatibility mode - this article lays out how to start applications in compatibility mode:
http://www.microsoft.com/windowsxp/using/games/expert/durham_og.mspx
4. You need to switch IIS to run in-process as per these instructions:
http://docs.sun.com/source/816-5788-11/app1.html#14411
see the section "Registering the Plug-in on IIS 5.0 running on Windows 2000".
Note that in XP the tab is called "Directory" rather than "Virtual Directory" and ensure that you grant Execute Permission to both Scripts and Executables (default is just Scripts I think)
5. You need to grant security permissions to the registry key
\\local machine\\software\\iplanet\\Appserver\\6.0\\CCS0\\HTTPAPI
as per the post by Vaidyanathan Iyer :
http://swforum.sun.com/jive/thread.jspa?threadID=20660&tstart=90
Regards

Does anyone know where I can download the IPlanet App Server 6.0 SP3 to get rid of this f... SP2 installation night mare on win NT

Does anyone know where I can download the IPlanet Application Server 6.0 SP3 to get rid of this f... SP2 installation night mare on win NT

Hi,
You an download the iAS6.5 from http://wwws.sun.com/software/download/download/
There is no place where you can download the SP3. Anyway 6.5 has more advance features. Anyway SP2 works fine with win NT. If you have any specific problem with installation, you can point them out. I would suggest you to use 6.5 instead.
Thanks
parsu

Can't Load 3rd Party JDBC in iPlanet Application Server

I am trying to use a 3rd Party Type 4 Oracle JDBC driver to connect to a database in iPlanet Application Server 6.0 SP3. I used the jdbcsetup.exe tool to register the driver and used the iAS Administrative Tool to Register the Datasource.
External JDBC Driver Parameters:
Driver Type: OracleConnectionPoolDataSource
Driver Classname: oracle.jdbc.pool.OracleConnectionPoolDataSource
Driver Classpath: c:\src\jdbc\lib\classes111.zip
DataSource Registration Parameters:
JNDI Name: OracleConnectionPoolDataSource
DriverType: OracleConnectionPoolDataSource
DatabaseURL: jdbc:oracle:thin:@decipher:1521:csi
Code to Access datasource (Note: dsName=OracleConnectionPoolDataSource):
try {
// Define JNDI InitialContext object.
InitialContext ctx = new InitialContext();
ds = (DataSource)ctx.lookup("jdbc/" + dsName);
dbConn = ds.getConnection();
//requires all sql Statements to be manually commit(ed)
dbConn.setAutoCommit(false);
if(dbConn!=null)
System.out.println("Getting a connection from dds.");
catch (Exception e){
e.printStackTrace();
The Error that I am getting:
[22/Aug/2002 15:43:51:9] info: RLOPMGR-005: OracleConnectionPoolDataSource: CALLBACK FAILED: CreateObject
java.sql.SQLException: A. Couldn't load or create 3rd party class: oracle.jdbc.pool.OracleConnectionPoolDataSource
at com.netscape.server.jdbc.Driver.connect(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.createNewConnection(Unknown Source)
at com.netscape.server.jdbc.ProxyEvaluation.createObject(Unknown Source)
at com.kivasoft.rlop.ObjectPool.reserveObjectnative(Native Method)
at com.kivasoft.rlop.ObjectPool.reserveObject(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getFromPool(Unknown Source)
at com.netscape.server.jdbc.ConnectionPool.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
at com.netscape.server.jdbc.DataSourceImpl.getConnection(Unknown Source)
I would greatly appreciate any help on why I am getting this error. I am desparate!

I'm sorry but I'm not an expert......
As you know Classes12.zip contains two dir "javax" and "oracle".
So my path for driver is "/servers/jdbc/classes12.zip (or wath is contains).
In classpath variable in iasenv.ksh I put /servers/jdbc but it doesn't work.
I tried with /servers/jdbc/oracle/driver.....the same
Can you help me again
Thank you very much!
Massimiliano

IPlanet Application Server 6.0, SP3 and Struts 1.0

To all,
I've created a How To document and modified application zip file for running
the struts-example application on iPlanet Application Server 6.0, SP3. The
good news is that this "ported" struts-example also works on Tomcat 3.2 and
WebLogic 6.0 SP1!
Please read if you're interested at
http://www.icsynergy.com/downloads/index.html#struts-example.
Please note that we've created a "patch" for SP3 to fix a "bug" in iPlanet.
You can download this at
http://www.icsynergy.com/downloads/index.html#patch.
Have a good day,
Matt

Hi,
setup.exe has 3 types of installation modes, namely, express, typical and custom. But the ezsetup doesn't asks these questions. The difference between them are..
Setup.exe - Express - Asks fewer questions like, iAS username password, directory server username, password, product key etc
Setup.exe - Typical - Asks for same questions as of Express setup and few more additional questions and allows you to install iAS and use a directory server which is already installed.
Setup.exe - Custom - The most complicated and the highly interactive installation where it requiress 32-33 inputs from the user and fully customisable.
EzSetup.Exe - Doesn't have any sub option, doesn't allow you to use the existing directory server or web server, all it asks is 2 questions..., which directory to install and the product key.
Hope this helps.
Regards
Raj

Error while installing iplanet directory server 5.0

Hi I am trying to install iPlanet directory server 5.0 on my local machine.My computer name doesnot contain any domain name.it is simply like "ERT3210".
While installing Directory server it is asking for the computer name and if i give the computer name without domain it is not accepting.And i am unable to rename my computer name suffixing domain name as it is not contained in any domain..Now How can i give the computer name to install directory server?.Its very urgent for me.It will be great help if any one give reply.

Start/Stop Directory Server and Start/Stop Admin Server are usually present in My Computer/Manage/Services, just start or stop the service.
Assuming the install root directory is %LDAP_ROOT%
You could always create program icons for
1) start/stop dirrectory server
%LDAP_ROOT%\slapd-%COMPUTERNAME%\start-slapd.exe
%LDAP_ROOT%\slapd-%COMPUTERNAME%\stop-slapd.exe
2) start/stop admin server
%LDAP_ROOT%\start-admin.exe
%LDAP_ROOT%\stop-admin.exe
3) SUN ONE Console (iPlanet Console)
%LDAP_ROOT%\startconsole.exe
Gary

Installed Oracle Application Server 10g and Dev. Suite 10g to self practice

Hello,
I have Installed Oracle Application Server 10g and Developer Suite 10g on Windows XP 32.bit to practice Developer suite specially Forms and reports. Server has created the database by default.
My questions are:
1. Can i use default database for practice?
2. Which Configuration Assistants mainly i need to configure in this regard?
3. Do i need to install anything else?
I am newbie to Oracle trying to self learning.
Any help will b appreciated.
With regards,
MOHAMMED AJAZ.

hi
open the following pdf it will help u too.
http://students.heinz.cmu.edu/docs/Oracle_10g_R2_Installation.pdf
Can i use default database for practice?
Did u install oracle database? if not then it will be better please install.
sarah

Installing Oracle Application Server 10.2 for Oracle Database Lite

Can anybody please tell me how to install oracle application server 10.2 for oracle database lite (i use oracle database lite for my final project). I use wi-fi connection to synchronize between pda and my laptop as server. Should i install oracle internet directory before installing oracle application server? I have difficulties in installing application server, what are the options should i take in every page of installation? Thanks before.

Install with the base, do not select any other options. Only choose webcache if you require the use of a software load balancer.

IPlanet Application Server 6.0 Service Pack 3 Test Drive

Hi,
We are trying to port an existing web-app (runs on WebLogic and JBoss)
to the iPlanet Application Server platform.
We can deploy our app, but cannot access it once it is deployed.
Is the iPlanet Application Server 6.0 Service Pack 3 Test Drive "cripple
ware" or is it a fully functioning trial which allows you deploy new
apps to it?
Thank You,
Eric Kahler

Hello,
If the issue is looking up the bean and you are looking up the bean as you
would with JBoss or BEA:
String beanName = "Bean";
ctx = InitialContext();
ctx.lookup( beanName );
then you might have the problem there. Atleast this is what we have found
with beans needing to be convered. Change the lookup to be ctx.lookup
("ejb/" + beanName ); and you might be better. I haven't tried it on JBoss
or Bean but ctx.lookup( "java:comp/env/ejb/" + beanName) might work on all
the different app servers
TTYL, Jeff
"Eric Kahler" <[email protected]> wrote in message
news:[email protected]..
Hi,
We are trying to port an existing web-app (runs on WebLogic and JBoss)
to the iPlanet Application Server platform.
We can deploy our app, but cannot access it once it is deployed.
Is the iPlanet Application Server 6.0 Service Pack 3 Test Drive "cripple
ware" or is it a fully functioning trial which allows you deploy new
apps to it?
Thank You,
Eric Kahler

Deploying war file on iplanet application server 6.5

Hi ,
We are trying to deploy WebObjects application on Iplanet Application server server 6.5.
Steps we tried for deployment :
1) War file generated by WebObjects.
2) Started IPlanet Application server.
3) Opened the War file in the deployment tool.
4) Verified that the WAR file to be deployed using the verify option in the deployment tool(Verified successfully)
5) We tried to save the archive, then it throws an error saying "
"Invalid entry compressed size (expected 52 bytes but got 51 bytes)".
We ignored this message and proceeded further by clicking on OK.
6) Deployed the WAR file using the deploy option
7) In the deploy message box, it diplays that the application was deployed successfully.
Then we tried to access the application by trying the following url : " http://localhost/NASApp/<CONTEXT NAME>/WebObjects/<APPLICATION NAME>"
(eg : http://localhost/NASApp/SampleApplication/WebObjects/SampleApplication.woa>)
We are getting the error saying that " GXError". We are not sure whether the the above mentioned url is the correct way to access the application !
What we think the problem in deployment is
i) because of error while saving the WAR file (Invalid entry compressed size (expected 52 bytes but got 51 bytes)
ii) URL not appropriate
Other observations :
We tried to deploy to deploy sample application on Iplanet Application server. All these sample applications are deployed properly without the above mentioned error message. All these application are accessed by typing following url : " http:localhost/NASApp/<CONTEXT NAME>/<APPLICATION NAME>". IN all the sample application, url contains "NASApp" . We are not sure what this stand for and maps to. What we assumed is that it maps to the the iplanet app document root i.e "installedroot/ias6/ias/App"
The exception throw while saving the WAR file is " com.iplanet.ias.tools.buzz.util.ArchiveHandlerException"
Has any body who has tried this can help us?
Thanks,
Raju and Venkatesh

Hi,
First of all the application you are trying is from a WebObjects application server. I don't know how they package the modules and what is the format/file structure. I just went to their site, though they say that the WebObjects applications can be deploy on any J2EE Application server but still how they package and how they write the xml descriptors is not known.
Looking at your exception it seem that first it is something to do the war/jar archive file compression thing (as the deployment tool is not able to read the complete file) then comes the deployment descriptors.
I tried to get a few sample application from their site but I couldn't fine any, it will be great help if you can provide a WebObjects sample app to me (mail it to [email protected]).
Regarding the NASApp string in URL, it has nothing to do with document root of iAS and also installedroot/ias6/ias/APPS dir is not the document root of iPlanet app server, this is the place where it save/explodes all the archives (ear).
See iPlanet App server don't have any HTTP daemon to listen to the HTTP requests, so it needs a web server with a plugin (web connector) to forward the HTTP requests meant for iAS, and this NASApp string in the URL is the key to that.
All the URLs are first send to the iAS plugin (as configured in web server's obj.conf file) and plugin look for this NASApp string (configurable), if it is there in the URL then it converts the HTTP request and send it to iAS over a proprietary protocol (KCP), otherwise it gives the request as it is to web server to process it.
The NASApp string is a iAS registry parameter which you can change any time. And generally the context root part of the URL is the war file name (by default). So the typical URL for any web application (MyWeb.war) will be:
http://<host>:<port>/NASApp/MyWeb/<Servlet_name>.
I don't know why that extension "*.woa" is there. So if you send me a sample war file, I will be able to try it out.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India.

What is different between setup.exe and ezsetup.exe for iPlanet Application server 6.0 SP3?

iPlanet Application server 6.0 SP3 for windows versions.

Hi,
setup.exe has 3 types of installation modes, namely, express, typical and custom. But the ezsetup doesn't asks these questions. The difference between them are..
Setup.exe - Express - Asks fewer questions like, iAS username password, directory server username, password, product key etc
Setup.exe - Typical - Asks for same questions as of Express setup and few more additional questions and allows you to install iAS and use a directory server which is already installed.
Setup.exe - Custom - The most complicated and the highly interactive installation where it requiress 32-33 inputs from the user and fully customisable.
EzSetup.Exe - Doesn't have any sub option, doesn't allow you to use the existing directory server or web server, all it asks is 2 questions..., which directory to install and the product key.
Hope this helps.
Regards
Raj

Installing Sun Application Server 8.1 on Win2k3 Fails

Hi,
I have tried several times, 8 or more, to install Sun Application Server 8.1 on Win2k3 Server Standard Edition sp1. However, the install places the relevant files onto the disc only to remove them.
The archive I am using is java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise System could be completely installed
Pls Help.
Regds

Hi,
Java ES 2005 Q1 is not supported on Windows 2003.
Please use Java ES 2005 Q4 release.
If you still encounter problems, please provide the following details
- What type of configuration did you choose?
- Was there a Summary.txt file created where you installed Java ES?
(need to see contents of that)
- JDK1.5.04 is required so it is correct behavior that installer is placing that on your disk - further installation will not do this.
- Installation log can be found at
%TEMP%/SunJavaES.log
Reference: Troubleshooting chapter of Install guide.
http://docs.sun.com/source/819-1652/troubleshooting.html#wp999001
Hi,
I have tried several times, 8 or more, to install Sun
Application Server 8.1 on Win2k3 Server Standard
Edition sp1. However, the install places the relevant
files onto the disc only to remove them.
The archive I am using is
java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer
installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise
System could be completely installed
Pls Help.
Regds

Could I install Oracle Application Server 10g 10.1.2.0.2 x64

Dear Sir,
I have one server installed by Windows 2003 X64 and EM64T (Core 2 Duo Intel CPU).
Could it be workable to install Oracle Application Server 10g 10.1.2.0.2 (Itanium version) on
it (Windows 2003 X64 and EM64T (Core 2 Duo Intel CPU)) ?
Thank you very much...
Ke

Note that (as it is stated in the above certification matrix, point #19), you can only install a mid-tier instance there. Infrastructure installation type is not supported on it.
Thanks
Shail

Can I install iPlanet Application Server 6 on Solris on Intel

Similar Messages

Maybe you are looking for