Can I install new/different software in home hub 2...

Hi all,
I want to remove/unassign ports that have been associated with games and application previously used, but unfortunately my home hub 2 (Software version 4.7.5.1.83.3.37 (Type B)) does not provide this function!
Apparently it is a bug in the Type B where once a port is assigned, it can no longer be used / assigned to a new/different application!!! Stooopid!
Does anyone no if it is possible to install new software that would provide this functionality? maybe home hub 3 software? if this is even possible... Or, (this is probably the wrong forum to be posting this in lolol) is there a way to hack the hub 2 to run different software all together, Linksys maybe?
It would probably just be easier to go out and buy a Linksys router lol.. but I like to break things!

I doubt there are any custom firmwares for the homehub. As I've explained it's a consumer grade device which isn't designed to be buggered about with. Also, unless the hardware was identical to another device you can't simply load linksys firmware on to a non linksys device, or netgear firmware on to a non netgear device and so on as they would simply not work.
Grab a Netgear DGN2200 from your local currys/PCWorld or your favourite online retailer. Much less bother.

Similar Messages

  • HT5192 why i can't install new update software?

    hello people!my question ist:someone know why i can't install compleat my new Software instal on IPAD2.Please help me.....

    Impossible to say without more details other than "I can't install". If you'll post full details, including whether you're attempting to update from the iPad directly or from iTunes on a computer, where things are breaking down, what error messages if any you're getting, and any other details pertinent to your issue, then someone can perhaps offer suggestions.
    Regards.

  • I can't install new software update!

    I can't install new software update! for my Nokia 6500 slide.
    when install the new software on to my laptop, Vista home premium, service pack one.
    It give me this error "error 2738 could not access VBScript run time for cutom action".??????
    Can anyone help me please?
    How **bleep**.

    Impossible to say without more details other than "I can't install". If you'll post full details, including whether you're attempting to update from the iPad directly or from iTunes on a computer, where things are breaking down, what error messages if any you're getting, and any other details pertinent to your issue, then someone can perhaps offer suggestions.
    Regards.

  • I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

    I can't get the CS4 Design Standard to download onto my computer... I just purchased a new MAC and I can't install my old software.

    I'm having the same issue. All my applications transferred over. Lightroom is working, but when I went to edit a picture in Photoshop, I got an error message. It told me to restart, but the program still won't open after restart. It says licensing has stopped working, but what does that mean? I can't tell whether it's unsupported/blocked, or if it's a malfunction. The error code is 150:30 See screen shot.

  • Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

    Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

    A Core Duo Mac can't be upgraded past 10.6.8.
    (123371)

  • Hi, i have question about my macBook pro.  I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have.

    I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
    <Edited by Host>

    Cami87,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

    Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
    I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
    I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
    Thanks!

    The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
    The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
    I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
    The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
    Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
    You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
    Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • Can't Install New Apps

    I can't install new applications to my iPod Touch. I've restored the iPod, reset both it and the computer but it still won't work. The unknown error code is 0xE8000050.

    You may want to test with a different free app. Also try to restart the device, and try to sign out then back in the iPhone.
    Turn off Cellular data as that won't work if it's a huge app.

  • How can I make new pages software spellcheck a selection like in appleworks?

    How can I make new pages software spellcheck a selection like in appleworks?
    I just installed pages a new download from apple store.
    1. I cannot find any way to activate a spellcheck for a selection in a document.
    2. I want to elemenate a red line under a word it doesn't like the spelling of.

  • After installed Leopard, can't install any other software....help

    I just installed Leopard 10.5 into my Powerbook G4 17" 1.5Gz, but after that I can't install any other software, I try CS3 upgrade, new Poser7 and apple 10.5.1 upgrade, after I click install....nothing happen..... just the spining color wheel, try few time and wait for an hour... still the same, need help!

    In your utilities folder, in applications there's a program called disk utilities app. Go in there and click on your hard drive and click on disk permissions, first aid should also be highlighted. Post back if you require additional information. Good luck, and don't worry this is fixable.
    Ray

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • How can I install Photo Expressions software?

    How can I install Photo Expressions software?  I tried to drag and drop all items on to the Applications folder as I've done with other software, but this did not seem to work.

    Those are definitely windows files. Is it possible that the CD/DVD has a different folder for a Mac version of the program? If I have found the correct web site (Individual Software) there is no mention of a Mac version.
    Stedman

  • Can I install two different iPhoto applications on the same Mac?

    Can I install two different iPhoto applications on the same Mac?

    Please explain in more detail what you are wanting to do.
    Do you want to have two different versions of iPhoto, have two different Libraries or Share iPhoto with multiple users?
    Two different iPhoto versions (06 and 08, 08 and 09 for examples) is a problem and I say no because the older version can not use a Library that the newer version has modified. 
    For iPhoto support articles, see >  Apple - Support - Mac Apps - iPhoto
    To Share a Library with other users, see > iPhoto: Sharing libraries among multiple users
    To Move a Library, see > iPhoto '11: Move your iPhoto library to a new location

  • I still can´t install new Symbian ANNA, my Ovi Sui...

    I still can´t install new Symbian ANNA, my Ovi Suite and N8 still writte "No updates  availeble". I tried every option, which is avaible for update, but answer is still the same : "No updates  availeble". Do you know, where is problem and how can I fix it?
    Thanks for reply

    US typically gets the updates late because the laws there require certain additional software. For example, there the phones are required to transmit GPS data to 911 if the phone is capable of doing so, in other countries this piece of software is unneeded. Thats just one thing I can remember off the top of my head apart from the info that AFAIK software will also have to be approved by the FCC over there before it gets released.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for

  • Ipod touch is not showing up as a device in itunes, how can I sync it?

    Hi just wondering how to sync my ipod touch using itunes - when the ipod will not show up as a device. I am having trouble with the ipod as it is displaying the incorrect date, will not access my email etc. However when I go to sync it  (thinking thi

  • How long does it take to write data from network analyzer

    I am using LabVIEW to control two DC power supplies through GPIB-USB and I have a DAQ-6008 generating 8-bit digital output. I am connecting two DC power supplies and the 8-bit digital signal to my circuit and want to measure s parameters (all S11, S1

  • Strange problem with AAM, Alerts, and custom app

    Hello We have a custom app written by an outside vendor. There is a function of the app called merge that basically takes a template in a document library and is supposed to make a copy for editing. The function only works if the Default AAM is the i

  • Cannot select fields for calculating other fields~

    Help -- I am tryiing to get certain fiels in a form to calculate based on selection of other fields.  The fields to be selected already have values in them.  (The same format I have used for several years, just new set of forms) I get through the poi

  • SRM Error : Could not start transaction.

    The user want to approve the SC and is getting the error "Cannot Start the Transaction" "Return data for Work Item could not be read" Please let me know how to fix this issue.