Can I install SCXI-1200 and other NI-DAQ devices on the same computer?

I have the following three devices connected to my computer right now: PCI-MIO-16E-1, AT-MIO-16E-2, SCXI-1200(connected to SCXI-1001 chasis).
For some reason, the 2 E-Series devices (PCI-MIO-16E-1 and AT-MIO-16-E-2) function properly, while the SCXI-1200 always times out when I try to test it. (a base address error is returned). I tried all the trouble shooting procedures listed in this website but didn't succeed.
Is there a compatibility problem between the devices?

Hello;
The main question is; did you try the scxi-1200 by itself on the machine (without having the other devices hooked up to the machine)?
It's important to narrow down the problem to a multidevice compatibility problem or a SCXI-1200 problem.
Regards
Filipe A.
Applications Engineer
National Instruments

Similar Messages

We have an Ipad and two Iphones. We have an internet radio program we like. One of the phones plays it fine the Ipad and other Iphone which sync on the same computer will only play a short time and we can't reconnect again until the following week? They a

Hi there. We have two iphone 3gs' and an Ipad 2 all operate on IOS 5 but one of the iphones syncs on another computer. The other two sync on our other computer. Those two will only play internet radio for a short time and then they stop playing the program while our third will play all the way through and we can always get back to the program. Does anyone have any thoughts as to why this happens? Thank you

Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc.

Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7?

Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7 (64-bit)?

Yes, but it needs to have at least two copies of Windows installed.
(94491)

How can I share applications and softwares with different users of the same computer?

First question: How can I share applications and softwares with different users of the same computer?
Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
Yes. Separate user accounts, help here > How to use multiple iPods, iPads, or iPhones with one computer

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

If all you want is an additional email address you can create up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.

Can you use home share where there are 2 itunes on the same computer but under different user profiles?

Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

I have two iPads and one iPod Touch and they are using iTunes on the same computer.

I have two iPads and one iPod Touch and they are using iTunes on the same computer. I have not been able to backup the second iPad. Is there a reason this is happening? iPad one is an iPad 1 and the second is an iPad 2 not sure if this has something to do with it. I just tried to upgrade to IOS 5 and when it went to back up it gave me an error code (-5000). I tried to back up using iTunes and it told me that my backup was corrupted and to delete it and try to back up again. When I went into the device portion where I was instructed to go to delete the backup I found that there was no backup for my iPad just the iPad 1.
I have synced many times and all of the apps, podcasts, music, etc... show up in iTunes, and iTunes recognizes that is is the second iPad but there is not a backup for it.
Any Ideas?

Read this: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

Using facetime and ichat on different devices under the same apple account

using facetime and ichat on different devices under the same apple account

Redeem it on any one; it'll be available to the others automatically.
(119212)

About Premiere: can Adobe CC and Adobe CS6 both run in the same computer?

Hi, I have the Adobe Premiere CS6 installed in my computer.
But now I'm gonna finish the edit of a film that someone already started editing.
This person was working with Adobe Premiere CC.
The question: If I install Adobe CC in my computer, will the Adobe CS6 still run?
Can Adobe Premiere CC and Adobe Premiere CS6 both run in the same computer?

Sure , you can run all the version of same computer , even you can CC 2014 , CC as well as CS 6 on same computer .

SCXI 1112 and 1302 doesn't run at the same time

Hi,
I have SCXI 1112 thermocouple input module, SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
Could you please give me some advice to solve this problem?
Thanks,
Azra

One piece of the puzzle you left out is the DAQ card being used in the host computer.
Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module. Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ.
I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis. Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
Hope this might help.
RS

Can I use both ePrint and AirPrint on an HP4630 at the same time

I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
I appreciate your help.
This question was solved.
View Solution.

Hello Chesher5,
Welcome to the HP Support Forums!
Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
If you have any problems setting up or using either, please let me know and I'll do my best to assist.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I get iTunes to update play counts and file additions between users on the same computer?

I have placed my iTunes library in /Users/Shared/iTunes along with iTunes Music Library.XML
When I open iTunes, all the music is displayed correctly with playcounts etc...
The problem is, when a playcount or album info is updated it does not carry over to the other user on the same computer. The same with adding new files to the iTunes library...
How can I get iTunes to auto-update between users?
Thanks

Tempeleton Peck
I understand how to do that, I was looking to share all fodlers or a bunch of folders. I found out how to do it.
Paul

Can i run UDP client and UDP server socket program in the same pc ?

hi all.
when i execute my UDP client socket program and UDP server socket program in the same pc ,
It's will shown the error msg :
"Address already in use: Cannot bind"
but if i run UDP client socket program in the remote pc and UDP server socket program run in local pc , it's will success.
anybody know what's going on ?
any help will be appreciated !

bobby92 wrote:
i have use a specified port for UDP server side , and for client define the server port "DatagramSocket clientSocket= new DatagramSocket(Server_PORT);"Why? The port you provide here is not the target port. It's the local port you listen on. That's only necessary when you want other hosts to connect to you (i.e. when you're acting as a server).
The server should be using that constructor, the client should not be specifying a port.
so when i start the udp server code to listen in local pc , then when i start UDP client code in local pc ,i will get the error "Address already in use: Cannot bind"Because your client tries to bind to the same port that the server already bound to.

Can I connect 2 iPhones and have 2 separate icloud accounts on same computer

Is there a way to connect 2 iPhones to the same computer and have 2 separate icloud accounts and iTune accouts?

It might be a good idea to check out this article as well.
How to use multiple iPods, iPads, or iPhones with one computer
B-rock

Can I install SCXI-1200 and other NI-DAQ devices on the same computer?

Similar Messages

Maybe you are looking for