Can i install snow leopard server on a macbook?

hi,
i have to do some tests with snow leopard server. can i install it on a macbook white unibody bought one mounth ago? i don't want to buy a desktop mac to do this.
bye.
ls

Sure, as long as it meets the hardware specs.

Similar Messages

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

Can I install Snow leopard server on the new Mac Mini Lion server?

Hi guys, I purchased a Lion Server and I am wondering if its possible to install Snow Leopard server on it.
I have the Snow Leopard Server install discs and everything , just wondering if there is any thing I should take note of, I personally prefer SLS over Lion.
What do you guys think?

There's a huge thread on this (client, not server, but same concept) which you can find here.
https://discussions.apple.com/thread/3209335?tstart=30

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

Can I install Snow Leopard on the latest Macbook Pros? (the ones pre-loaded with Lion)

The problem and solution is pretty simple, I just want to know if anyone has tried this before. I have a brand new Macbook Pro that I bought more or less for the sole purpose of having a more powerful machine to run AVID Media Composer on. AVID is only compatible up to OS version 10.6.7 at the moment, and the machine I got was pre-loaded with Lion, 10.7....So I look at the support documentation Apple provides, and notice that in the nifty little chart they have, the latest line of Macbook Pros out there (early 2011) originally had version 10.6.6, so I'm assuming that's the previous version I can't downgrade past.
To revert back to Snow Leopard, however, I need to install it from the DVD which has version 10.6.3 on it, and then upgrade to any version between Snow Leopard 10.6.6 and Lion 10.7. In theory this could work, the only problem being that for a brief time between installing Snow Leopard and updating to the version of it that I need, the computer will have version 10.6.3 on it.
Now I'm pretty sure if the only thing I do on the computer is immediately update to a safe-to-use version, there will be no problems. However, if the machine's hardware is so terribly non-backwards compatible with the Snow Leopard OS, I may do all this backing up and reverting and not even be able to start the computer once I get the old install on it. Before I just go ahead and try this for myself, I was wondering if anyone else has, and more importantly, have you had any success?

Hi r,
EDIT: disregard my post. Waiting for that disc is a far better option.
I hope w won't mind if I add a thought here:
rmo348 wrote:
Now I don't mind if some drivers are messed up and resolution is all funky when I install 10.6.3 on it, I just need to know if it'll be functional to the point where I can run the 10.6.6 update dmg. Once I update to 10.6.6 everything should work fine.
Or could I install 10.6.3, have the 10.6.6 update burned to a disc, and boot straight from that? This is my first Mac so I'm not sure what little tricks work or not.
Your first idea may work; the only way to know for sure is to try it. If you do, make sure you download and run the Combo update for 10.6.7 or 10.6.8. There can be different versions of a point update, those which are available for download, and those which ship on Macs, so you want to install one beyond that which shipped with some of the new MBPs.
If the MBP won't boot to 10.6.3, something else to try is installing it to an external HD, then installing the 10.6.7 update on it, clone it to the MPB's internal HD, and run the 10.6.7 or 10.6.8 Combo update on it.

Can I install snow leopard server in a partition ofsnow leopard?

Hi, there!
I have a Mac Pro with snow leopard and windows 7 in boot camp. I also bought the server software and I'd like to know if it's possible to install the server software without losing the other installations. Is any of the following possible?
1.-Installing SL server in a new partition without losing SL & windows or,
2.-Replacing snow leopard with SL server without losing windows in bootcamp
3.-If none of the above is possible I'll have to lose both, I guess.
Thank you all in advance.

You can at least either upgrade SL to SLS or replace SL with SLS - shouldn't affect BootCamp.
I don't know what happens if you try to repartition the drive.
It should be possible to repartition it without losing any data but BootCamp might not accept more than 2 partitions on one drive.
If you want all 3, install another drive, internal or external.

Can i install snow leopard on my new macbook pro which came loaded with Lion?

My new MBP came loaded with Lion. Can i install S.L. on it?

Don't install a version of Mac OS X earlier than what came with your Mac

Can I install Snow Leopard on MacBook Pro 2013

Can I install Snow Leopard on my new MacBook Pro 2013. I'm so tired of the UGLY grey icons. I keep thinking that the mail or iPhoto window is not the active one because everything is grey. I use Snow Leopard on my 27inch iMac and love it. Nice RED delete button for mail, etc. Thanks

Firmware restrictions prevent directly loading any OSX earlier than what came with the system.
The *only* way around is to load SnowLeopard *Server* (not Client) into a virtual machine (Parallels, VMWare Fusion, VirtualBox). But that costs $20+shipping/tax for the disk and is a learning curve into SL Server. And you *still* need your host OSX to run it, and the VM will not most efficiently use the hardware resources.

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music

I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?

Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

Can't install snow leopard on partition after upgrading to lion

I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMay

Hi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay

Can't install Snow Leopard on a MacBook

Hi guys...
A friend of mine brought me his Macbook to fix it because the hard drive was making sounds and now won't boot.
The drive in fact is bad, it barely mount, makes noises, etc.
I've replaced the internal hard drive for a Toshiba 320gb SATA 3.
The thing is that apparently the DVD doesn't recognize my drive and of course, i can't install Snow Leopard.
My question is, is this a problem with the new drive?. I believe that being a SATA3 could be causing the problem.
Second question... Can i install Snow Leopard (somehow) using my Mac mini?
Thanks so much and i hope you can help me.
Regards.
Francisco.

Hi!!
>I've used another internal hard drive and installs correctly<
Using the DVD installer?
Yes
So it boots with another hard drive in there but ejects when you put the Toshiba in there?
Yes but it only make sense if the DVD would create a temporary partition or something in order to install the OS.
>Could it be that the drive is SATA3? <
Even so it would be downwards compatible.
I though so too
>or maybe the hd is bad?<
That would make more sense.
I'm going to clone the installation that went OK in order to see if it's actually my internal drive the problem.
Could it be the manufacturer?
Thanks so much and i'll let you know.
Regards.
Francisco.

I can't install Snow leopard on my hard disk which has 10.4.11 on and lots of space.

I can't install Snow leopard on my hard disk which has 10.4.11 on it and lots of space, I run the snow Leopard install disk and it says it cant be installed on my hard disk, which has 160 GB of space.

Which iMac? If it's a G5, the highest OS you can run is Leopard. Are you using the full retail copy of Snow, or a grey, machine specific disc from another computer? If it's the latter, that's the reason.
Message was edited by: WZZZ

Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.

can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?

I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
Can I start from USB Memory? with files from SL DVD? or have some thing else?
I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
Really Thanks for any help.
Pablo

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

Can i install snow leopard server on a macbook?

Similar Messages

Maybe you are looking for