Can i install leopard on external drive to recover files from internal hard drive

Ok i am havinga problem with laptop ... wont restart. Power on and mormal grey screen appears ... then a bar appears below the spining dashes and after a few increments the laptop automatically shuts down. Now is it possible to install OS on extrenal to allow me to access the laptops internal drive to save files?

Welcome to Apple Discussions!
Yes you can do that, though I'm not too sure that Iomega's firmware is up to date to do it. Be sure that any data you have on the Iomega is backed up elsewhere before attempting it. Some Firewire drives without up to date firmware from the manufacturer may become invisible and unusable after a software update on Mac OS X 10.3 or later. Also an AGP PowerMac needs its firmware updated while booted from Mac OS 9 before installing Mac OS X 10.2 or later:
http://docs.info.apple.com/article.html?artnum=86117
That said, if after testing you find it does work, you can switch booting between both drives using the Option key booting as described in the Startup Manager article:
http://docs.info.apple.com/article.html?artnum=106178
Leave OS 9.2.2 on your internal, and 10.4 on your external. That will be a lot easier than partitioning. Some information I wrote for others which can help you on your migration to Mac OS X is provided in this link below:
http://www.macmaps.com/macosxnative.html
If you really want to partition, be aware that only third party software is available to partition without erasing the entire drive, and you'll want to make sure additional partitions that will boot Mac OS 9 have Mac OS 9 drivers installed as my link above states. Whatever you do, be sure you have at least two copies of your data at all times:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Similar Messages

  • Transfering Music Files From Internal Hard-drive to External Drive

    Per the instructions in a Missing Manual Book, I copied my itunes music folder from my internal drive to my new, portable external drive. The files copied fine, but the book said all I needed to do to insure file recognition was to change the location in the itunes>preferences>advanced location, which I did. But the only way the files are recognized by itunes is to, song by song, direct itunes to the new file. Is this really the only way to have it recognize the files? Is there no automatic method? The book implies that all is needed is changing the preferences location.

    I'd make sure that the 'Keep iTunes folder organised' setting is on. (Preferences>Advanced>general)
    Failing that, make sure that the 'Copy files to iTunes music folder when adding to library' setting is also on.

  • I need to recover files from my Hard drive that stopped while decrypting. Enigma for the local computer shops too.

    Hello,
         Was running osx Lion, newest update. Using Hitachi 320 GB 5200RPM HD. I5, 4 gb DDR3.  Mac Book Pro, 13 inch, fall2011. Heres what happened:
    Opened Disk Utility Via Launchpad> Utilities upon normal boot into home screen. Ran Disk verify on Mactintosh HD partition and was told the disk needed repair. Restart, cmmd-R upon restart. Run disk utility, verify disk on  Main Disk (whole drive), Needs repair: run permissions repair, run disk repair. Completes both processes on my Main disk (the whole 320 GB).... Machintosh HD now is greyed out, and will not unlock with my password to run Verify Disk. Attempt restart in safe mode, fail. Disk utility refuses to recognize drive, Machitosh HD turns to Disk 13 after failed attempt. Select Macintosh HD, Turn off encryption. Attempt password access to unlock and mount, fail will not accept password.
    Trying from Terminal/ command line now via cmmd-r restart.... diskutil list.... sees Macintosh HD 3 tiers. will unlock Macintosh HD (bottom tier), but fails to mount.  Second tier, says decryption is happening, but no direction is given.
    What I have been told by the computer guys I tool it to is that the HD froze while it was being decrypted, and they cannot extract the data. There is nothing mechanically wrong with the HD. I had to buy a new HD, and Keep the old one with hopes of extracting the Data....
    What do I do here guys? How do I mount the drive externally to connect to my mac book pro?
    Is this drive repairable?
    What sort of file recovery program is going to get these files back?
    Why did this happen?
    Thank you guys in advance.

    You could create a new profile, remove the content, and replace it with the entire profile from your old drive.
    But you are only asking about bookmarks, though I expect you also meant to include your browsing history so you would want places.sqlite
    References:
    * Transferring data to a new profile - Firefox - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    * Creating a new Firefox profile on Windows - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * Profile folder - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Profile
    * Profile folder - Firefox - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Profile_folder_-_Firefox
    * Lost bookmarks - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Lost_bookmarks

  • I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

    I have stored everything on my Macbook pro in a external hard drive (Time Machine)  Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?    I need to know what to highligh, what to click on. 

    hirogliffix,
    take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

  • I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

    I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

    Was the entire folder copied including the iTunesLibrary.itl file?

  • Can I directly back up my itunes files to an external hard drive? To save my internal hard drive.

    Can I directly back up my itunes files to an external hard drive? To save my internal hard drive.

    If your intent is to remove the songs from your computer's internal drive you don't want to manually move them because iTunes won't know where they are. The safe way to perform this move is to start iTunes, open iTunes Preferences, and select the advanced tab. Plug in the external drive if it isn't already.
    Using the picture above as a guide, (1) click on the Change button and select your external hard drive. (I created a Music folder on my external drive because I keep more than just music on it). 2) Click to put checkmarks in the boxes marked (2) and (3) and then click on the Ok button. This sets the stage for copying the music to your external drive and will make sure all your new music is put there as well.
    The last step is to select the File menu, choose Library, and then Consolidate Library. This actually moves the music. Depending on how large your music library is and the speed of your external drive this will take a few minutes to a few hours.

  • Transferring some files from old hard drive to new mac book pro: How do I do this?  I bought a SATA Wire, and can't figure out how to get my files

    Hi there, my old mac book recently died and I opted to buy a new macbook pro, instead of pouring lots of money into the old computer.  I was able to get my hard drive out, and I bought a 2.5" Sata Nootbook Drive Upgrade Kit.  I have also installed superduper!....but I can't really figure out how to get everything to work.  I just want to be able to take some of my files from my hard drive, not everything...
    Any suggestions?
    Thanks!

    I don't know what a "2.5" Sata Nootbook Drive Upgrade Kit" is but if you have a internal drive you need to connect all you needed was a $20 IDE/SATA to USB adapter
    You don't need Superduper, that's software designed to clone a entire Mac's boot drive to a external drive for bootable backup purposes using the same machine/make/model.
    Since the new Mac is different than the old one you can't clone (well you could but it will break the machine) the old drive to the new one.
    However you can use the adapter above and software Apple provides in the Utilities folder on the NEW MAC, called Migration Assistant to transfer your User to the new machine.
    However this might not be the best course of action as it can transfer unwanted data and cause problems in the Library, old programs that won't run on 10.7, etc.
    You can simply create the same named user on the machine (System Preferences > Accounts) log into it and then connect the external drive with the adapter and copy the contents of your users folders over and place into the same.
    It's always good to have another Admin level user account on the machine in case the primary one has a User based issue and you need to log into the other and grab files. So if either manually or via using Migration Assistant you wind up with two user accounts on the machine, it's really not that big of a deal.

  • Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

    The circuit of my macbook is dead yet the hard drive is fine.  I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue.  Is there a cable i can connect to another mac that will let me transfer the file?

    There is another option if the Macbook will start up in Target Disk Mode.
    Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
    http://support.apple.com/kb/ht1661
    Firewire symbol:

  • I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

    i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

    Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
    (69695)

  • How do i transfer files from my hard drive to an external hard drive as FAT files?  Laptop hard dive is full and I need to clear space.

    How do i transfer files from my hard drive to an external hard drive as FAT files?  Laptop hard dive is full and I need to clear space.

    In Disk Utility use MS-DOS
    Try http://www.mactip.net/guide-how-to-format-an-external-drive-to-work-seamlessly-w ith-macs-and-pcs-without-third-party-software/ for additional directions.
    Allan

  • I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

    I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • How to migrate from internal hard drive to SSD (Solid State Drive)?

    I just bought 128GB SSD. I want to replace my internal hard drive with SSD on MacBook Pro. My internal drive has only Mac OS installed (no dual boot with Windows/Linux). Going forward I want to boot my Mac OS from SSD and use internal drive for backup purposes only. I read many forums regarding this here, but each one talks about different methods of doing it.
    * Carbon Copy Cloner for the Mac side (free)
    * Casper 6.0 for the Windows side (not free)
    * SuperDuper
    Can some one provide me with simple steps to migrate Mac OS along with my personal data from internal hard drive to SSD?

    Because Windows is not involved, you don't need Casper or anything else Windows-related.
    Use Disk Utility to repair permissions and repair the directory on your internal hard drive. Buy an external SATA hard drive enclosure* and mount your SSD in it. Connect it to the MBP and use Disk Utility to create a single GUID partition on it, formatting the partition Mac OS Extended. Use SuperDuper or Carbon Copy Cloner, it doesn't matter which, to make a bootable clone of the internal hard drive on the SSD in the external enclosure. Restart the computer holding down the Option key, and select the SSD to start up from; the purpose here is to verify that the SSD really is bootable. If that works OK, shut down, disconnect the external enclosure, and exchange the drives.
    *I recommend a FireWire 800 enclosure, but they are much more expensive than USB-only enclosures, which will work OK — USB is just slow.

  • [SOLVED] How to Restore Folders/Files from a Hard Drive

    I broke my system today; it won't boot into any run level. Rather than try to fix it, I'd like to just pull off the 4 or 5 MB of files that are on the hard drive. The partition they are in was formatted XFS. I have the 2008.06 ArchLive CD - is it possible to access files from the hard drive after booting with an ArchLive CD? If so, I could just scp them to an external server. Any help is greatly appreciated. Thanks.
    Last edited by tony5429 (2008-09-28 04:52:39)

    You should be able to mount the partition once you've loaded up the live CD. Just figure out which one it is by using
    fdisk -l
    then mount it to /mnt or wherever you want it.
    As for moving/saving them, I'm not entirely sure how to get them onto an external server. You might have to mount another partition in order to install any apps that you need to connect to an external server, but wait for someone who really knows to answer before you try it. If you're only talking about 4 or 5 MB, I would just mount a USB stick and dump them on there.
    Last edited by Xyne (2008-09-28 03:38:02)

  • Safari & FireFox  freeze when I try to upload a file from my hard drive.

    Safari & FireFox freeze when I try to upload a file from my hard drive. This just started happening in the past couple of days. I haven't installed any software, or made any updates (that I can remember.) When the browser freezes I can't "force quit" them. I have to manually shut the computer down are restart it. I would appreciate any help you can provide.

    HI and welcome to Apple Discussions...
    Safari and Firefox box.... it could be a problem with the hard drive itself, not your browsers.
    Just to make sure, boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors Disk Utility reports.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
    Carolyn

Maybe you are looking for