Can i install oracle9i on a stand-alone system

Can i install oracle9i on a stand-alone system or does it need a server/client nodes and software?

Yes,
You can Insall Personal Edition of Oracle 9i. But this you have install from Server Edition CD only.
W/R
Vaj.

Similar Messages

  • General: can the OAF work as a stand alone application

    hi...
    can the OAF work as a stand-alone application??
    please help

    Thanks.
    OAF provides Developers with templates that utilise Oracle EBusiness technologies, for security, session handling, etc so cannot
    be used outside the eBusiness environment.
    The JDev version for eBiz is a specific eBiz version, but if you have non-eBiz programming requirement, you can still use this JDeveloper environment to create non-eBiz integrated applications. Alternativel
    you can use a seperate install of JDeveloper/ADF

  • Can Xserve  be used as a stand alone computer ?

    can Xserve be used as a stand alone computer ? ..
    with monitors and other hardware connected to it ?

    Yes.
    It's loud.
    70-some decibels of loud, particularly when the fans spool up.
    And you need a big flat spot, or a 19" rack.

  • Time capsule - WiFi - can it be used as a stand alone station?

    I have set up my Time Capsule as a WiFi station and it is showing as connected to my iMac, but the amber light it flashing and I cannot get it to go green.  Do I HAVE to connect it to my external router or can it be used as a stand alone WiFI station?  If so, how do I get the light to stop flashing?  The TC was connected by ethernet cable (green light) but that seemed to slow down my access to the Internet so I disconnected that.  Now I can see the back ups but cannot restore from any of them.
    Regards
    Oldmoondog

    The Time Capsule must connect to a modem or other router using a wired Ethernet connection.
    The only exception to this would be a setup where you have one Apple router set up as your "main" router connected to the modem.  In that case, it would be possible for the Time Capsule to connect to the main Apple router using a wireless connection.
    Assuming that the Time Capsule is operating correctly, and that it has been set up correctly, there should be no speed loss when a Time Capsule connects to a modem or other router using an Ethernet connection.
    For example, I have a 50 Mbps Internet connection plan from my Internet Service Provider (ISP). If I cannot the Mac directly to the modem, my speed is usually about 52-55 Mbps.
    If I connect the modem to the Time Capsule using Ethenret, then connect the Mac to the Time Capsule using Ethernet, the speed is almost exactly the same, about 51-54 Mbps.

  • Timezone Settings for Java Stand alone system

    Hi,
    I want to know the timezone settings that have been set for any Java stand alone system.
    Can anyone help me how to check the timezone settings at Java Stack?
    Incase if I want to change the timezone,which property do I need to change?
    Thank You.
    Regards,
    Sudheer.
    Moderator message - Moved to a less wrong forum
    Edited by: Rob Burbank on Jun 17, 2009 9:05 AM

    You can check it in at the end of System information page in Index.html page.

  • Proper way to install ADF Runtime in Stand Alone weblogic 10.3.3.0

    Hello:
    I found several different methods to install ADF Runtime in a stand alone weblogic server 10.3.3.0. and they seem to be very different.
    Does anyone know the official Oracle way to install the ADF Runtime or specific reference to this in the docs? The goal is to make a simple ADF web app, and get it working on a stand alone weblogic server.
    Thanks for looking at this post.
    Don

    You can either use the installer that comes with JDeveloper or the one that comes with the application developer installer for WebLogic.
    Info here:
    http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/deployment_topics.htm#CHDCDAIE

  • Can I run Story as a stand alone application?

    Need to know if I can install\run Adobe Story as a stand alone application, or do I need to access it via the Cloud, then use offline mode to simulate what I am looking for?

    Hi I'm having trouble with both the new update failing to install and not allowing me to login-on the desktop version. It's says my password is too long, when it's working fine everywhere else..?
    Many thanks,
    Samantha
    [email protected]
    http://uk.linkedin.com/in/sammihamer/

  • Where can I download Flash Player full stand alone installer?

    Hi,
    I need to download the full flash player stand alone package. This is because I need administrative rights to install flash player, but whilst our PC's are set up so one can not access the internet whilst logged on as administrator. (Go figure!)
    So I need to download the full package please.

    Hi,
    You can grab the stand alone installers here:
    Where can I find direct downloads of Flash Player for Windows or Macintosh?
    Chris

  • Can Motion be used as a stand-alone app, without FCPX?

    Can "Motion 5" be used as a stand-alone app, without FCPX?

    Yes.
    It's loud.
    70-some decibels of loud, particularly when the fans spool up.
    And you need a big flat spot, or a 19" rack.

  • If I have Logic Pro 7, can I install it on a Snow leopard system?

    I may be considering buying a Macbook Pro and I want to upgrade to Logic 9. However i don't want to have to shewll out £400 if I can just install Logic 7 and then upgrade to Logic Pro 9 for £163. Please let me know if this is possible with Snow Leopard.

    Many thanks for your reply!

  • Can I install EP in windows 7 Operating system

    Hi All,
    I have a question.
    Can I install EP and SAP NetWeaver Developer Studio on windows 7 Operating system?
    If any one has install it on Windows 7 operating system please guide me.
    Thanks
    Divyanshu

    Hi Divyanshu,
    The SPS21 support is only a client support (IE8 on Win7 will be fully supported from SPS21 on). There is no official support for the server being installed on Win7. Anyhow, with the XP mode (Windows Virtual PC), it should be possible; the integration of the XP mode into Win 7 is known as quite elegant, even if I have not watched it yet.
    Nevertheless, I will give this combination a try in a few weeks, as soon as my new laptop arrives...
    NWDS is a problem on 64bit (as far as I see, most power users install Win7-64 instead of Win7-32); see NWDS not working in 64 bit windows vista os for further details. Anyhow, you can go the XP-mode way also for this. As my new notebook will arrive in ~2 weeks, I will play around with the suggestions I have made by my own. So, if I have enough time, maybe I will post a blog some day in July/August/...
    Also see NDWS on Windows 7 with some valuable hints.
    Hope this helps
    Detlev

  • Can't install iLife '08 apps from original system disks

    First, I am embarrassed to admit that I only noticed this recently on my iMac which was purchased last June (08). I have fatefully installed all system and application updates since that time. Yesterday I discovered that the versions of all my iLife applications, except for iTunes, are version '07. This Mac was purchased directly from Apple and my understanding was this model came bundled with iLife 08. Indeed, the versions on the system installation disks that came with the Mac are '08! My only explanation for having the WRONG bundled software other than Apple shipping it that way, is that somehow transferring files from my old iMac to the new one resulted in this loss of version number. Again, I used Apple's software for the transfer process.
    I have attempted to install the correct versions from the system CD(DVD?) using the "Install Bundled Applications Only" installer. It will only allow me to install a 4KB file labeled something like "CPU updater." I do not wish to waste hours backing up the whole iMac, reinstalling the System from scratch, reinstalling backed-up files, reregistering and configuring other installed software and hoping that I didn't miss anything.
    *Is there there an easier way to just install the proper iLife version?* Am I missing something obvious here? Please help!
    TIA,
    Russ

    Well isn't that confusing? Sounds more like something Micro$oft would do.
    I'm still not sure why all the apps were grayed out in the custom install. Is that because they are already on disk? What if one was corrupt and I wanted to replace it?
    So what versions am I likely to find in iLife 09 should I decide to upgrade?
    Thank you for clearing this up and for reading my post carefully rather than giving a stock answer like "Use your system restore disks, dummy!" I so hate it when others offer pseudo "help" without taking time find out what you have already tried or know.
    Many thanks for a truly helpful response,
    Russ
    Message was edited by: RCGlass

  • Can't install Oracle9i Personal on Windows Me

    I downloaded the 3 files for Oracle9i Personal. I unzip each file and place the resulting files into 3 separate folders. I go into folder 'disk1' and click on the "setup" file. The universal installer starts up. I currently have NO installed products. It's asks me for the source: the path to the file representing the product I want to install. I use the browser button to locate it at
    C:Oracle\disk1\stage\products.jar
    For the destination I let it default the name Home Name to "OraHome922". I use the browse button to navigate the destination path to "C:\oracle\ora9". This directory does exist.
    When I press the NEXT button it says it's "Loading products..." in the upper right-hand corner of the window.
    Then an error window opens saying:
    Invalid staging area. There are no top level components for Windows 95, Windows Me available for installation in this staging area.
    What does this mean? How do I get Oracle to install?
    Thanks for taking the time to read all of this... I greatly appreciate any help you can give!!!

    Has anyone ever found the answer to this?
    I tried adding the JREW=0x0008000 to the win.ini
    but that didn't work..

  • How can i run my java Application stand alone?

    Dear all,
    As the topic i want to run my application in a single file without showing the dos prompt or type in the command in dos prompt by the user......
    How can i do that, since in my application , i have used so other package?
    In fact i just want to do something like just run a executable file in windows.
    Thx

    Sounds like your JRE didn't install properly. Either reinstall it or you can enter the file association manually.
    On Windows NT (it may be different on other versions of Windows) take the View/Options menu item from an Explorer window
    Click on the File Types tab.
    Click the "New Type" button.
    Give it the name "Executable jar file" and an associated extension of jar
    Click the "New.." button
    Make the action open
    Make the application something like
    "C:\Program Files\Java\j2re1.4.0\bin\javaw.exe" -jar "%1"
    changing it for your installation.
    Col

  • Installing and Configuring Oracle stand alone grid  Using Response Files

    Hello ,
    I am looking for some help if you have done the oracle restart (standalone grid) installation using response file , when i tried to install using response files it is not creating the ASM disks , so i might be missing some steps . Can you please share if you have done this installation of if you have a right document to do this .
    Version i am using 11.2.0.3
    OS : Linux
    Thanks
    Venkat

    Use the following in response file, replace oracle_base,oracle_home,oracle_hostname,diskgroup name,redundancy,disks as per your
    environment
    oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v11_2_0
    ORACLE_BASE=/u01/oracle
    ORACLE_HOME=/u01/product/11.2.0/grid
    INVENTORY_LOCATION=/oracle/install/oraInventory
    ORACLE_HOSTNAME=rhel5
    oracle.install.option=HA_CONFIG
    SELECTED_LANGUAGES=en
    UNIX_GROUP_NAME=dba
    oracle.install.asm.diskGroup.name=DATA
    oracle.install.asm.diskGroup.redundancy=EXTERNAL
    oracle.install.crs.config.autoConfigureClusterNodeVIP = false
    oracle.install.asm.SYSASMPassword=test
    oracle.install.asm.monitorPassword=test
    oracle.install.asm.diskGroup.disks=/dev/oracleasm/disks/TEST01,/dev/oracleasm/disks/TEST02
    oracle.install.asm.diskGroup.diskDiscoveryString=/dev/oracleasm/disks/*
    oracle.install.asm.OSDBA=asmdba
    oracle.install.asm.OSOPER=asmoper
    oracle.install.asm.OSASM=asmadmin
    oracle.install.asm.upgradeASM=false
    oracle.install.crs.config.gpnp.scanPort=0
    oracle.install.crs.config.clusterName=
    oracle.install.crs.config.gpnp.configureGNS=true
    oracle.install.crs.config.gpnp.gnsSubDomain=
    oracle.install.crs.config.gpnp.gnsVIPAddress=
    oracle.install.crs.config.autoConfigureClusterNodeVIP=false
    oracle.install.crs.config.clusterNodes=
    oracle.install.crs.config.storageOption=
    oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=
    oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
    oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
    oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
    oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
    oracle.install.crs.config.useIPMI=false
    oracle.install.crs.config.ipmi.bmcUsername=
    oracle.install.crs.config.ipmi.bmcPassword=
    oracle.install.crs.config.privateInterconnects=
    oracle.install.crs.config.gpnp.scanName=
    oracle.install.crs.upgrade.clusterNodes=

Maybe you are looking for

  • Email submit button pdf file

    I have Adobe Acrobat 9 Pro, Adobe Reader X, and LiveCycle Designer. I have a pdf file that I would like to be sent back to me in pdf format when the submit button is clicked. I created the button in LiveCycle Designer, and Extended features to adobe

  • Camera Raw 7.3 Updating in PS CS6

    How do I update my Camera Raw from 7.0 to 7.3? I have a Nikon D600 and need to import my RAW(NEF) files for editing. I tried searching the web and found no conclusion. It says to use the 'update mechanism in PS CS6', but I don't know what that means.

  • Axis Label Issue

    My application creats custom graphs using AS3 and a mySQL database. Almost all of the graphs render just fine, except I have one that is supposed to set its vertical axis min to 0% and its max at 75% with intervals every 25%, and yet its labels rende

  • DAQ and Encoder Connections

    "Please help a DAQ/Motion neophyte .... I'd like to synchronize/correlate a load cell output with the a linear stage position via the on-board encoder. The on-line documents show Ch.A to PFI8_Source, Ch.B to DIO6_Up_Down, and GND to DGND. However, th

  • How to export files with metadata information displayed?

    I want to wash my .jpg files through LR 5 in order to display the filenames.  Via the Slideshow module I have been able to select and direct the displaying of the desired metadata option.  When I export the files the displayed metadata information do